Cutting and Grinding Discs - LUKAS-ERZETT

163 163
Cutting and Grinding Discs
Content
Product line marking
Description
Page
• Structure and Components 164
• Technical Information 165
• Safety 166
• Labelling 167
Packing unit:
50 pcs.
Ordering example: AT005636
The product lines are additionally
marked on the table with the product
line heading.
Further information
on page 14 and 15.
• Cutting discs 169
• Grinding discs 193
• Grinding cup wheels 202
• Diamondtools 206

164 Cutting and Grinding Discs
Structure and Components
Date of expiry
(see page 165)
Metal ring
ROTTLUFF disc with label
Strong fibre glass
reinforcement for additional
safety and lateral stability
Active fillers for better
cutting performance
Mixture with high-quality grains
Bonding matrix =
fillers + phenolic resins
Abrasive
Bonded
abrasive
Abrasives
Semi-friable aluminium oxide Zirconia aluminia Vitrified coated roasted
aluminium oxide
3M Cubitron

Cutting and Grinding Discs
165
Technical Information
Durability
Resin bonded grinding and cutting wheels for freehand applications
must be depleted within three years of manufacture.
Please see metal ring for the expiry date which is specified by
month and year; for instance V07/2015.
Labelling system for resin bonded grinding wheels
Example:
A 30/36 V BF
Abrasive Grit size Hardness Bond
Abrasive Type Grit Hardness Grade Bond
coarse medium fine soft medium hard
A - aluminium oxide
12 36 60 M R U
BA – resin bond
C - silicon carbide
Z - zirconia alumina
up to up to up to Q S V
24 54 120 P T X
BF – resin bond,
fibre-reinforced
Operating speeds
LUKAS- grinding wheels and discs of the brand ROTTLUFF
are developed and tested for particular working speeds and
grinding processes.
Prior to the mounted of the grinding tool on the machine, it must
be ensured that the machine’s nominal speed (as specified on
nameplate) does not exceed the maximum operating speed
indicated on the grinding wheel or disc.
Maximum
operating speed
Diameter of Disc [mm] /RPM [min -1 ]
100 115 125 150 180 230 305 355 406
80 m/s
15.300 13.300 12.200 10.200 8.500 6.600 5.100 4.400 3.850
100 m/s
19.100 16.650 15.300 12.700 10.650 8.350 6.400 5.500 4.800

166 Cutting and Grinding Discs
Safety
With regards to occupational safety and operational convenience,
LUKAS responsibility to the customer is taken very seriously. Our
products are designed, manufactured and produced in accordance
with the most stringent quality standards to provide a maximum of
customer value at minimum risk. We are a member of both,
the German Abrasive Association (VDS) and the Organisation for
the Safety of Abrasives (oSa) and thus actively contribute to users’
health and safety.
Applied standards:
• Safety Requirements for Bonded Abrasives Products:
EN12413
• Safety Requirements for Diamond Blades:
EN 13236
Safety recommendations
• Don’t handle wheels roughly.
• Don’t use non-reinforced cut-off wheels on portable machines.
• Don’t store wheels in a damp atmosphere or in extreme
temperatures.
• Don’t mount a damaged wheel.
• Don’t ever exceed the maximum operating speed marked on
the wheel.
• Don’t force a wheel onto a machine spindle.
• Don’t use mounting flanges which are incorrect, damaged,
dirty or burred.
• Don’t tighten the mounting nut or locking flange excessively.
To do so can distort the flanges and discs.
• Don’t use a machine without a wheel guard.
• Don’t use wheels without proper ventilation or dust protection
equipment.
• Don’t apply side pressure to cut-off wheels. You should not
bend the wheel.
• Don’t stop the wheel by applying pressure to the periphery or
face. Always switch the machine off and allow the wheel to
stop revolving.
• Don’t allow the wheel to be trapped or pinched in the cut.
• Don’t apply excessive pressure onto the wheel so that the
driving motor slows down.
• Don’t drop or lower a portable machine by the cable or airline
onto the floor. A wheel can be easily cracked, if it is put down
hard, by the weight of the machine. This is a common cause of
wheel breakage.
• Don’t grind with a depressed centre grinding wheel at an angle
below 30 degrees to the work piece.
• Don’t use a machine in a position where you do not have full
control of the machine and you are not well balanced.
Clamping System
The use of flanges with unequal diameters is not allowed.
Both flanges between which the bonded abrasive is mounted
must have the same outer diameter and similar contact
areas (according to EN60745-2-3:2007 and ANSI B.7.1).
correct
incorrect

Cutting and Grinding Discs
167
Rottluff-Labelling
Manufactured according to EN 12413
BF = resin bond,
fibre-reinforced
46 = Grit size
(16/very coarse,
36/medium, 60/fine)
Safety standard
max. operating speed
max. operating speed
A = Aluminium oxide
C = Silicon carbide
AC = Aluminium oxide /
Silicon carbide
ZA = zirconia alumina /
aluminium oxide
EAN Code
Safety and operation Instructions
Product-Number
Application
Iron, sulphur and
chlorine < 0,1%
100m/s = (green)
max. operating speed
80m/s = (red) max.
operating speed
63m/s = (yellow)
max. operating speed
50m/s = (blue) max.
operating speed
D
a
125 x 1 x 22,23 = D x b x a
5‘‘ x 0.04‘‘ x 7/8‘‘ = D x b x a
Diameter x thickness x bore size
b
Types of resin-bonded grinding wheels
Cutting discs
b = (0,8 mm – 4,5 mm)
(USA: Type 1)
Cutting discs
b = (0,8 mm – 4,5 mm)
(USA: Type 27)
Grinding wheels
b = (4 mm – 10 mm)
(USA: Type 27)
Grinding wheels
b = (6 mm – 8 mm)
(USA: Type 28)
T 41
T 42
T 27
T 28
Straight cutting discs.
• Available in diameters from
50 (2“) to 230 mm (9“) for
freehand applications,
• from 300 mm (12“) to
500 mm (20“) for use in
stationary machines
Depressed centre cutting
discs.
• Available in diameters from
50 (2“) to 230 mm (9“),
allowed for freehand use.
Depressed centre grinding
wheels.
• Available in diameters from
76 (3“) to 230 mm (9“),
allowed for freehand use.
Depressed centre grinding
wheels.
• Available in diameters from
76 (3“) to 230 mm (9“),
allowed for freehand use.

168
Cutting and Grinding Discs
Applications/materials
structural steels
in general
concrete, reinforced
tool steel
roof-tiles,
clay pipes
steel sheets,
thin-walled profiles
tiles, ceramics
stainless steels,
high-alloyed
stainless steels,
low-alloyed
stainless steel,
VA-steel sheet
clinker
refractory bricks
sandstone bricks
stone, general purpose
titanium
marble
rail tracks
cellular concrete
Pumice blocks
austenitic steels
titanium
hard artificial stone
ductile cast iron pipes
grey cast iron, spheroidal
cast iron, cast steel
and malleable cast iron
concrete
aluminium,
non-ferrous metals in
general
exposed aggregate
concrete
asphalt
granite

169 169
Cutting discs
Content
Product line marking
Description
Page
• Qualities and areas of application 170
• Cutting discs for stainless steel 172
• Cutting discs for metal 179
• Cutting discs for non-ferrous metals 187
Packing unit:
50 pcs.
Ordering example: AT005636
The product lines are additionally
marked on the table with the product
line heading.
Further information
on page 14 and 15.
• Cutting discs for cast iron 189
• Cutting discs for stone, concrete and cast iron 190

170 Cutting and Grinding Discs
Cutting discs
best suitable
suitable
Ti
Thin cutting discs
PROMAXcc
BEST LIFE A60X-BF
PROMAXcc
BEST LIFE A46X-BF
PROMAXcc
BEST LIFE A60X-BF INOX
PROMAXcc
BEST LIFE A46X-BF INOX
PROMAXcc
A60N-BF ALU
PROMAXcc
A46N-BF ALU
PREMIUMFLEX
A46T-BF
PREMIUMFLEX
A60S-BF INOX
PREMIUMFLEX
A46T-BF INOX
PREMIUMFLEX
C46R-BF
PREMIUMFLEX
A46S-BF INOX
PREMIUMFLEX
A60S-BF
TERRAFLEX
A60R-BF INOX
TERRAFLEX
AC60Q-BF
Cutting discs
PROMAXcc
BEST LIFE A30X-BF
PROMAXcc
BEST CUT C30X-BF
PROMAXcc
A30U-BF
PROMAXcc
A36U-BF
PROMAXcc
A30U-BF INOX
PROMAXcc
A36U-BF INOX
PROMAXcc
ZA24R-BF
PROMAXcc
A36N-BF ALU
PREMIUMFLEX
A24R-BF
PREMIUMFLEX
A24/30S-BF INOX
PREMIUMFLEX
C30S-BF
PREMIUMFLEX
AC24R-BF
TERRAFLEX
A30P-BF

