PARTNER K950 Operators Manual 1998.pdf
PARTNER K950 Operators Manual 1998.pdf
PARTNER K950 Operators Manual 1998.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL DATA<br />
Engine<br />
Cylinder volume, cm 3/ cu.in 93,6/5,7<br />
Cylinder bore, mm/inch ∅ 56/2,2"<br />
Stroke, mm/inch 38/1,5"<br />
Idle speed, rpm<br />
2 500 rpm<br />
Recommended max. speed, unloaded, rpm 9 800 ± 300<br />
Power, kW 4,5<br />
Ignition system<br />
Manufacturer<br />
FHP<br />
Spark plug<br />
Champion RCJ-7Y<br />
Electrode gap, mm/inch 0,5 (.020")<br />
Fuel and lubrication system<br />
Manufacturer<br />
Tillotson<br />
Carburettor type<br />
HS 282A<br />
Fuel capacity, litre/US Pint 1,0/2,10<br />
Weight<br />
Without fuel and cutting blade, kg/Lbs<br />
12" (∅ 300 mm) 9,9/21,8<br />
14" (∅ 350 mm) 10,3/22,7<br />
16" (∅ 400 mm) 11,2/24,7<br />
Sound levels<br />
Equivalent (see note 1) sound pressure level at<br />
the user’s ear, measured according to EN 1454<br />
and ISO/DIS 11201, dB(A). 102,6<br />
Equivalent (see note 1) sound power level, measured<br />
according to EN 1454 and ISO 3744, dB(A). 111,7<br />
Vibration levels<br />
Handle vibrations measured according to EN 1454.<br />
Front handle, idling, m/s 2 8<br />
Front handle, full speed, m/s 2 6<br />
Rear handle, idling, m/s 2 9<br />
Rear handle, full speed, m/s 2 8<br />
Note 1. Equivalent sound level is calculated as the time weighted energy total<br />
for sound levels under different operating conditions during the following time<br />
divisions 1/2 idling, 1/2 full speed.<br />
Cutting equipment<br />
Cutting blade Gear ratio Max. peripherical speed<br />
12" 0,52 80 m/s<br />
14" 0,52 100 m/s<br />
16" 0,42 100 m/s<br />
EU declaration of conformity (Only applies to Europe)<br />
(Directive 89/392/EEC, Annex II, A)<br />
We, Partner Industrial Products, S-433 81 Partille, Sweden, tel. +46-31-949000, declare under sole responsibility that the<br />
power cutter Partner <strong>K950</strong> Active from the serial numbers of 1998 and onwards (the year is clearly stated in plain text on the<br />
type plate with subsequent serial number), is in conformity with the following standards or other normative documents following<br />
the provisions in the COUNCIL’S DIRECTIVES:<br />
- of June 14 1989 “relating to machinery” 89/392/EEC and applicable supplements.<br />
- of May 3 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.<br />
The following standards have been applied: EN292-2, EN1454.<br />
Partille October 19, 1998<br />
Bo Andréasson, Development manager.<br />
22 – English<br />
´*xl^6\¨
Change language