Education Center - Rochester Institute of Technology

More documents

Recommendations

Info

OSHA Education Center Course Offerings 500, 501, 502, 503, 510 8 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This train-the-trainer course is for private-sector personnel interested in teaching the 10- and 30- hour construction safety and health outreach program to their employees and other interested groups. Special emphasis is placed on those topics that are required in the 10- and 30-hour programs as well as on those that are the most hazardous, using OSHA standards as a guide. Course participants are briefed on effective instructional approaches and the effective use of visual aids and handouts. This program allows students to become trainers in the Outreach Program, conduct both a 10- and 30-hour construction safety and health course, and issue cards to participants verifying course completion. Students who wish to participate as authorized trainers in the Outreach Program must successfully pass a written exam at the end of this course. Prerequisite: Students must have completed course 510 or have the equivalent training and five years of construction experience to take this course. • OSHA inspection procedures • Safety training programs • Hazard communication and health hazards • Personal protective equipment (PPE) • Fire prevention and equipment • Materials handling • Tools • Welding • Electrical • Scaffolds • Fall protection • Confined-space entry • Trenching 501 Trainer Course in Occupational Safety and Health Standards for General Industry “Dale brought out the best in everyone. Dale has so much info on each topic. Awesome.” 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course presents detailed information on how the provisions of the OSH Act may be implemented in the workplace. Rights and responsibilities under the OSH Act, the appeals process, and recordkeeping are covered. Included are an introduction to OSHA’s general industry standards and an overview of the requirements of the more frequently referenced standards. This course allows the student to become a trainer in the Outreach Program, conduct both a 10- and 30-hour general industry course, and issue cards to participants verifying course completion. Students who wish to participate as authorized trainers in the Outreach Program must successfully pass a written exam at the end of the course. Prerequisite: Students must have completed course 511 or have the equivalent training and five years’ experience to take this course. • Subpart H - Hazardous materials handling • Subpart Z - Substance specific regulations • Voluntary compliance programs • Walking/working surfaces • Means of egress • Hazardous materials • Recordkeeping • Bloodborne pathogens • Permit-required confined space • Fire protection • Machine guarding • Personal protective equipment (PPE) 502 Update for Construction Industry Outreach Trainers 3 days $595 CEUs: 1.8 ABIH CM Points: 3 This course is designed for private-sector personnel who have completed OSHA 500 and who are active trainers in the Outreach Program or those in the construction industry who would like to keep current their knowledge of the OSHA standards in 29 CFR 1926. Registration will not be completed until the participant provides a copy of his or her Construction Industry Outreach Trainer card or certificate. Required for Outreach Trainers every four years • OSHA construction standards • OSHA construction policies • OSHA construction regulations 503 Update for General Industry Outreach Trainers “Great use of different instructional material. One of the best update courses I have attended. Dale is an expert in his field and it is always helpful to learn from him.” 3 days $595 CEUs: 1.8 ABIH CM Points: 3 This course is designed for private-sector personnel who have completed OSHA 501 and who are active trainers in the Outreach Program or those in general industry who would like to keep current their knowledge of the OSHA standards in 29 CFR 1910. Registration will not be completed until the participant provides a copy of his or her General Industry Outreach Trainer card or certificate. Required for Outreach Trainers every four years • OSHA general industry standards • OSHA general industry policies • OSHA general industry regulations 510 Occupational Safety and Health Standards for the Construction Industry “Mike and Bob’s real-world consulting and inspection experience was a good help.” 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course covers OSHA’s policies, procedures, and standards as well as construction safety and health principles. Topics include scope and application of the OSHA construction standards. Special emphasis is placed on those areas that are most hazardous, and hands-on demonstrations will be provided for such topics as scaffolding, fall protection, and confined-space entry. Students will examine 29 CFR 1926 in great detail. This is an entry-level course that will provide you with basic safety knowledge for the construction industry. Students who successfully complete this course will receive a 30-hour card. • Recordkeeping • Subpart E - Personal protective equipment • Subpart D - Hazard communication • Confined-space entry • Subpart T and U - Demolition and blasting • Subpart P - Trenching and excavation • Subpart I - Hand and power tools • Fire protection • Subpart J - Welding • Subpart N - Cranes, derricks, hoists, and conveyors • Fall protection • Subpart L - Scaffolding
Register now! Call toll-free 1-866-385-7470 ext. 2919 or visit www.rit.edu/osha for convenient online registration. Course Offerings 511, 521, 2015, 2045 2015 Hazardous Materials 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course covers OSHA general industry standards and integrates materials from other consensus and proprietary standards that relate to hazardous materials. Included are flammable and combustible liquids, compressed gases, LP-gases, and cryogenic liquids. Related processes such as spraying and dipping are covered, as is electrical equipment. • CFR 1910 Subpart H • Introduction to hazardous materials • Flammable and combustible liquids • Classification tanks and piping • Compressed gases • Spray finishing • Dip tanks • Liquefied petroleum gases • HAZWOPER • Cryogenics • Confined-space entry • Process safety management • Compliance issues 511 Occupational Safety and Health Standards for General Industry “Mike had strong field knowledge of related topics.” 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course covers permissible exposure limits; OSHA health standards, regulations, and procedures; respiratory protection; engineering controls; hazard communication; sampling instrumentation; workplace health program elements; and other industrial hygiene topics. A workshop in health hazard recognition, OSHA health standards, and safety and health programs is a feature of this course. Students who successfully complete this course will receive a 30-hour card. • Respiratory protection • Resources • Health hazards • Risk factors • Risk factor analysis • Materials handling • NIOSH findings • Upper limb disorders • Office ergonomics • Review and analysis of proposed ergonomic standards 521 OSHA Guide to Industrial Hygiene “Dale uses his extensive background and real-life experiences to create a very effective and positive learning environment.” 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course addresses industrial hygiene practices and related OSHA regulations and procedures. Topics include permissible exposure limits, OSHA health standards, respiratory protection, engineering controls, hazard communication, OSHA sampling procedures and strategy, workplace health program elements, and other industrial hygiene topics. The course features workshops in health hazard recognition, OSHA health standards, and a safety and health program workshop. • OSHA health standards • Respiratory protection • Hazard communication • Personal protective equipment (PPE) • Air contaminant standards • Detector tubes • Noise standards • Asbestos standards • Recordkeeping • Workplace health program elements • Confined-space entry • Ventilation • Ergonomics • Bloodborne pathogens 2045 Machinery and Machine Guarding Standards 4 days $695 CEUs: 2.6 ABIH CM Points: 4 This course familiarizes the student with various types of common machinery and the related safety standards. Guidance is provided on the hazards associated with various kinds of machinery and the control of hazardous energy sources (lockout/tagout). The course presents an approach to machinery inspection that enables participants to recognize hazards and to provide options to achieve abatement. These hazards include mechanical motions and actions created by points of operation and other machinery processes. This course includes a hands-on field trip where you’ll apply the knowledge you learned in class to guard actual production equipment. • Robotics • Lockout/tagout (1910.147) • Woodworking (1910.213) • Abrasive wheels (1910.215) • Mills/calendars (1910.216) • Power presses (1910.217) • Forging (1910.918) • Power transmission (1910.219) • Subpart 0 - Machinery and machine guarding • Subpart P - Hand and portable power tools 9
Page 1 and 2: Education Center Schedule of Course
Page 3 and 4: Register now! Call toll-free 1-866-
Page 7: Register now! Call toll-free 1-866-

Education Center - Rochester Institute of Technology

Create successful ePaper yourself

Delete template?

Save as template?