Cutting and Grinding Discs
171
Cutting discs
best suitable
suitable
Ti
Cutting discs
PREMIUMFLEX
A24R-BF
PREMIUMFLEX
AC24R-BF
PREMIUMFLEX
C24R-BF
Stationary cutting discs
PREMIUMFLEX
A36S-BF INOX
PREMIUMFLEX
A30S-BF INOX
PREMIUMFLEX
A36S-BF
PREMIUMFLEX
A30T-BF
Always the
right tool
Cutting and grinding discs „Premiumflex“:
Please convince yourself of our premium tools
with an excellent price-performance ratio!
www.lukas-erzett.com
Tobias Tröbs
Sales Department

172
Cutting discs
Small cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT501006
Packing unit:
100 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Suitable mounting arbors page 376.
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA46S-BF INOX a50 a1,0 a6,00 a30.500 aAT501006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a50 a1,0 a10,00 a30.500 aAT501010 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46S-BF INOX a50 a2,0 a6,00 a30.500 aAT502006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a50 a2,0 a10,00 a30.500 aAT502010 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a50 a3,0 a6,00 a30.500 aAT503006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a50 a3,0 a10,00 a30.500 aAT503010 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a76 a1,0 a6,00 a20.100 aAT761006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a76 a1,0 a10,00 a20.100 aAT761010 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46S-BF INOX a76 a2,0 a6,00 a20.100 aAT762006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a76 a2,0 a10,00 a20.100 aAT762010 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46S-BF INOX a76 a3,0 a6,00 a20.100 aAT763006 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46S-BF INOX a76 a3,0 a10,00 a20.100 aAT763010 a a a a a a a a a a ▲
Thin cutting discs for stainless steel (ISO 603-16)
High Performance
Ordering example: AT005636
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T42 PROMAX BEST LIFE aA60X-BF INOX a100 a0,8 a16,00 a15.300 aAT005636 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA60X-BF INOX a100 a1,0 a16,00 a15.300 aAT003000 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA60X-BF INOX a115 a0,8 a22,23 a13.300 aAT005301 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA60X-BF INOX a115 a1,0 a22,23 a13.300 aAT005841 a a a a a a a a a a ■
T42 PROMAX BEST LIFE aA60X-BF INOX a125 a0,8 a22,23 a12.200 aAT005302 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA60X-BF INOX a125 a1,0 a22,23 a12.200 aAT005842 a a a a a a a a a a ■

Cutting discs
173
Thin cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT003108
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA60S-BF INOX a100 a1,0 a16,00 a15.300 aAT003108 a a a a a a a a a a ■
T41 PREMIUMFLEX aA60S-BF INOX a115 a1,0 a22,23 a13.300 aAT004643 a a a a a a a a a a ■
T41 PREMIUMFLEX aA60S-BF INOX a125 a1,0 a22,23 a12.200 aAT002672 a a a a a a a a a a ■
Thin cutting discs for stainless steel (ISO 603-16)
Base
Ordering example: AT0041671002
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 TERRAFLEX aA60R-BF INOX a115 a1,0 a22,23 a13.300 aAT0041671002 a a a a a a a a a a ▲
T41 TERRAFLEX aA60R-BF INOX a125 a1,0 a22,23 a12.200 aAT0041691002 a a a a a a a a a a ▲

174 Cutting discs
Thin cutting discs for stainless steel (ISO 603-16)
High Performance
Ordering example: AT003346
Packing unit:
50 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX BEST LIFE aA46X-BF INOX a115 a1,6 a22,23 a13.300 aAT003346 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF INOX a125 a1,6 a22,23 a12.200 aAT003348 a a a a a a a a a a ■
T41 PROMAX BEST LIFE aA46X-BF INOX a150 a1,6 a22,23 a10.200 aAT003327 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF INOX a180 a1,6 a22,23 a8.500 aAT005570 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA46X-BF INOX a180 a1,6 a22,23 a8.500 aAT005571 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF INOX a230 a1,8 a22,23 a6.600 aAT005782 a a a a a a a a a a ■
T42 PROMAX BEST LIFE aA46X-BF INOX a230 a1,8 a22,23 a6.600 aAT005783 a a a a a a a a a a ▲
Thin cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT000630
Packing unit:
50 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA46T-BF INOX a100 a1,6 a16,00 a15.300 aAT000630 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46T-BF INOX a115 a1,6 a22,23 a13.300 aAT000647 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF INOX a125 a1,6 a22,23 a12.200 aAT000674 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46T-BF INOX a150 a1,6 a22,23 a10.200 aAT000700 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF INOX a180 a1,6 a22,23 a8.500 aAT000716 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF INOX a230 a1,8 a22,23 a6.600 aAT000742 a a a a a a a a a a ■
T42 PREMIUMFLEX aA46T-BF INOX a230 a1,8 a22,23 a6.600 aAT000744 a a a a a a a a a a ■

Cutting discs
175
Cutting discs for stainless steel (ISO 603-16)
High Performance
Ordering example: AT001635
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA36U-BF INOX a100 a2,0 a16,00 a15.300 aAT001635 a a a a a a a a a a ▲
T41 PROMAX aA36U-BF INOX a115 a2,0 a22,23 a13.300 aAT001657 a a a a a a a a a a ▲
T41 PROMAX aA36U-BF INOX a125 a2,0 a22,23 a12.200 aAT001687 a a a a a a a a a a ■
T41 PROMAX aA36U-BF INOX a150 a2,0 a22,23 a10.200 aAT001716 a a a a a a a a a a ▲
T41 PROMAX aA36U-BF INOX a180 a2,0 a22,23 a8.500 aAT001743 a a a a a a a a a a ■
T41 PROMAX aA36U-BF INOX a230 a2,0 a22,23 a6.600 aAT001782 a a a a a a a a a a ■
Cutting discs for stainless steel (ISO 603-16)
High Performance
Ordering example: AT001641
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T42 PROMAX aA30U-BF INOX a100 a2,5 a16,00 a15.300 aAT001641 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF INOX a115 a2,5 a22,23 a13.300 aAT001661 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a115 a2,5 a22,23 a13.300 aAT001666 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF INOX a125 a2,5 a22,23 a12.200 aAT001691 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a125 a2,5 a22,23 a12.200 aAT001696 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF INOX a150 a2,5 a22,23 a10.200 aAT001721 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a150 a2,5 a22,23 a10.200 aAT001725 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF INOX a180 a2,5 a22,23 a8.500 aAT001747 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a180 a2,5 a22,23 a8.500 aAT001751 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF INOX a180 a3,0 a22,23 a8.500 aAT002758 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a180 a3,0 a22,23 a8.500 aAT001758 a a a a a a a a a a ▲

176
Cutting discs
Cutting discs for stainless steel (ISO 603-16)
High Performance
Ordering example: AT001786
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
fIron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA30U-BF INOX a230 a2,5 a22,23 a6.600 aAT001786 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a230 a2,5 a22,23 a6.600 aAT001791 a a a a a a a a a a ▲
T41 RROMAX aA30U-BF INOX a230 a3,0 a22,23 a6.600 aAT002796 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF INOX a230 a3,0 a22,23 a6.600 aAT001796 a a a a a a a a a a ▲
Cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT003453
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA24/30S-BF INOX a115 a2,5 a22,23 a13.300 aAT003453 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a115 a2,5 a22,23 a13.300 aAT001442 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a115 a3,0 a22,23 a13.300 aAT000153 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a115 a3,0 a22,23 a13.300 aAT003180 a a a a a a a a a a ■
T41 PREMIUMFLEX aA24/30S-BF INOX a125 a2,5 a22,23 a12.200 aAT004154 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a125 a2,5 a22,23 a12.200 aAT004157 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a125 a3,0 a22,23 a12.200 aAT000154 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a125 a3,0 a22,23 a12.200 aAT010154 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a150 a2,5 a22,23 a10.200 aAT003162 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a150 a2,5 a22,23 a10.200 aAT004172 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a150 a3,0 a22,23 a10.200 aAT000162 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a150 a3,0 a22,23 a10.200 aAT004174 a a a a a a a a a a ▲

Cutting discs
177
Cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT003723
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA24/30S-BF INOX a180 a2,5 a22,23 a8.500 aAT003723 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a180 a2,5 a22,23 a8.500 aAT005450 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a180 a3,0 a22,23 a8.500 aAT000163 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a180 a3,0 a22,23 a8.500 aAT003163 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a230 a2,5 a22,23 a6.600 aAT003568 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a230 a2,5 a22,23 a6.600 aAT005451 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24/30S-BF INOX a230 a3,0 a22,23 a6.600 aAT004176 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24/30S-BF INOX a230 a3,0 a22,23 a6.600 aAT004168 a a a a a a a a a a ■

178
Cutting discs
Stationary cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT020201
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%)
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA36S-BF INOX a300 a2,6 a25,4 a5.100 aAT020201 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA36S-BF INOX a350 a2,6 a25,4 a4.400 aAT020208 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA36S-BF INOX a400 a3,2 a25,4 a3.800 aAT020213 a a a a a a a a a a ▲
Stationary cutting discs for stainless steel (ISO 603-16)
Industry
Ordering example: AT010002
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA30S-BF INOX a300 a3,5 a25,40 a6.400 aAT010002 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a300 a3,5 a32,00 a6.400 aAT010003 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a300 a3,5 a40,00 a6.400 aAT010004 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a350 a3,5 a25,40 a5.400 aAT010010 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a350 a3,5 a32,00 a5.400 aAT010011 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a350 a3,5 a40,00 a5.400 aAT010012 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a400 a4,0 a25,40 a4.700 aAT010014 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a400 a4,0 a32,00 a4.700 aAT010015 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30S-BF INOX a400 a4,0 a40,00 a4.700 aAT010016 a a a a a a a a a a ▲

