eco-ATWB Marketing - Evapco

SAGE SYSTEM
Conservation Control System
HMI Panel Display
All Sage 2® and Sage 3® Control Panels are provided with a
10” touch screen operator interface with a color display.
This allows for easy viewing and control at the panel.
Window Enclosure
The display screen is encased by a window enclosure. This
enclosure protects the HMI display from the elements.
Easy-to-use Touch Screen Navigation
The panel boasts an easy to navigate menu which will allow
the user to control each cell independently from other units
and gather useful run time information at the unit.
Alarm Setpoints Screen
Electric Water Level Control Package
When a Sage ® Panel is provided, a 5-probe Electronic Water
Level Controller is standard. In addition to controlling the
make-up valve, this controller contains two probes that can be
utilized as High/Low water alarms. This controller will also be
used as a safety device, shutting off the pump and heaters if
the water level becomes too low.
Temperature Sensors
Four separate temperature data points are monitored with
this package.
• Inlet Temperature Sensor: 32ºF – 212ºF range
• Outlet Temperature Sensor: 32ºF – 212ºF range
• Dry Bulb Temperature Sensor: -30ºF – 130ºF range
• Basin Temperature Sensor: 32ºF – 212ºF range
Enclosure Temperature Control
The panel enclosure includes an intake and an exhaust
ventilation fan. When the enclosure temperature rises to a
predetermined set point, the exhaust fans are activated. The
enclosure also contains a heater. The heater eliminates the
drastic temperature changes which could create condensation
inside of the enclosure.
Plan View Screen
Fan
Heater
End View Screen
*Optional Communication Protocol May Be Available.
Please Contact Your Local Sales Representative.
15