Tamson Catalogue - Andreescu Labor & Soft
Tamson Catalogue - Andreescu Labor & Soft
Tamson Catalogue - Andreescu Labor & Soft
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
43<br />
Flash Point Standards<br />
ASTM D 92 & ASTM D93<br />
APPLICATION<br />
ISO 17025 / ISO Guide 34 certified PMCC Flash Point Standards are tested and certified in accordance with<br />
ASTM D93 ‘Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester – Procedure A’.<br />
Procedure A is applicable to distillate fuels – diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and<br />
lubricating oils. ISO 17025 / ISO Guide 34 certified COC Flash Point Standards are tested and certified in<br />
accordance with ASTM D92 ‘Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.<br />
These UKAS certified standards are specifically designed to be used for regular instrument performance checks.<br />
Packed uniquely in 3 x 80ml ‘single shot’ bottles assuring the highest level of sample integrity. An economical,<br />
time saving addition to any laboratory concerned with the generation of valid analytical test data.<br />
Typically used in, but not limited to, the analysis of petroleum products with flash points above 40°C (COO) or<br />
79°C (PMCC) and below 360°C.<br />
MAIN CHARACTERISTICS<br />
UKAS certified to ISO 17025.<br />
UKAS certified to ISO Guide 34.<br />
Manufactured in accordance with ASTM D 92 or ASTM D 93(a).<br />
Ensures full compliance to ASTM and IP test method protocols.<br />
Supplied in tamper evident packaging with a 12 month shelf life.<br />
Packaged in 3 X 80mL bottles - 'One shot', one bottle per test<br />
ensures zero contamination / high end volatile loss.<br />
Fully traceable to International Standards.<br />
Supplied with MSDS.<br />
Flashpoint standards<br />
Secondary working Flash Point Standards<br />
FP-COC-1 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 85.0°C 3 X 80mL<br />
FP-COC-6 Cleveland Open Cup Flash Point ASTM D92 Hydrocarbon 112°C 3 x 80mL<br />
FP-COC-3 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 149°C 3 x 80mL<br />
FP-COC-4 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 193 °C 3 x 80mL<br />
FP-COC-5 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 257 °C 3 x 80mL<br />
FP-PMCC-1* Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 56.5°C 3 x 80mL<br />
FP-PMCC-2 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 76.5°C 3 x 80mL<br />
FP-PMCC-7 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 100.5°C 3 x 80mL<br />
FP-PMCC-3 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 116.0°C 3 x 80mL<br />
FP-PMCC-4 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 140.0°C 3 x 80mL<br />
FP-PMCC-5 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 186.5°C 3 x 80mL<br />
FP-PMCC-6 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 232.0°C 3 x 80mL<br />
*Hazardous to ship, additional surcharge for shipping.<br />
Primary level CRM Flash Point Standards<br />
<strong>Tamson</strong> supplies the World’s first Primary level CRM Flash Point Standards which are dual certified under UKAS.<br />
These six new Primary level Certified Reference Materials are certified for Flash Point in full accordance with the<br />
requirements of ASTM D 92 (Cleveland Open Flash Point) or ASTM D 93 (Pensky-Martens Closed Cup Flash<br />
Point). They are certified in accordance with UKAS accreditation to ISO 17025 / ISO Guide 34 by means of a<br />
method specific inter-laboratory study. These CRM’s are intended to be used at least once a year for<br />
instrument and/or method verification in accordance with ASTM D 92 or ASTM D 93.<br />
CRM-COC-LOW Cleveland Open Cup Flash Point ASTM D 92 Mineral Oil 85.0°C 3 X 80mL<br />
CRM-COC-MID Cleveland Open Cup Flash Point ASTM D92 Mineral Oil 153°C 3 x 80mL<br />
CRM-COC-HIGH Cleveland Open Cup Flash Point ASTM D 92 Mineral Oil 262°C 3 x 80mL<br />
CRM-PMCC-LOW Pensky Martens Flash Point ASTM D 93 Mineral Oil 77°C 3 x 80mL<br />
CRM-PMCC-MID Pensky Martens Flash Point ASTM D 93 Mineral Oil 141°C 3 x 80mL<br />
CRM-PMCC-HIGH Pensky Martens Flash Point ASTM D 93 Mineral Oil 228°C 3 x 80mL<br />
<strong>Tamson</strong> Instruments B.V. T. + 31 10 522 43 73 VAT: NL 80 66 34 984 B01<br />
Van ’t Hoffstraat 12 F. + 31 10 521 19 41 Rabobank: 16 01 00 046<br />
2665 JL BLEISWIJK www.tamson.com Chamber of Commerce: 271 69 541<br />
The Netherlands<br />
sales@tamson.com