Cutting discs
179
Thin cutting discs for metal (ISO 603-16)
High Performance
Ordering example: AT005740
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX BEST LIFE aA60X-BF a100 a1,0 a16,00 a15.300 aAT005740 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA60X-BF a115 a1,0 a22,23 a13.300 aAT005840 a a a a a a a a a a ■
T41 PROMAX BEST LIFE aA60X-BF a125 a1,0 a22,23 a12.200 aAT005835 a a a a a a a a a a ■
Thin cutting discs for metal (ISO 603-16)
Industry
Ordering example: AT006440
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA60S-BF a115 a1,0 a22,23 a13.300 aAT006440 a a a a a a a a a a ■
T41 PREMIUMFLEX aA60S-BF a125 a1,0 a22,23 a12.200 aAT006710 a a a a a a a a a a ■

180 Cutting discs
Thin cutting discs for metal (ISO 603-16)
High Performance
Ordering example: AT013301
Packing unit:
25 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX BEST LIFE aA46X-BF a115 a1,6 a22,23 a13.300 aAT013301 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF a125 a1,6 a22,23 a12.200 aAT013302 a a a a a a a a a a ■
T41 PROMAX BEST LIFE aA46X-BF a150 a1,6 a22,23 a10.200 aAT013303 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF a180 a1,6 a22,23 a8.500 aAT013305 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA46X-BF a230 a1,8 a22,23 a6.600 aAT013307 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA46X-BF a230 a1,8 a22,23 a6.600 aAT013308 a a a a a a a a a a ▲
Thin cutting discs for metal (ISO 603-16)
Industry
Ordering example: AT000648
Packing unit:
50 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA46T-BF a115 a1,6 a22,23 a13.300 aAT000648 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF a125 a1,6 a22,23 a12.200 aAT000675 a a a a a a a a a a ■
T41 PREMIUMFLEX aA46T-BF a150 a1,6 a22,23 a10.200 aAT000701 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF a180 a1,6 a22,23 a8.500 aAT000717 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA46T-BF a230 a1,8 a22,23 a6.600 aAT000743 a a a a a a a a a a ■
T42 PREMIUMFLEX aA46T-BF a230 a1,8 a22,23 a6.600 aAT000745 a a a a a a a a a a ■

Cutting discs
181
Cutting discs for metal (ISO 603-16)
High Performance
Ordering example: AT012047
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX BEST LIFE aA30X-BF a115 a2,5 a22,23 a13.300 aAT012047 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA30X-BF a115 a2,5 a22,23 a13.300 aAT011085 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA30X-BF a125 a2,5 a22,23 a12.200 aAT011086 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA30X-BF a125 a2,5 a22,23 a12.200 aAT011087 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA30X-BF a150 a2,5 a22,23 a10.200 aAT012045 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA30X-BF a150 a2,5 a22,23 a10.200 aAT012048 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA30X-BF a180 a2,5 a22,23 a8.500 aAT012049 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA30X-BF a180 a2,5 a22,23 a8.500 aAT012046 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aA30X-BF a230 a2,5 a22,23 a6.600 aAT012050 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aA30X-BF a230 a2,5 a22,23 a6.600 aAT012044 a a a a a a a a a a ▲
Cutting discs for metal (ISO 603-16)
High Performance
Ordering example: AT000556
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA36U-BF a100 a2,0 a16,00 a15.300 aAT000556 a a a a a a a a a a ▲
T41 PROMAX aA36U-BF a115 a2,0 a22,23 a13.300 aAT001656 a a a a a a a a a a ■
T41 PROMAX aA36U-BF a125 a2,0 a22,23 a12.200 aAT001686 a a a a a a a a a a ■
T41 PROMAX aA36U-BF a150 a2,0 a22,23 a10.200 aAT001717 a a a a a a a a a a ▲
T41 PROMAX aA36U-BF a180 a2,0 a22,23 a8.500 aAT001742 a a a a a a a a a a ■
T41 PROMAX aA36U-BF a230 a2,0 a22,23 a6.600 aAT001781 a a a a a a a a a a ■

182
Cutting discs
Cutting discs for metal (ISO 603-16)
High Performance
Ordering example: AT001642
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T42 PROMAX aA30U-BF a100 a2,5 a16,00 a15.300 aAT001642 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF a115 a2,5 a22,23 a13.300 aAT001660 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a115 a2,5 a22,23 a13.300 aAT001665 a a a a a a a a a a ■
T41 PROMAX aA30U-BF a125 a2,5 a22,23 a12.200 aAT001690 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a125 a2,5 a22,23 a12.200 aAT001695 a a a a a a a a a a ■
T41 PROMAX aA30U-BF a150 a2,5 a22,23 a10.200 aAT001720 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a150 a2,5 a22,23 a10.200 aAT001724 a a a a a a a a a a ■
T42 PROMAX aA30U-BF a150 a3,0 a22,23 a10.200 aAT002056 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF a180 a2,5 a22,23 a8.500 aAT001746 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a180 a2,5 a22,23 a8.500 aAT001750 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF a180 a3,0 a22,23 a8.500 aAT001759 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a180 a3,0 a22,23 a8.500 aAT001762 a a a a a a a a a a ▲
T41 PROMAX aA30U-BF a230 a2,5 a22,23 a6.600 aAT001785 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a230 a2,5 a22,23 a6.600 aAT001790 a a a a a a a a a a ■
T41 PROMAX aA30U-BF a230 a3,2 a22,23 a6.600 aAT001799 a a a a a a a a a a ▲
T42 PROMAX aA30U-BF a230 a3,2 a22,23 a6.600 aAT001802 a a a a a a a a a a ▲

Cutting discs
183
Cutting discs for metal (ISO 603-16)
Industry
Ordering example: AT000636
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA24R-BF a100 a3,0 a16,00 a15.300 aAT000636 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a100 a3,0 a16,00 a15.300 aAT000638 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a115 a2,5 a22,23 a13.300 aAT000656 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a115 a2,5 a22,23 a13.300 aAT000657 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a115 a3,0 a22,23 a13.300 aAT000660 a a a a a a a a a a ■
T42 PREMIUMFLEX aA24R-BF a115 a3,0 a22,23 a13.300 aAT000662 a a a a a a a a a a ■
T41 PREMIUMFLEX aA24R-BF a125 a2,5 a22,23 a12.200 aAT000679 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a125 a2,5 a22,23 a12.200 aAT000683 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a125 a3,0 a22,23 a12.200 aAT000686 a a a a a a a a a a ■
T42 PREMIUMFLEX aA24R-BF a125 a3,0 a22,23 a12.200 aAT000688 a a a a a a a a a a ■
T41 PREMIUMFLEX aA24R-BF a150 a3,0 a22,23 a10.200 aAT000707 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a150 a3,0 a22,23 a10.200 aAT000709 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a180 a2,5 a22,23 a8.500 aAT000722 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a180 a2,5 a22,23 a8.500 aAT000725 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a180 a3,0 a22,23 a8.500 aAT000728 a a a a a a a a a a ■
T42 PREMIUMFLEX aA24R-BF a180 a3,0 a22,23 a8.500 aAT000732 a a a a a a a a a a ■
T41 PREMIUMFLEX aA24R-BF a230 a2,5 a22,23 a6.600 aAT000861 a a a a a a a a a a ▲
T42 PREMIUMFLEX aA24R-BF a230 a2,5 a22,23 a6.600 aAT004063 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a230 a3,0 a22,23 a6.600 aAT000750 a a a a a a a a a a ■
T42 PREMIUMFLEX aA24R-BF a230 a3,0 a22,23 a6.600 aAT000754 a a a a a a a a a a ■
T42 PREMIUMFLEX aA24R-BF a230 a3,4 a22,23 a6.600 aAT002033 a a a a a a a a a a ▲

184 Cutting discs
Cutting discs for metal (ISO 603-16)
Base
Ordering example: AT0102401002
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 TERRAFLEX aA30P-BF a115 a2,5 a22,23 a13.300 aAT0102401002 a a a a a a a a a a ▲
T41 TERRAFLEX aA30P-BF a125 a2,5 a22,23 a12.200 aAT0102411002 a a a a a a a a a a ▲
T41 TERRAFLEX aA30P-BF a180 a2,5 a22,23 a8.500 aAT0102421002 a a a a a a a a a a ▲
T41 TERRAFLEX aA30P-BF a230 a2,5 a22,23 a6.600 aAT0102431002 a a a a a a a a a a ▲

