TKR-750 service manual
TKR-750 service manual
TKR-750 service manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OPERATING FEATURES<br />
<strong>TKR</strong>-<strong>750</strong><br />
3. Programmable Functions<br />
<strong>TKR</strong>-<strong>750</strong> contains many Programmable Functions tabled below.<br />
Programmable Function<br />
Description<br />
AUX Out 1~5 Off<br />
AUX Out 1 to 5 ports become deactivated, respectively.<br />
AUX I/O 1~6 Off<br />
AUX I/O 1 to 6 ports become deactivated, respectively.<br />
AUX Out 1~5 On<br />
AUX Out 1 to 5 ports become activated, respectively.<br />
AUX I/O 1~6 On<br />
AUX I/O 1 to 6 ports become activated, respectively.<br />
AUX Out 1~5 On/Off AUX Out 1 to 5 ports are toggled between its active and inactive states, respectively.<br />
AUX I/O 1~6 On/Off AUX I/O 1 to 6 ports are toggled between its active and inactive states, respectively.<br />
Channel 1~16<br />
Directly select Channel 1 to 16, respectively.<br />
Channel Down<br />
The channel decrements by one.<br />
Channel Up<br />
The channel increments by one.<br />
CW ID On<br />
The CW ID is transmitted.<br />
CW Message 1~8 On The CW Message 1 to 8 is transmitted, respectively.<br />
Display Off<br />
All panel LEDs are turned off except the Power LED.<br />
Display On<br />
All panel LEDs become active as normal status indicators on the repeater.<br />
Display On/Off<br />
All panel LEDs, with the exception of the Power LED, are toggled between off and their normal status on<br />
the repeater.<br />
Hold Time Enable<br />
The Parameter of Repeat Hold Time is enabled.<br />
Hold Time Disable<br />
The Parameter of Repeat Hold Time is disabled.<br />
Hold Time Disable/Enable The Parameter of Repeat Hold Time is toggled between disabled and enabled.<br />
Local Tx Disable<br />
The local mic’s PTT is disabled.<br />
Local Tx Enable<br />
The local mic’s PTT is enabled.<br />
Local Tx Disable/Enable The local mic’s PTT is toggled between disabled and enabled.<br />
Monitor Off<br />
The QT/DQT decoder is disabled.<br />
Monitor On<br />
The QT/DQT decoder is enabled.<br />
Monitor On/Off<br />
The QT/DQT decoder is toggled between disabled and enabled.<br />
Monitor Momentary<br />
The QT/DQT decoder is momentarily disabled.<br />
Multi Table Sub<br />
Multi Table No. Select Signalling changes to the Multi Table Sub.<br />
Multi Table Main<br />
Multi Table No. Select Signalling changes to the Multi Table Main.<br />
Multi Table Main/Sub Multi Table No. Select Signalling changes between Multi Table Sub and Multi Table Main.<br />
QT/DQT Dec Disable Disables the QT/DQT decode operation.<br />
QT/DQT Dec Enable Enables the QT/DQT decode operation.<br />
QT/DQT Dec Disable/Enable Toggles between disabling and enabling the QT/DQT decode operation.<br />
QT/DQT Enc Disable Disables the QT/DQT encode operation.<br />
QT/DQT Enc Enable<br />
Enables the QT/DQT encode operation.<br />
QT/DQT Enc Disable/Enable Toggles between disabling and enabling the QT/DQT encode operation.<br />
Repeat Disable<br />
Disables repeater operation.<br />
Repeat Enable<br />
Enables repeater operation.<br />
Repeat Disable/Enable Toggles between disabling and enabling repeater operation.<br />
Reset<br />
Resets to default condition set up by FPU.<br />
DC Power Save Off<br />
Activates DC Power Save Mode Off.<br />
DC Power Save On<br />
Activates DC Power Save Mode On.<br />
DC Power Save On/Off Toggles between DC Power Save Mode On and Off.<br />
5