General catalogue 2013 - Orkli
General catalogue 2013 - Orkli
General catalogue 2013 - Orkli
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MANIFOLDS AND DISTRIBUTION EQUIPMENT<br />
did you know….?<br />
using Modular Manifolds<br />
is childsplay?<br />
Advantages<br />
- better service, less stock.<br />
- cleanliness: thanks to their inner<br />
sealing gasket which prevents dirt<br />
from entering.<br />
- greater product reliability.<br />
Preparing the manifold<br />
5<br />
4<br />
3<br />
2<br />
1<br />
1<br />
The installation of the manifold starts by joining the modules<br />
together manually, making the short male connector on one of<br />
the modules coincide with the short female connector on the<br />
other. Once the modules have been joined, you have to turn one<br />
module with-in the other as far as it will go.<br />
2<br />
To finish, make sure that one part no longer<br />
turns with-in the other, pushing the safety<br />
element with the help of a tool.<br />
Carry out these steps with as many modules<br />
as necessary.<br />
3<br />
4<br />
5<br />
Once all the modules have been<br />
installed you need to fit the final<br />
module with the purging device<br />
and the drain valve following the<br />
same process as above.<br />
Then install the initial module.<br />
The ball valve will be the last element to be<br />
connected.<br />
58<br />
Tel.: +34 943 80 94 80 Fax: +34 943 80 52 41 www.orkli.com
Change language