Cutting discs
185
Cutting discs for metal (ISO 603-16)
Industry
Ordering example: AT010052
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
v max. : 100 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA24R-BF a300 a4,0 a20,00 a6.400 aAT010052 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a300 a4,0 a22,23 a6.400 aAT010053 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a300 a4,0 a25,40 a6.400 aAT010054 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a350 a4,0 a20,00 a5.400 aAT010055 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a350 a4,0 a22,23 a5.400 aAT010056 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a350 a4,0 a25,40 a5.400 aAT010057 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a400 a4,0 a20,00 a4.700 aAT004711 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a400 a4,0 a22,23 a4.700 aAT002844 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA24R-BF a400 a4,0 a25,40 a4.700 aAT004712 a a a a a a a a a a ▲
Stationary Cutting discs for metal (ISO 603-16)
Industry
Ordering example: T010028
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA36S-BF a300 a2,6 a25,40 a5.100 aAT010028 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA36S-BF a350 a2,6 a25,40 a4.400 aAT010029 a a a a a a a a a a ■
T41 PREMIUMFLEX aA36S-BF a400 a3,2 a25,40 a3.800 aAT010030 a a a a a a a a a a ▲

186
Cutting discs
Stationary Cutting discs for metal (ISO 603-16)
Industry
Ordering example: AT001774
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
v max. : 100 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aA30T-BF a300 a3,5 a22,23 a6.400 aAT001774 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a300 a3,5 a25,40 a6.400 aAT001776 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a300 a3,5 a32,00 a6.400 aAT010020 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a300 a3,5 a40,00 a6.400 aAT010021 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a350 a3,5 a25,40 a5.400 aAT010022 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a350 a3,5 a32,00 a5.400 aAT010023 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a350 a3,5 a40,00 a5.400 aAT010024 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a400 a4,0 a25,40 a4.700 aAT010025 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a400 a4,0 a32,00 a4.700 aAT010026 a a a a a a a a a a ▲
T41 PREMIUMFLEX aA30T-BF a400 a4,0 a40,00 a4.700 aAT010027 a a a a a a a a a a ▲

Cutting discs
187
Thin cutting discs for non-ferrous metals (ISO 603-16)
High Performance
Ordering example: AT000920
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
non-ferrous
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA60N-BF ALU a115 a1,0 a22,23 a13.300 aAT000920 a a a a a a a a a a ▲
T41 PROMAX aA60N-BF ALU a125 a1,0 a22,23 a12.200 aAT000950 a a a a a a a a a a ▲
Thin cutting discs for non-ferrous metals (ISO 603-16)
High Performance
Ordering example: AT004776
Packing unit:
50 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
non-ferrous
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA46N-BF ALU a115 a1,6 a22,23 a13.300 aAT004776 a a a a a a a a a a ▲
T41 PROMAX aA46N-BF ALU a125 a1,6 a22,23 a12.200 aAT004788 a a a a a a a a a a ■
T41 PROMAX aA46N-BF ALU a150 a1,6 a22,23 a10.200 aAT001000 a a a a a a a a a a ▲
T41 PROMAX aA46N-BF ALU a180 a1,6 a22,23 a8.500 aAT000985 a a a a a a a a a a ▲
T41 PROMAX aA46N-BF ALU a230 a1,8 a22,23 a6.600 aAT002613 a a a a a a a a a a ▲

188
Cutting discs
Cutting discs for non-ferrous metals (ISO 603-16)
High Performance
Ordering example: AT001664
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
non-ferrous
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX aA36N-BF ALU a115 a2,5 a22,23 a13.300 aAT001664 a a a a a a a a a a ▲
T41 PROMAX aA36N-BF ALU a125 a2,5 a22,23 a12.200 aAT001694 a a a a a a a a a a ▲
T41 PROMAX aA36N-BF ALU a150 a2,5 a22,23 a10.200 aAT001723 a a a a a a a a a a ▲
T41 PROMAX aA36N-BF ALU a180 a2,5 a22,23 a8.500 aAT001755 a a a a a a a a a a ▲
T41 PROMAX aA36N-BF ALU a230 a2,5 a22,23 a6.600 aAT001789 a a a a a a a a a a ▲

Cutting discs
189
Cutting discs for cast iron (ISO 603-16)
Industry
Ordering example: AT011006
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aAC24R-BF a180 a3,0 a22,23 a8.500 aAT011006 a a a a a a a a a a ▲
T42 PREMIUMFLEX aAC24R-BF a180 a3,0 a22,23 a8.500 aAT011007 a a a a a a a a a a ▲
T41 PREMIUMFLEX aAC24R-BF a230 a2,5 a22,23 a6.600 aAT000327 a a a a a a a a a a ▲
T41 PREMIUMFLEX aAC24R-BF a230 a3,0 a22,23 a6.600 aAT011008 a a a a a a a a a a ▲
T42 PREMIUMFLEX aAC24R-BF a230 a3,0 a22,23 a6.600 aAT011009 a a a a a a a a a a ▲
Thin cutting discs for cast iron (ISO 603-16)
Base
Ordering example: AT0102501002
Packing unit:
50 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 TERRAFLEX aAC60Q-BF a115 a1,0 a22,23 a13.300 aAT0102501002 a a a a a a a a a a ▲
T41 TERRAFLEX aAC60Q-BF a125 a1,0 a22,23 a12.200 aAT0102511002 a a a a a a a a a a ▲

190
Cutting discs
Cutting discs for stone, concrete and cast iron (ISO 603-14)
High Performance
Ordering example: AT002948
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PROMAX BEST LIFE aC30X-BF a115 a2,5 a22,23 a13.300 aAT002948 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aC30X-BF a115 a3,0 a22,23 a13.300 aAT003013 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aC30X-BF a125 a2,5 a22,23 a12.200 aAT002949 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aC30X-BF a125 a3,0 a22,23 a12.200 aAT003014 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aC30X-BF a150 a2,5 a22,23 a10.200 aAT002957 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aC30X-BF a150 a3,0 a22,23 a10.200 aAT003015 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aC30X-BF a180 a2,5 a22,23 a8.500 aAT002958 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aC30X-BF a180 a3,0 a22,23 a8.500 aAT003016 a a a a a a a a a a ▲
T41 PROMAX BEST LIFE aC30X-BF a230 a2,5 a22,23 a6.600 aAT002959 a a a a a a a a a a ▲
T42 PROMAX BEST LIFE aC30X-BF a230 a3,0 a22,23 a6.600 aAT003017 a a a a a a a a a a ▲
Thin cutting discs for stone, concrete and cast iron (ISO 603-14)
Industry
Ordering example: AT002317
Packing unit:
50 pcs.
up to Ø 150 = 25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aC46R-BF a115 a1,6 a22,23 a13.300 aAT002317 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC46R-BF a125 a1,6 a22,23 a12.200 aAT002377 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC46R-BF a180 a1,6 a22,23 a8.500 aAT002381 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC46R-BF a230 a1,6 a22,23 a6.600 aAT001372 a a a a a a a a a a ▲

Cutting discs
191
Cutting discs for stone, concrete and cast iron (ISO 603-14)
Industry
Ordering example: AT000637
Packing unit:
25 pcs.
T41 = flat
T42 = depressed centre
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aC30S-BF a100 a3,0 a16,00 a15.300 aAT000637 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a100 a3,0 a16,00 a15.300 aAT000639 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC30S-BF a115 a3,0 a22,23 a13.300 aAT000661 a a a a a a a a a a ■
T42 PREMIUMFLEX aC30S-BF a115 a3,0 a22,23 a13.300 aAT000664 a a a a a a a a a a ■
T41 PREMIUMFLEX aC30S-BF a125 a3,0 a22,23 a12.200 aAT000687 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a125 a3,0 a22,23 a12.200 aAT000689 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC30S-BF a150 a3,0 a22,23 a10.200 aAT000708 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a150 a3,0 a22,23 a10.200 aAT000710 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC30S-BF a180 a3,0 a22,23 a8.500 aAT000730 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a180 a3,0 a22,23 a8.500 aAT000734 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC30S-BF a230 a3,0 a22,23 a6.600 aAT000752 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a230 a3,0 a22,23 a6.600 aAT000756 a a a a a a a a a a ▲
T42 PREMIUMFLEX aC30S-BF a230 a3,4 a22,23 a6.600 aAT001034 a a a a a a a a a a ▲

192
Cutting discs
Cutting discs for stone, concrete and cast iron (ISO 603-14)
Industry
Ordering example: AT000788
Packing unit:
Ø 300 mm = 25 pcs.
up to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
v max. : 100 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aAC24R-BF a300 a4,0 a20,00 a6.400 aAT000788 a a a a a a a a a a ▲
T41 PREMIUMFLEX aAC24R-BF a300 a4,0 a22,23 a6.400 aAT000793 a a a a a a a a a a ▲
T41 PREMIUMFLEX aAC24R-BF a350 a4,0 a20,00 a5.400 aAT000816 a a a a a a a a a a ■
T41 PREMIUMFLEX aAC24R-BF a350 a4,0 a25,40 a5.400 aAT000826 a a a a a a a a a a ▲
Cutting discs for stone, concrete and cast iron (ISO 603-14)
Industry
Ordering example: AT010058
Packing unit:
Ø 300 mm = 25 pcs.
uo to Ø 400 mm = 10 pcs.
T41 = flat
T42 = depressed centre
v max. : 100 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T41 PREMIUMFLEX aC24R-BF a300 a4,0 a20,00 a6.400 aAT010058 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC24R-BF a300 a4,0 a22,23 a6.400 aAT010059 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC24R-BF a300 a4,0 a25,40 a6.400 aAT010060 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC24R-BF a350 a4,0 a20,00 a5.400 aAT010061 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC24R-BF a350 a4,0 a22,23 a5.400 aAT010062 a a a a a a a a a a ▲
T41 PREMIUMFLEX aC24R-BF a350 a4,0 a25,40 a5.400 aAT010063 a a a a a a a a a a ▲

