Analytical Measurement - Nuova Elva
Analytical Measurement - Nuova Elva
Analytical Measurement - Nuova Elva
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
JUMO GmbH & Co. KG<br />
Delivery address:Mackenrodtstraße 14,<br />
36039 Fulda, Germany<br />
Postal address: 36035 Fulda, Germany<br />
Phone: +49 661 60 03-0<br />
Fax: +49 661 60 03-6 07<br />
E-mail: mail@jumo.net<br />
Internet: www.jumo.net<br />
JUMO Instrument Co. Ltd.<br />
JUMO House<br />
Temple Bank, Riverway<br />
Harlow, Essex CM20 2TT, UK<br />
Phone: +44 12 79 63 55 33<br />
Fax: +44 12 79 63 52 62<br />
E-mail: sales@jumo.co.uk<br />
JUMO PROCESS CONTROL INC.<br />
885 Fox Chase, Suite 103<br />
Coatesville PA 19320, USA<br />
Phone: 610-380-8002<br />
1-800-554-JUMO<br />
Fax: 610-380-8009<br />
E-mail: info@JumoUSA.com<br />
Internet: www.JumoUSA.com<br />
Data Sheet 20.2820<br />
Page 1/7<br />
Immersion fittings<br />
Series 202820<br />
Brief description<br />
Immersion fittings are used for holding electrochemical sensors (e.g. pH and redox electrodes,<br />
glass conductivity cells, compensation thermometers etc.) with a Pg13.5 screw-in<br />
thread and a fitting length of 120mm.<br />
Fitting types for up to 3 sensors are available.<br />
The fittings are mounted in open sluices or containers. They protect the installed sensor<br />
from breaking and enable measurement in different immersion depths. Thanks to various<br />
options and accessories, the fittings can be optimally adjusted to the conditions on site.<br />
Two pipe clips for wall mounting are provided for the standard versions, but sliding flanges,<br />
which are available as an option, also permit installation in container lids, for example.<br />
The following points have to be taken into account:<br />
■ The fittings must be readily accessible, to ensure that the sensor can be cleaned and<br />
serviced at regular intervals.<br />
■ pH and redox electrodes must not be allowed to remain dry for a prolonged period -<br />
this can be prevented by using a wetting cup.<br />
■ The suitability of the materials (e.g. chemical compatibility) has to be tested by the<br />
system designer.<br />
202820/063...<br />
202820/040...<br />
Installation options<br />
Standard<br />
Use of a wetting cup<br />
Fixing<br />
with pipe clips<br />
in the inlet channel<br />
Fixing<br />
with a flange<br />
on a container<br />
with the container filled<br />
with empty container<br />
(residual liquid in the cup<br />
prevents the sensor from<br />
running dry)<br />
07.05/00388381