CONSTRUCTOPEDIA

More documents

Recommendations

Info

Building Instructions: 15 Minute Building Projects Step# 3 Place one of the 24 tooth gears on the exposed 10 stud axle at the top of the assembly. Connect the other 24 tooth gear using the axle pin to the 4 th hole from the top of the beam. Connect one of the 40 tooth gears to the 5 stud axle in the middle of the assembly. Connect the other 40 gear using the 3 stud axle to the motor. Center for Engineering Educational Outreach, Tufts University Copyright 2007 LEGOengineering.com & Tufts Center for Engineering Educational Outreach
Building Instructions: 15 Minute Building Projects NXT Merry-Go-Round! Model Description: This medium building difficulty merry-go-round can rotate forever!! Wires will never get tangled up since the NXT spins with the motors. This model uses LEGO rubber bands to help hold one of the motors in place. Center for Engineering Educational Outreach, Tufts University Copyright 2007 LEGOengineering.com & Tufts Center for Engineering Educational Outreach
Page 1 and 2:
CONSTRUCTOPEDIA NXT Kit 9797 Beta V
Page 3 and 4: Building Instructions: Simple Shape
Page 5 and 6: Building Instructions: Simple Shape
Page 7 and 8: Building Instructions: Ways to Atta
Page 37 and 38: Building Instructions: Front End Se
Page 51 and 52: Building Instructions: 15 Minute Bu
Page 53: Building Instructions: 15 Minute Bu
Page 63 and 64: Building Instructions: Full Car Mod
Page 65: Building Instructions: Full Car Mod
show all

CONSTRUCTOPEDIA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?