193 193
Grinding discs
Content
Product line marking
Description
Page
• Qualities and areas of application 194
• Grinding discs for stainless steel 195
• Grinding discs for metal 197
• Grinding discs for non-ferrous metals 200
Packing unit:
25 pcs.
Ordering example: AS005673
The product lines are additionally
marked on the table with the product
line heading.
Further information
on page 14 and 15.
• Grinding discs for stone and cast iron 200

194 Grinding discs
Grinding discs
best suitable
suitable
PROMAXcc
A24T-BF
PROMAXcc COOL
JOBBER A36V-BF INOX
PROMAXcc
A36N-BF ALU
PROMAXcc
A24V-BF INOX
PROMAXcc
BEST LIFE A24X-BF INOX
PROMAXcc
BEST LIFEA24X-BF
PREMIUMFLEX
A24/30S-BF
PREMIUMFLEX
A24/30S-BF INOX
PREMIUMFLEX
C24N-BF
PREMIUMFLEX
AC24S-BF
TERRAFLEX
A24Q BF

Grinding discs
195
Grinding discs for stainless steel (ISO 603-14)
High Performance
Ordering example: AS005673
Packing unit:
25 pcs.
T27 = depressed centre
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX COOL JOBBER aA36V-BF INOX a100 a3,0 a16,00 a15.300 aAS005673 a a a a a a a a a a ▲
T27 PROMAX COOL JOBBER aA36V-BF INOX a115 a3,0 a22,23 a13.300 aAS005675 a a a a a a a a a a ■
T27 PROMAX COOL JOBBER aA36V-BF INOX a125 a3,0 a22,23 a12.200 aAS005676 a a a a a a a a a a ■
T27 PROMAX COOL JOBBER aA36V-BF INOX a150 a3,0 a22,23 a10.200 aAS005677 a a a a a a a a a a ▲
T27 PROMAX COOL JOBBER aA36V-BF INOX a180 a3,0 a22,23 a8.500 aAS005678 a a a a a a a a a a ▲
Grinding discs for stainless steel (ISO 603-14)
High Performance
Ordering example: AS001321
Packing unit:
20 pcs.
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX aA24V-BF INOX a100 a4,0 a16,00 a15.300 aAS001321 a a a a a a a a a a ■
T27 PROMAX aA24V-BF INOX a115 a4,0 a22,23 a13.300 aAS001674 a a a a a a a a a a ■
T27 PROMAX aA24V-BF INOX a125 a4,0 a22,23 a12.200 aAS001705 a a a a a a a a a a ■
T27 PROMAX aA24V-BF INOX a150 a4,0 a22,23 a10.200 aAS001521 a a a a a a a a a a ▲
T27 PROMAX aA24V-BF INOX a180 a4,0 a22,23 a8.500 aAS001766 a a a a a a a a a a ■
T27 PROMAX aA24V-BF INOX a230 a4,0 a22,23 a6.600 aAS001805 a a a a a a a a a a ▲

196 Grinding discs
Grinding discs for stainless steel (ISO 603-14)
High Performance
Ordering example: AS001109
Packing unit:
10 pcs.
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBor an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX BEST LIFE aA24X-BF INOX a100 a7,0 a16,00 a15.300 aAS001109 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF INOX a115 a7,0 a22,23 a13.300 aAS003100 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF INOX a125 a7,0 a22,23 a12.200 aAS003101 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF INOX a150 a7,0 a22,23 a10.200 aAS003102 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF INOX a180 a7,0 a22,23 a8.500 aAS003103 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF INOX a230 a7,0 a22,23 a6.600 aAS003104 a a a a a a a a a a ▲
Grinding discs for stainless steel (ISO 603-14)
Industry
Ordering example: AS002037
Packing unit:
Thickness up to 4 mm = 20 pcs.
from 6 mm = 10 pcs.
Iron, sulphur and chlorine < 0,1%
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PREMIUMFLEX aA24/30S-BF INOX a100 a6,0 a16,00 a15.300 aAS002037 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a115 a4,0 a22,23 a13.300 aAS003105 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF INOX a115 a6,4 a22,23 a13.300 aAS000105 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a125 a4,0 a22,23 a12.200 aAS003106 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a125 a6,4 a22,23 a12.200 aAS000106 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a150 a6,4 a22,23 a10.200 aAS000107 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF INOX a180 a6,4 a22,23 a8.500 aAS000108 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a180 a8,0 a22,23 a8.500 aAS002108 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a230 a6,4 a22,23 a6.600 aAS000109 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF INOX a230 a8,0 a22,23 a6.600 aAS003109 a a a a a a a a a a ▲

Grinding discs
197
Grinding discs for metal (ISO 603-14)
High Performance
Ordering example: AS001649
Packing unit:
20 pcs.
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX aA24T-BF a100 a4,0 a16,00 a15.300 aAS001649 a a a a a a a a a a ▲
T27 PROMAX aA24T-BF a115 a4,0 a22,23 a13.300 aAS001675 a a a a a a a a a a ▲
T27 PROMAX aA24T-BF a125 a4,0 a22,23 a12.200 aAS001706 a a a a a a a a a a ▲
T27 PROMAX aA24T-BF a150 a4,0 a22,23 a10.200 aAS001732 a a a a a a a a a a ▲
T27 PROMAX aA24T-BF a180 a4,0 a22,23 a8.500 aAS001767 a a a a a a a a a a ▲
T27 PROMAX aA24T-BF a230 a4,0 a22,23 a6.600 aAS001806 a a a a a a a a a a ▲
Grinding discs for metal (ISO 603-14)
High Performance
Ordering example: AS002450
Packing unit:
10 pcs.
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX BEST LIFE aA24X-BF a100 a7,0 a16,00 a15.300 aAS002450 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a115 a7,0 a22,23 a13.300 aAS002451 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a115 a8,0 a22,23 a13.300 aAS002452 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a125 a7,0 a22,23 a12.200 aAS002453 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a125 a8,0 a22,23 a12.200 aAS002454 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a150 a7,0 a22,23 a10.200 aAS002458 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a150 a8,0 a22,23 a10.200 aAS002459 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a180 a7,0 a22,23 a8.500 aAS002466 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a180 a8,0 a22,23 a8.500 aAS002467 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a230 a7,0 a22,23 a6.600 aAS002468 a a a a a a a a a a ▲
T27 PROMAX BEST LIFE aA24X-BF a230 a8,0 a22,23 a6.600 aAS002469 a a a a a a a a a a ▲

198 Grinding discs
Grinding discs for metal (ISO 603-14)
Industry
Ordering example: AS000642
Packing unit:
Thickness up to 4 mm = 20 pcs.
from 6 mm = 10 pcs.
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PREMIUMFLEX aA24/30S-BF a100 a6,0 a16,00 a15.300 aAS000642 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a115 a4,0 a22,23 a13.300 aAS000665 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a115 a6,0 a22,23 a13.300 aAS000667 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a115 a8,0 a22,23 a13.300 aAS000669 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a125 a4,0 a22,23 a12.200 aAS000690 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a125 a6,0 a22,23 a12.200 aAS000692 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a125 a8,0 a22,23 a12.200 aAS000696 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a150 a4,0 a22,23 a10.200 aAS002920 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a150 a6,0 a22,23 a10.200 aAS000712 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a150 a8,0 a22,23 a10.200 aAS000713 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a180 a4,0 a22,23 a8.500 aAS000514 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a180 a6,5 a22,23 a8.500 aAS000737 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a180 a8,0 a22,23 a8.500 aAS000740 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a230 a4,0 a22,23 a6.600 aAS000515 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a230 a6,5 a22,23 a6.600 aAS000762 a a a a a a a a a a ■
T27 PREMIUMFLEX aA24/30S-BF a230 a8,0 a22,23 a6.600 aAS000767 a a a a a a a a a a ▲
T27 PREMIUMFLEX aA24/30S-BF a230 a10,0 a22,23 a6.600 aAS000932 a a a a a a a a a a ▲

Grinding discs
199
Grinding discs for metal (ISO 603-14)
Base
Ordering example: AS0017301002
Packing unit:
10 pcs.
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 TERRAFLEX aA24Q-BF a115 a6,0 a22,23 a13.300 aAS0017301002 a a a a a a a a a a ▲
T27 TERRAFLEX aA24Q-BF a125 a6,0 a22,23 a12.200 aAS0017311002 a a a a a a a a a a ▲
T27 TERRAFLEX aA24Q-BF a180 a6,0 a22,23 a8.500 aAS0017421002 a a a a a a a a a a ▲
T27 TERRAFLEX aA24Q-BF a230 a6,0 a22,23 a6.600 aAS0017431002 a a a a a a a a a a ▲

