GME™ 131 / AEQ™ 215 User Manual - Peavey.com

Front Panel
GME 131
1 2
3
4 5 6
AEQ 215
1 2 3 1 2
3
4 5 4 5
6
Panel Frontal
1. OUTPUT LEVEL LED ARRAY Indicates output level from -12 dB to +12 dB.
2. GAIN Regulates overall gain of the equalizer section.
3. EQUALIZER SECTION These controls adjust the amount of cut or boost at their
respective frequencies. The GME 131 is equipped with FLS ® LEDs at the top of each band.
These indicators will illuminate as an indication of feedback at that frequency.
4. LOW CUT Activates a filter that rejects frequencies below 40 Hz. Frequency roll off is
24 dB per octave when the filter is engaged, as indicated by the illumination of the
adjacent LED. This filter will operate even with the bypass switch engaged.
5. BYPASS Allows signal to bypass the unit with the exception of the low-cut filter. With
this switch engaged, signal is routed from input through the filter to output.
6. POWER Applies mains power to the unit when in the ON position. The adjacent LED
will illuminate when power is being applied.
5