SL-D7 SL-D8Z

More documents

Recommendations

Info

$C:\Disegni\Riuniti\66R Ecoline\Documentazione\66R-hydr Manuale ...$

SECURING THE BINOCULAR TUBES 1 Align the pin of the microscope unit with the groove on the binocular tubes, and fit the screw with a hexagon wrench. In the model without excitor/barrier filter, fit binocular tube with the fixing screw. Make sure you do not touch the lens surfaces. Screw Microscope unit * The illustration depicts the <strong>SL</strong>-<strong>D7</strong> SECURING THE ILLUMINATION UNIT 1 Loosen the microscope arm locking-knob of the base unit, manually turn the shaft and tilt the guide rod-shaft index 30-60°, then refasten the microscope-arm locking-knob. 30° - 60° Indices 18 ASSEMBLY PROCEDURE
2 Loosen the fixing screw on the outside of the fitting cavity of the illumination unit with a screwdriver. Align indices and slowly lower the illumination unit onto the shaft of the base unit. Indices While assembling the illumination unit, take care not to get your fingers caught. 3 Firmly tighten the fixing screw with a screwdriver. REMOVING THE ILLUMINATION UNIT PAD 1 Remove the rubber band and slowly withdraw the protection pad from the slit operation mechanism of the illumination unit. Protection pad (for transportation) 19 ASSEMBLY PROCEDURE
Page 1: INSTRUCTION MANUAL SLIT LAMP SL-D7
Page 4 and 5: MAINTENANCE AND CHECKS 1. Regularly
Page 6 and 7: SAFETY CAUTIONS CAUTION Icons Preve
Page 8 and 9: MAINTENANCE USER MAINTENANCE To mai
Page 10 and 11: CONTENTS INTRODUCTION .............
Page 12 and 13: CONFIGURATION NAMES OF MAIN BODY CO
Page 14 and 15: Spare chinrest tissue pin (2) Instr
Page 16 and 17: Article name Qty Article name Qty (
Page 18 and 19: SECURING THE UNIT TYPE TABLE TOP 1
Page 22 and 23: CONNECTING AND SECURING OF CABLES 1
Page 24 and 25: 2 Remove the fixing knob of the mic
Page 26 and 27: COUNTER-BALANCE PROCEDURE 1 Turn th
Page 28 and 29: 11 Holding the prism box, look thro
Page 30 and 31: OPERATING THE MICROSCOPE UNIT SL-D7
Page 32 and 33: OPERATING THE ILLUMINATION UNIT CAU
Page 34 and 35: Centering knob INCLINED ILLUMINATIO
Page 36 and 37: AMBER FILTER The amber filter is us
Page 38 and 39: TROUBLESHOOTING TROUBLESHOOTING GUI
Page 40 and 41: SL-D7 Dimensions, Weight Dimensions
Page 42 and 43: SYSTEM CONFIGURATION SL-D7/D8Z Syst
Page 44 and 45: MAINTENANCE AND CHECKUPS MAINTAININ
Page 46 and 47: PLACING AN ORDER FOR CONSUMABLES
Page 48 and 49: REPLACING FUSES CAUTION When replac
Page 50 and 51: CLEANING THE SLIDING PLATE, RAIL AN
Page 52 and 53: ELECTRONIC FLASH DEVICE FD-21 FEATU
Page 54 and 55: TV RELAY LENS TL-54/55 (BUILT-IN BE
Page 56 and 57: OBSERVATION TUBE FEATURES • Used
Page 59 and 60: When contacting us, please have the

SL-D7 SL-D8Z

Create successful ePaper yourself

Delete template?

Save as template?