200
Grinding discs
Grinding discs for non-ferrous metals (ISO 603-14)
High Performance
Ordering example: AS001677
Packing unit:
10 pcs.
non-ferrous
v max. : 80 m/s
Bezeichnung aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PROMAX aA36N-BF ALU a115 a7,0 a22,23 a13.300 aAS001677 a a a a a a a a a a ▲
T27 PROMAX aA36N-BF ALU a125 a7,0 a22,23 a12.200 aAS001708 a a a a a a a a a a ▲
T27 PROMAX aA36N-BF ALU a150 a7,0 a22,23 a10.200 aAS001734 a a a a a a a a a a ▲
T27 PROMAX aA36N-BF ALU a180 a7,0 a22,23 a8.500 aAS001770 a a a a a a a a a a ▲
T27 PROMAX aA36N-BF ALU a230 a7,0 a22,23 a6.600 aAS001809 a a a a a a a a a a ▲
Grinding discs for stone and cast iron (ISO 603-14)
Industry
Ordering example: AS001597
Packing unit:
10 pcs.
v max. : 80 m/s
Bezeichnung aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PREMIUMFLEX aAC24S-BF a180 a6,8 a22,23 a8.500 aAS001597 a a a a a a a a a a ▲
T27 PREMIUMFLEX aAC24S-BF a180 a8,0 a22,23 a8.500 aAS001598 a a a a a a a a a a ▲
T27 PREMIUMFLEX aAC24S-BF a230 a6,8 a22,23 a6.600 aAS001599 a a a a a a a a a a ▲
T27 PREMIUMFLEX aAC24S-BF a230 a8,0 a22,23 a6.600 aAS001600 a a a a a a a a a a ■

Grinding discs
201
Grinding discs for stone and cast iron (ISO 603-14)
Industry
Ordering example: AS001617
Packing unit:
10 pcs.
v max. : 80 m/s
Description aQuality aØ aThickness aBore an max. aProduct-Number arecommended for a
a amm amm amm a(1/min) a a a
a a a a a a a a
T27 PREMIUMFLEX aC24N-BF a115 a6,0 a22,23 a13.300 aAS001617 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a125 a6,0 a22,23 a12.200 aAS001618 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a150 a6,0 a22,23 a10.200 aAS001622 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a180 a6,8 a22,23 a8.500 aAS001623 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a180 a8,0 a22,23 a8.500 aAS001624 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a230 a6,8 a22,23 a6.600 aAS001625 a a a a a a a a a a ▲
T27 PREMIUMFLEX aC24N-BF a230 a8,0 a22,23 a6.600 aAS001688 a a a a a a a a a a ▲

202
Cup Wheels
Cup wheels for angle grinders, shape SE 6 (to ISO 603-7)
Industry
Ordering example: A204108027027
Packing unit:
5 pcs.
max. operating speed
50 m/s = 11.900 1 /min
Designation aQuality aD aT aH aW aE aProduct-Number arecommended for a
a amm amm amm amm amm a a a
a a a a a a a a a
SE6 08027.22 aA 24 P BA a80 a27 a22,2 a8 a8 aA204108027027 a a a a a a a a a a ■
SE6 08027.22 aA 36 P BA a80 a27 a22,2 a8 a8 aA2041080270270001 a a a a a a a a a a ■
SE6 08027.22 aC 30 N BA a80 a27 a22,2 a8 a8 aA204108027039 a a a a a a a a a a ■

Cup Wheels
203
Cup wheels for angle grinders, shape SE11 with steel cover and bore
Industry
Ordering example: A204108027027
T
Packing unit:
10 pcs.
v max. : 50 m/s
H
D
J
Designation aQuality aD aJ aT aH an max. aProduct-Number arecommended for a
a amm amm amm amm a(1/min) a a a
a a a a a a a a a
SE11 110055.22 aA 16 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555111 a a a a a a a a a a ■
SE11 110055.22 aA 24 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555211 a a a a a a a a a a ■
SE11 110055.22 aA 36 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555311 a a a a a a a a a a ■
SE11 110055.22 aA 60 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555511 a a a a a a a a a a ■
SE11 110055.22 aA 80 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555611 a a a a a a a a a a ▲
SE11 110055.22 aA 120 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555711 a a a a a a a a a a ▲
SE11 110055.22 aC 16 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555121 a a a a a a a a a a ■
SE11 110055.22 aC 24 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555221 a a a a a a a a a a ■
SE11 110055.22 aC 36 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555321 a a a a a a a a a a ■
SE11 110055.22 aC 60 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555521 a a a a a a a a a a ■
SE11 110055.22 aC 80 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555621 a a a a a a a a a a ■
SE11 110055.22 aC 120 Q BA a110 a90 a55 a22,23 a8.600 aA2094110555721 a a a a a a a a a a ■
SE11 130055.22 aA 16 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555111 a a a a a a a a a a ■
SE11 130055.22 aA 24 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555211 a a a a a a a a a a ■
SE11 130055.22 aA 36 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555311 a a a a a a a a a a ▲
SE11 130055.22 aA 60 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555511 a a a a a a a a a a ▲
SE11 130055.22 aA 80 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555611 a a a a a a a a a a ▲
SE11 130055.22 aA 120 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555711 a a a a a a a a a a ▲
SE11 130055.22 aC 16 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555121 a a a a a a a a a a ■
SE11 130055.22 aC 24 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555221 a a a a a a a a a a ■
SE11 130055.22 aC 36 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555321 a a a a a a a a a a ▲
SE11 130055.22 aC 60 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555521 a a a a a a a a a a ▲
SE11 130055.22 aC 80 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555621 a a a a a a a a a a ▲
SE11 130055.22 aC 120 Q BA a130 a90 a55 a22,23 a7.300 aA2094130555721 a a a a a a a a a a ▲
This product excels in
• High stock removal
• Long life
• Less vibration
• Low noise
• Aggressive cut
Applications for the A quality, brown aluminium oxide
• Welding seams
• Descaling
• Grinding in corners and edges • Trimming of castings
• Steel sheets
• Thin profiles
• Railway tracks
Applications for the C quality, silicon carbide
• Ductile cast iron pipes
• Spherical castings
• Malleable cast iron
• Reinforced concrete
• Roof tiles
• Lime sand brick, artificial stone and dressed stone
• General stone
• Ceramic
• Grey iron castings
• Steel castings
• Marble
• Bottom plates
• Curbstones
• Fair faced brick
• Floating screed

204
Cup Wheels
Cup wheels for angle grinders, shape SE11 with steel cover and screw thread
Industry
Ordering example: A2094110551111
T
Packing unit:
10 pcs.
v max. : 50 m/s
H
D
J
Description aQuality aD aJ aT aH an max. aProduct-Number arecommended for a
a amm amm amm amm a(1/min) a a a
a a a a a a a a a
SE11 110055.M14 aA 16 Q BA a110 a90 a55 aM14 a8.600 aA2094110551111 a a a a a a a a a a ■
SE11 110055.M14 aA 24 Q BA a110 a90 a55 aM14 a8.600 aA2094110551211 a a a a a a a a a a ■
SE11 110055.M14 aA 36 Q BA a110 a90 a55 aM14 a8.600 aA2094110551311 a a a a a a a a a a ■
SE11 110055.M14 aA 60 Q BA a110 a90 a55 aM14 a8.600 aA2094110551511 a a a a a a a a a a ■
SE11 110055.M14 aA 80 Q BA a110 a90 a55 aM14 a8.600 aA2094110551611 a a a a a a a a a a ■
SE11 110055.M14 aA 120 Q BA a110 a90 a55 aM14 a8.600 aA2094110551711 a a a a a a a a a a ■
SE11 110055.M14 aC 16 Q BA a110 a90 a55 aM14 a8.600 aA2094110551121 a a a a a a a a a a ■
SE11 110055.M14 aC 24 Q BA a110 a90 a55 aM14 a8.600 aA2094110551221 a a a a a a a a a a ■
SE11 110055.M14 aC 36 Q BA a110 a90 a55 aM14 a8.600 aA2094110551321 a a a a a a a a a a ■
SE11 110055.M14 aC 60 Q BA a110 a90 a55 aM14 a8.600 aA2094110551521 a a a a a a a a a a ■
SE11 110055.M14 aC 80 Q BA a110 a90 a55 aM14 a8.600 aA2094110551621 a a a a a a a a a a ■
SE11 110055.M14 aC 120 Q BA a110 a90 a55 aM14 a8.600 aA2094110551721 a a a a a a a a a a ■
SE11 130055.M14 aA 16 Q BA a130 a90 a55 aM14 a7.300 aA2094130551111 a a a a a a a a a a ■
SE11 130055.M14 aA 24 Q BA a130 a90 a55 aM14 a7.300 aA2094130551211 a a a a a a a a a a ■
SE11 130055.M14 aA 36 Q BA a130 a90 a55 aM14 a7.300 aA2094130551311 a a a a a a a a a a ■
SE11 130055.M14 aA 60 Q BA a130 a90 a55 aM14 a7.300 aA2094130551511 a a a a a a a a a a ▲
SE11 130055.M14 aA 80 Q BA a130 a90 a55 aM14 a7.300 aA2094130551611 a a a a a a a a a a ▲
SE11 130055.M14 aA 120 Q BA a130 a90 a55 aM14 a7.300 aA2094130551711 a a a a a a a a a a ▲
SE11 130055.M14 aC 16 Q BA a130 a90 a55 aM14 a7.300 aA2094130551121 a a a a a a a a a a ■
SE11 130055.M14 aC 24 Q BA a130 a90 a55 aM14 a7.300 aA2094130551221 a a a a a a a a a a ■
SE11 130055.M14 aC 36 Q BA a130 a90 a55 aM14 a7.300 aA2094130551321 a a a a a a a a a a ■
SE11 130055.M14 aC 60 Q BA a130 a90 a55 aM14 a7.300 aA2094130551521 a a a a a a a a a a ▲
SE11 130055.M14 aC 80 Q BA a130 a90 a55 aM14 a7.300 aA2094130551621 a a a a a a a a a a ▲
SE11 130055.M14 aC 120 Q BA a130 a90 a55 aM14 a7.300 aA2094130551721 a a a a a a a a a a ▲
This product excels in
• High stock removal
• Long life
• Less vibration
• Low noise
• Aggressive cut
Applications for the A quality, brown aluminium oxide
• Welding seams
• Descaling
• Grinding in corners and edges • Trimming of castings
• Steel sheets
• Thin profiles
• Railway tracks
Applications for the C quality, silicon carbide
• Ductile cast iron pipes
• Spherical castings
• Malleable cast iron
• Reinforced concrete
• Roof tiles
• Lime sand brick, artificial stone and dressed stone
• General stone
• Ceramic
• Grey iron castings
• Steel castings
• Marble
• Bottom plates
• Curbstones
• Fair faced brick
• Floating screed

