SL-D7 SL-D8Z
SL-D7 SL-D8Z
SL-D7 SL-D8Z
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FITTING THE CHINREST TISSUE<br />
1 Remove the chinrest tissue pins.<br />
2 Take approximately one-fifth of the pad of chinrest tissues and secure this at each end<br />
with the pins.<br />
FITTING THE CAP<br />
1 Fit the cap to the shaft aligning the guide rod with the groove in the cap.<br />
SECURING THE TONOMETER MOUNT SO-TM1 (OPTIONAL ACCESSORY)<br />
Depending on specification, SO-TM1 may be included in standard accessories.<br />
1 Align the locating pin of SO-TM1 into the holes of the microscope, and fasten the screw.<br />
Screw<br />
Locating Pin<br />
The holes<br />
21<br />
ASSEMBLY PROCEDURE