Safety Precaution Sheet To be read carefully before use - Logitech Ltd
Safety Precaution Sheet To be read carefully before use - Logitech Ltd
Safety Precaution Sheet To be read carefully before use - Logitech Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
!<br />
NB <strong>Logitech</strong> <strong>Ltd</strong>. assert it’s right under the<br />
Copyright, Designs and Patents Act 1988<br />
to <strong>be</strong> identified as the author of this work.<br />
c <strong>Logitech</strong> Limited. All rights reserved.<br />
<strong>Safety</strong> <strong>Precaution</strong> <strong>Sheet</strong><br />
<strong>Logitech</strong> Lapping and Polishing Machines<br />
<strong>To</strong> <strong>be</strong> <strong>read</strong> <strong>carefully</strong> <strong>be</strong>fore <strong>use</strong><br />
1. The operator should <strong>be</strong> fully aware of the <strong>use</strong> of the machine<br />
according to the Operation Manual.<br />
2. The machine must <strong>be</strong> placed in an adequate working position,<br />
providing stable support and adequate ventilation. All functions on<br />
the machine and any connected equipment must <strong>be</strong> in working<br />
order.<br />
3. Be sure that the supply voltage corresponds to the voltage stated<br />
on the back of the machine. The machine must <strong>be</strong> earthed.<br />
4. Establish efficient exhaust from the working area if consumables<br />
containing alcohol, for example, are <strong>be</strong>ing <strong>use</strong>d.<br />
5. Make sure that the lapping or polishing plate is correctly mounted,<br />
the driving pins engaged with the holes in the turntable.<br />
6. Before loading or unloading the specimen holder, ensure that the<br />
plate has completely stopped rotating.<br />
7. Keep clear of the rotating plate and spec imen holder during<br />
operation. Make sure that any screws for clamping of specimens in<br />
holders protrude as little as possible.<br />
8. Before loading or unloading the abrasive cylinder, ensure that the<br />
abrasive drive has completely stopped.<br />
9. Observe the current safety regulations for handling, emptying and<br />
disposal of the waste materials and fluids.<br />
10. Always turn off the power and remove the plug or cable <strong>be</strong>fore<br />
opening the machine or working on any terminal connections.<br />
The apparatus/machine is designed for <strong>use</strong> with consumables supplied<br />
by <strong>Logitech</strong>. If subjected to mis<strong>use</strong>, improper installation, alteration,<br />
neglect, accident or improper repair, <strong>Logitech</strong> will take no responsibility<br />
for damage(s) to the <strong>use</strong>r or the equipment.<br />
Dismantling of any part of the apparatus/machine, in case of service or<br />
repair, should always <strong>be</strong> performed by a qualified technician<br />
(electromechanical, electronic, mechanical, pneumatic, etc.).
Change language