Always the right tool
The new LUKAS catalogue:
Our colour coding system has now been
extended by adding a “blue” range covering
a wide selection of new products.
This year for the first time, instead of being
buried under a pile of several manufacturers’
catalogues, you will find everything you need
in one single LUKAS catalogue.
Our surface optimizing consultants will help
you define an individual solution, specific to
your application.
Dr. Peter Bühner
Managing Director
LUKAS Group
www.lukas-erzett.com

206 Diamondtools
Content
Product line marking
Description
Page
• Technical Information 207
• Qualities and application 208
• Vacuum-Brazed Diamond Cutting Discs 209
• Diamond Cutting Discs 211
Packing unit:
25 pcs.
Ordering example: AS005673
The product lines are additionally
marked on the table with the product
line heading.
Further information
on page 14 and 15.
• Diamond Cup Wheels 217

Diamondtools
207
Technical Information
The Diamond
Diamonds are the hardest known material. They are selected
depending on the field of application. For diamond blade
manufacture synthetic diamonds are solely used. Compared to
natural diamonds, their properties are reproducible and controllable.
The following quality characteristics are significant for selecting
diamonds:
• degree of purity
• defined breaking strength
• sharp edges
• consistent geometry
Diamonds are classified by quality levels and grain sizes.
The Segment
The segments consist of diamond embedded metal powder. The
metal bond must be suited to the material to be cut. The metal
powder consists, for example, of bronze, cobalt, iron, metal
carbides, tungsten carbide. The various properties of metal powder
provide for sharpness and wear and tear of the segment. Segment
coating is carried out by sintering. Therefore, abrasive materials
require a hard bond against what hard materials call for soft bond.
Vibration
Standard
Forged
segment
break
Comparison of cutting properties low vibration cutting discs with narrow gaps
t
Due to the patented forged segment geometry
even high segments can be arranged with
small gaps in between. This produces considerably
lower vibration for the user. Another
essential advantage is safety. The dense
segments have been forged without any pores.
This ensures welding properties which provide
much more safety against fracture compared to
the usual sintered segments.
Forged segment
Resistance to fracture [N/mm]
• Universal and fast – owing to new types of
alloys in the segments
• Less vibration – owing to a trapezoid
segment geometry
X-rays
Forged
segment
Standard
EN13236
• More safety – owing to segment feet which
are free of pores and provide for the utmost
safety
• Against a fracture of the segment
Standard
Welding properties of forged segment: with highest safety against fracture
Measured value per segment
• Longer life – owing to higher segments and
retarded diamond shedding

208 Diamond Cutting Discs
Diamond Cutting Discs
best suitable
suitable
Diamond Cutting Discs
Height of
segments (mm)
Stoneware
Well-fired tiles
Tiles,
enamelled ceramics
Granite,
dressed stone bricks
Reinforced concrete
Concrete products,
pavement
General construction
material, roof tiles
Abrasive concrete, lime
sand brick, floating screed
Bitumen
Grey cast iron
LD Multi S13 13
TURBO HP S12 12
ABRASIV S13 13
FAST CUT S7 7
LD3 S10 10
LD7 S10 10
BLUE CUT plus S10 10
TURBO S10 10
FLIESE S7 7
DST HP S5 5
DST S6 6
VDC
VDCM The diamond cutting disc for various applications, see page 209

Vacuum-Brazed Diamond Cutting Disc
209
VDCM Multi, the exceptional cutting disc for nearly any workpiece
High Performance
Ordering example: A34911152022
Packing unit:
1 pc.
v max. : 80 m/s
VDC MULTI
H
D
T
Description aD aT aH an max. aProduct-Number arecommended for a
amm amm amm a(1/min) a a a
a a a a a a a
VDCM 115020 a115 a2,0 a22,23 a13.300 aA34911152022 a a a a a a a a a a ■
VDCM 125020 a125 a2,0 a22,23 a12.200 aA34911252022 a a a a a a a a a a ■
VDCM 180026 a180 a2,6 a22,23 a8.500 aA34911802622 a a a a a a a a a a ■
VDCM 230030 a230 a3,0 a22,23 a6.600 aA34912303022 a a a a a a a a a a ■
The segment coating made of carbide granulates prevents the disc from getting stuck
in soft workpieces. The result is a clean cut.
Special properties:
• Low temperatures
• No dust and build-up of odours
• No expiry date
• No reduction in diameter
Ideal for cutting of
• Grey cast iron (GG, GGG)
• Glass-fibre reinforced plastic (GRP)
• Normal and red brass
• Steel
• Bricks
• Reinforced concrete
• Stone, tiles, wood

210
Vacuum-Brazed Diamond Cutting Disc
VDC, a revolution in the cutting of grey cast iron
Packing unit:
1 pc.
v max. : 80 m/s
High Performance
Ordering example: A34901152222
VDC
H
D
T
Description aD aT aH an max. aProduct-Number arecommended for a
amm amm amm a(1/min) a a a
a a a a a a a
VDC 115022 a115 a2,2 a22,23 a13.300 aA34901152222 a a a a a a a a a a ■
VDC 125022 a125 a2,2 a22,23 a12.200 aA34901252222 a a a a a a a a a a ■
VDC 180026 a180 a2,6 a22,23 a8.500 aA34901802622 a a a a a a a a a a ■
VDC 230030 a230 a3,0 a22,23 a6.600 aA34902303022 a a a a a a a a a a ■
Special properties:
• Low temperatures
• No dust and build-up of odours
• No expiry date
• No reduction in diameter
Ideal for cutting of
• Grey cast iron (GG, GGG)
• Glass-fibre reinforced plastic (GFK)
• Normal and red brass

Diamond Cutting Disc
211
LD Multi S13, the Turbo cutting disc for various applications
High Performance
Ordering example: A344031151213083
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Promax aLD Multi S13 a115 a13 a22,23 a13.300 aA344031151213083 a a a a a a a a a a ■
Promax aLD Multi S13 a125 a13 a22,23 a12.200 aA344031251213093 a a a a a a a a a a ■
Promax aLD Multi S13 a150 a13 a22,23 a10.200 aA344031501213113 a a a a a a a a a a ■
Promax aLD Multi S13 a180 a13 a22,23 a8.500 aA344031801213133 a a a a a a a a a a ■
Promax aLD Multi S13 a230 a13 a22,23 a6.600 aA344032301213153 a a a a a a a a a a ■
Promax aLD Multi S13 a300 a13 a25,4 a5.100 aA344033002213183 a a a a a a a a a a ▲
Promax aLD Multi S13 a350 a13 a25,4 a4.400 aA344033502213213 a a a a a a a a a a ▲
Promax aLD Multi S13 a400 a13 a25,4 a3.800 aA344034002213243 a a a a a a a a a a ▲
This diamond cutting disc excels in:
• Most universal properties along with optimum cutting speed
• Long life
• Extreme running smoothness
• Low vibration due to trapezoid segment geometry
• The production process for the segments in forging technology has been covered by
patents
Bonding method: laser welded
Note: Cutting discs with 300 to 400 mm diameter are available on request with
20 mm bore. Please refer to the chart on page 208 for detailed information on applications.

