SL-D7 SL-D8Z

More documents

Recommendations

Info

$C:\Disegni\Riuniti\66R Ecoline\Documentazione\66R-hydr Manuale ...$

MAINTENANCE AND CHECKUPS MAINTAINING THE PRECISION ADJUSTING THE SLIT WIDTH CONTROL KNOB TORQUE • If the slit width narrows by itself due to a decrease in slit width control knob torque, adjust the torque as follows. 1 Using the attached hexagon wrench, loosen the slit width control knob. 2 Press the slit-width control knob on the left-hand side, and turn the right-hand side clockwise. 3 Fasten the slit width control knob on the right-hand side with the hexagon wrench. ADJUSTING THE INCLINATION TORQUE • If the inclination torque of the illumination unit is too low, fasten the arm inclination by tightening the screws clockwise on both sides of the arm. * The illustration depicts the SL-D7 type. 42 MAINTENANCE AND CHECKUPS
PERIODIC MAINTENANCE Before using, confirm the following: • Adjust the diopter and eye width following “ADJUSTING THE DIOPTER AND PUPILLARY DISTANCE (PD)” on page 25 and turn the slit adjustment knob and make the slit width about 1mm: The slit image projected on the test rod is seen clearly. • Move the base forward-backward and right-left: The base moves smoothly. • Component parts, including the eyepiece unit, are fitted in place. • The chinrest base is firmly fitted to the table. • Cables and plugs are firmly connected. DAILY CARE • This instrument may be affected adversely by dust. Apply the dust cover when not using. 43 MAINTENANCE AND CHECKUPS
Page 1: INSTRUCTION MANUAL SLIT LAMP SL-D7
Page 4 and 5: MAINTENANCE AND CHECKS 1. Regularly
Page 6 and 7: SAFETY CAUTIONS CAUTION Icons Preve
Page 8 and 9: MAINTENANCE USER MAINTENANCE To mai
Page 10 and 11: CONTENTS INTRODUCTION .............
Page 12 and 13: CONFIGURATION NAMES OF MAIN BODY CO
Page 14 and 15: Spare chinrest tissue pin (2) Instr
Page 16 and 17: Article name Qty Article name Qty (
Page 18 and 19: SECURING THE UNIT TYPE TABLE TOP 1
Page 20 and 21: SECURING THE BINOCULAR TUBES 1 Alig
Page 22 and 23: CONNECTING AND SECURING OF CABLES 1
Page 24 and 25: 2 Remove the fixing knob of the mic
Page 26 and 27: COUNTER-BALANCE PROCEDURE 1 Turn th
Page 28 and 29: 11 Holding the prism box, look thro
Page 30 and 31: OPERATING THE MICROSCOPE UNIT SL-D7
Page 32 and 33: OPERATING THE ILLUMINATION UNIT CAU
Page 34 and 35: Centering knob INCLINED ILLUMINATIO
Page 36 and 37: AMBER FILTER The amber filter is us
Page 38 and 39: TROUBLESHOOTING TROUBLESHOOTING GUI
Page 40 and 41: SL-D7 Dimensions, Weight Dimensions
Page 42 and 43: SYSTEM CONFIGURATION SL-D7/D8Z Syst
Page 46 and 47: PLACING AN ORDER FOR CONSUMABLES
Page 48 and 49: REPLACING FUSES CAUTION When replac
Page 50 and 51: CLEANING THE SLIDING PLATE, RAIL AN
Page 52 and 53: ELECTRONIC FLASH DEVICE FD-21 FEATU
Page 54 and 55: TV RELAY LENS TL-54/55 (BUILT-IN BE
Page 56 and 57: OBSERVATION TUBE FEATURES • Used
Page 59 and 60: When contacting us, please have the

SL-D7 SL-D8Z

Create successful ePaper yourself

Delete template?

Save as template?