PARTNER K950 Operators Manual 1998.pdf

More documents

Recommendations

Info

TECHNICAL DATA Engine Cylinder volume, cm 3/ cu.in 93,6/5,7 Cylinder bore, mm/inch ∅ 56/2,2" Stroke, mm/inch 38/1,5" Idle speed, rpm 2 500 rpm Recommended max. speed, unloaded, rpm 9 800 ± 300 Power, kW 4,5 Ignition system Manufacturer FHP Spark plug Champion RCJ-7Y Electrode gap, mm/inch 0,5 (.020") Fuel and lubrication system Manufacturer Tillotson Carburettor type HS 282A Fuel capacity, litre/US Pint 1,0/2,10 Weight Without fuel and cutting blade, kg/Lbs 12" (∅ 300 mm) 9,9/21,8 14" (∅ 350 mm) 10,3/22,7 16" (∅ 400 mm) 11,2/24,7 Sound levels Equivalent (see note 1) sound pressure level at the user’s ear, measured according to EN 1454 and ISO/DIS 11201, dB(A). 102,6 Equivalent (see note 1) sound power level, measured according to EN 1454 and ISO 3744, dB(A). 111,7 Vibration levels Handle vibrations measured according to EN 1454. Front handle, idling, m/s 2 8 Front handle, full speed, m/s 2 6 Rear handle, idling, m/s 2 9 Rear handle, full speed, m/s 2 8 Note 1. Equivalent sound level is calculated as the time weighted energy total for sound levels under different operating conditions during the following time divisions 1/2 idling, 1/2 full speed. Cutting equipment Cutting blade Gear ratio Max. peripherical speed 12" 0,52 80 m/s 14" 0,52 100 m/s 16" 0,42 100 m/s EU declaration of conformity (Only applies to Europe) (Directive 89/392/EEC, Annex II, A) We, Partner Industrial Products, S-433 81 Partille, Sweden, tel. +46-31-949000, declare under sole responsibility that the power cutter Partner <strong>K950</strong> Active from the serial numbers of 1998 and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), is in conformity with the following standards or other normative documents following the provisions in the COUNCIL’S DIRECTIVES: - of June 14 1989 “relating to machinery” 89/392/EEC and applicable supplements. - of May 3 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements. The following standards have been applied: EN292-2, EN1454. Partille October 19, 1998 Bo Andréasson, Development manager. 22 – English ´*xl^6\¨
English – 23
Page 1 and 2: K950 ACTIVE Operator’s manual Rea
Page 3 and 4: Before using your new Power cutter
Page 5 and 6: SAFETY INSTRUCTIONS 3 Muffler ! WAR
Page 7 and 8: Fuel safety (Filling/Fuel mixture/S
Page 9 and 10: Pull in Pull in occurs when the low
Page 11 and 12: Type of cutting blades Check that t
Page 13 and 14: ASSEMBLY Fitting the cutting head F
Page 15 and 16: Start and stop ! WARNING! Before st
Page 17 and 18: Carburettor Your Partner product ha
Page 19 and 20: Starter MAINTENANCE Tensioning the
Page 21: MAINTENANCE 2 5 9 4 11 15 17 1 6 20

PARTNER K950 Operators Manual 1998.pdf

Create successful ePaper yourself

Delete template?

Save as template?