212
Diamond Cutting Disc
Turbo HP S12, The Special Disc for Concrete
High Performance
Ordering example: A344031151212093
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Promax aTURBO HP S12 a115 a12 a22,23 a13.300 aA344031151212093 a a a a a a a a a a ■
Promax aTURBO HP S12 a125 a12 a22,23 a12.200 aA344031251212103 a a a a a a a a a a ■
Promax aTURBO HP S12 a150 a12 a22,23 a10.200 aA344031501212123 a a a a a a a a a a ▲
Promax aTURBO HP S12 a180 a12 a22,23 a8.500 aA344031801212143 a a a a a a a a a a ■
Promax aTURBO HP S12 a230 a12 a22,23 a6.600 aA344032301212153 a a a a a a a a a a ■
This diamond cutting disc excels in:
• A wide field of applications
• Long life
• Good cutting speed
Bonding method: laser welded
Please refer to the chart on page 208 for detailed information on applications.
Turbo S 10, the disc for the clear cut in building material or concrete
Industry
Ordering example: A344131151110013
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aTURBO S10 a115 a10 a22,23 a13.300 aA344141151110013 a a a a a a a a a a ■
Premiumflex aTURBO S10 a125 a10 a22,23 a12.200 aA344141251110013 a a a a a a a a a a ■
Premiumflex aTURBO S10 a150 a10 a22,23 a10.200 aA344141501110013 a a a a a a a a a a ▲
Premiumflex aTURBO S10 a180 a10 a22,23 a8.500 aA344141801110013 a a a a a a a a a a ■
Premiumflex aTURBO S10 a230 a10 a22,23 a6.600 aA344142301110013 a a a a a a a a a a ■
This diamond cutting disc excels in:
• Various applications
• Clear cuts
Please refer to the chart on page 208 for detailed information on applications.

Diamond Cutting Disc
213
Blue Cut plus S10, the economic type for many building materials
Industry
Ordering example: A344141151110093
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aBLUE CUT plus S10 a115 a10 a22,23 a13.300 aA344141151110093 a a a a a a a a a a ■
Premiumflex aBLUE CUT plus S10 a125 a10 a22,23 a12.200 aA344141251110093 a a a a a a a a a a ■
Premiumflex aBLUE CUT plus S10 a180 a10 a22,23 a8.500 aA344141801110093 a a a a a a a a a a ■
Premiumflex aBLUE CUT plus S10 a230 a10 a22,23 a6.600 aA344142301110093 a a a a a a a a a a ■
This diamond cutting disc excels in:
• An optimum price-performance ratio
Please refer to the chart on page 208 for detailed information on applications.
LD3 S10, our best cutting disc for concrete and building material
Industry
Ordering example: A344131151210083
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aLD3 S10 a115 a10 a22,23 a13.300 aA344131151210083 a a a a a a a a a a ■
Premiumflex aLD3 S10 a125 a10 a22,23 a12.200 aA344131251210093 a a a a a a a a a a ■
Premiumflex aLD3 S10 a150 a10 a22,23 a10.200 aA344131501210113 a a a a a a a a a a ▲
Premiumflex aLD3 S10 a180 a10 a22,23 a8.500 aA344131801210143 a a a a a a a a a a ■
Premiumflex aLD3 S10 a230 a10 a22,23 a6.600 aA344132301210163 a a a a a a a a a a ■
This diamond cutting disc excels in:
• Universal use in conrete/building material
• Excellent price-performance ratio
Bonding method: laser welded
Please refer to the chart on page 208 for detailed information on applications.

214
Diamond Cutting Disc
FAST CUT S7, the extra thin turbo cutting disc for ceramics and stoneware
High Performance
Ordering example: A344091151107013
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Promax aFAST CUT S7 a115 a7 a22,23 a13.300 aA344091151107013 a a a a a a a a a a ■
Promax aFAST CUT S7 a125 a7 a22,23 a12.200 aA344091251107013 a a a a a a a a a a ■
Promax aFAST CUT S7 a150 a7 a22,23 a10.200 aA344091501107013 a a a a a a a a a a ▲
Promax aFAST CUT S7 a180 a7 a22,23 a8.500 aA344091801107013 a a a a a a a a a a ▲
Promax aFAST CUT S7 a230 a7 a22,23 a6.600 aA344092301107013 a a a a a a a a a a ■
This diamond cutting disc excels in:
• An extra-thin segment coating and a reinforced flange area
• Fast and clear cuts through the hardest tiles
Please refer to the chart on page 208 for detailed information on applications.
FLIESE S7, the popular cutting disc for tiles and ceramics
Industry
Ordering example: A344111151107013
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aFLIESE S7 a115 a7 a22,23 a13.300 aA344111151107013 a a a a a a a a a a ■
Premiumflex aFLIESE S7 a125 a7 a22,23 a12.200 aA344111251107013 a a a a a a a a a a ■
Premiumflex aFLIESE S7 a150 a7 a22,23 a10.200 aA344111501107013 a a a a a a a a a a ▲
Premiumflex aFLIESE S7 a180 a7 a22,23 a8.500 aA344111801107013 a a a a a a a a a a ■
Premiumflex aFLIESE S7 a230 a7 a22,23 a6.600 aA344112301107013 a a a a a a a a a a ■
This diamond cutting disc excels in:
• Clear cuts in enamelled ceramics
Please refer to the chart on page 208 for detailed information on applications.

Diamond Cutting Disc
215
ABRASIV S13, the disc for professionals to use in fresh concrete
High Performance
Ordering example: A344053002213203
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Promax aABRASIV S13 a115 a13 a22,23 a13.300 aA344051151213083 a a a a a a a a a a ■
Promax aABRASIV S13 a125 a13 a22,23 a12.200 aA344051251213093 a a a a a a a a a a ■
Promax aABRASIV S13 a180 a13 a22,23 a8.500 aA344051801213133 a a a a a a a a a a ▲
Promax aABRASIV S13 a230 a13 a22,23 a6.600 aA344052301213163 a a a a a a a a a a ■
Promax aABRASIV S13 a300 a13 a25,4 a5.100 aA344053002213203 a a a a a a a a a a ▲
Promax aABRASIV S13 a350 a13 a25,4 a4.400 aA344053502213243 a a a a a a a a a a ▲
Promax aABRASIV S13 a400 a13 a25,4 a3.800 aA344054002213283 a a a a a a a a a a ▲
Promax aABRASIV S13 a450 a13 a25,4 a3.400 aA344054502213253 a a a a a a a a a a ▲
Promax aABRASIV S13 a500 a13 a25,4 a3.100 aA344055002213303 a a a a a a a a a a ▲
This diamond cutting disc excels in:
• Very universal properties along with optimum life
• Extreme running smoothness
• Low vibration due to trapezoid segment geometry
• The production process for the segments in forging technology has been
covered by patents
Bonding method: laser welded
Note: Cutting discs with 300 to 400 mm diameter are available on request with
20 mm bore.
Please refer to the chart on page 208 for detailed information on applications.

216
Diamond Cutting Disc
LD7 S10 for a perfect cutting of asphalt
Industry
Ordering example: A344173002210183
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aLD7 S10 a300 a10 a25,4 a5.100 aA344173002210183 a a a a a a a a a a ▲
Premiumflex aLD7 S10 a350 a10 a25,4 a4.400 aA344173502210213 a a a a a a a a a a ■
Premiumflex aLD7 S10 a400 a10 a25,4 a3.800 aA344174002210243 a a a a a a a a a a ■
Premiumflex aLD7 S10 a450 a10 a25,4 a3.400 aA344174502210283 a a a a a a a a a a ▲
Premiumflex aLD7 S10 a500 a10 a25,4 a3.100 aA344175002210303 a a a a a a a a a a ▲
This diamond cutting disc excels in:
• Especially shaped segments providing extreme running smoothness
and core protection
Bonding method: laser welded
Note: Cutting discs with 300 to 400 mm diameter are available on request with
20 mm bore.
Please refer to the chart on page 208 for detailed information on applications.

Diamond Cup Wheels
217
DST HP S5 to meet the highest expectations for stock removal and smooth running
High Performance
Ordering example: A344331001505083
Packing unit:
1 pc.
v max. : 80 m/s
H
D
H
D
X
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Promax aDST HP S5 a100 a5 a22,23 a15.300 aA344331001505083 a a a a a a a a a a ▲
Promax aDST HP S5 a125 a5 a22,23 a12.200 aA344331251505083 a a a a a a a a a a ■
Promax aDST HP S5 a180 a5 a22,23 a8.500 aA344331801505123 a a a a a a a a a a ▲
This diamond cup wheel excels in:
• High performance segments for maximum stock removal
• Universal segment alloy for concrete/granite
• Low vibration during working due to inductive welded segments
(no imbalance in tool)
• Optimum suction at segment
Please refer to the chart on page 208 for detailed information on applications.
DST S6, the low-priced cup wheel for universal application
Industry
Ordering example: A344431251606183
Packing unit:
1 pc.
v max. : 80 m/s
H
D
X
Description aQuality aD aHeight of aH an max. aProduct-Number arecommended for a
a amm asegments amm a(1/min) a a a
a a aXmm a a a a a
Premiumflex aDST S6 a125 a6 a22,23 a12.200 aA344431251606183 a a a a a a a a a a ■
Premiumflex aDST S6 a180 a6 a22,23 a8.500 aA344431801606183 a a a a a a a a a a ▲
This diamond cup wheel excels in:
• Excellent price-performance ratio
• Optimum arrangement of segments for high grinding performance and clean surface
Please refer to the chart on page 208 for detailed information on applications.