TO 35-1-3 - Robins Air Force Base

More documents

Recommendations

Info

TO 35-1-3 Legend for Figure 4-29. Index No. Markings Size Color* 1 FIELD NUMBERS 4-inch Black 2 TIRE PRESSURE XX PSI 1/2-inch Black 3 MAX TOW SPEED 15 MPH 1/2-inch Black 4 USE CABLE GUARDS WHEN HOISTING 1-inch Black 5 DO NOT FORKLIFT 1/2-inch Black 6 DOOR MUST BE OPEN DURING OPERATION 1/2-inch Black 7 WARNING THIS UNIT WIRED FOR 220 VOLT, 60 HZ OR 400 VOLTS, 60 HZ 8 CAUTION BEFORE TOWING LATCH PINTLE (IF PINTLE HOOK INSTALLED) CLOSE TRIPLOCK INSTALL LOCK PIN 9 WARNING A CONTINUOUS GROUND SYSTEM MUST BE AVAILABLE BETWEEN POWER SOURCE, HEATER AND UNIT OR AREA BEING SUPPLIED WITH CONDITIONED AIR 1-inch 1/2-inch or decal PN 3613506 1-inch Red Black Red * - Standard caution/informational marking color will be non-reflective black. Standard safety/warning marking color will be non-reflective red. NOTE: Use appropriate stencil per unit configuration. NOTE: HDU-13/M Model H41 utilizes 200V, 400 HZ. Adjust stencil to reflect proper configuration. 4-56
TO 35-1-3 Figure 4-29. HDU-13M Heater 4-57
Page 1 and 2:
TO 35-1-3 TECHNICAL MANUAL CORROSIO
Page 3 and 4:
TO 35-1-3 TABLE OF CONTENTS Chapter
Page 5 and 6:
TO 35-1-3 TABLE OF CONTENTS - Conti
Page 7 and 8:
TO 35-1-3 LIST OF ILLUSTRATIONS Num
Page 9 and 10:
TO 35-1-3 FOREWORD 1. PURPOSE. The
Page 11 and 12:
TO 35-1-3 SAFETY SUMMARY 1. GENERAL
Page 13 and 14:
CHAPTER 1 CORROSION THEORY, IDENTIF
Page 15 and 16:
TO 35-1-3 Table 1-1. Galvanic Serie
Page 17 and 18:
TO 35-1-3 sion. Improper dilution o
Page 19 and 20:
TO 35-1-3 1.6.7.3 When dry, some mi
Page 21 and 22:
TO 35-1-3 Figure 1-7. Example of Pi
Page 23 and 24:
TO 35-1-3 Figure 1-11. Illustration
Page 25 and 26:
TO 35-1-3 1.8 METALS AFFECTED BY CO
Page 27 and 28:
TO 35-1-3 CHAPTER 2 CLEANING 2.1 GE
Page 29 and 30:
TO 35-1-3 E Table 2-1. Wash Interva
Page 31 and 32:
TO 35-1-3 Table 2-1. Wash Interval
Page 34 and 35:
TO 35-1-3 2.1.5.3 Immersion in clea
Page 36 and 37:
TO 35-1-3 2.1.6.2.10 MIL-PRF-87937,
Page 38 and 39:
TO 35-1-3 Table 2-2. Authorized Cle
Page 40 and 41:
TO 35-1-3 2.1.7.2 Cleaning Compound
Page 42 and 43:
TO 35-1-3 removal and surface treat
Page 44 and 45:
TO 35-1-3 2.2.6.1 Authorized HPW Eq
Page 47 and 48:
TO 35-1-3 CHAPTER 3 PAINTING, SEALI
Page 49 and 50:
TO 35-1-3 3.3.2.3.1 Unless otherwis
Page 51 and 52:
TO 35-1-3 Table 3-1. Authorized Coa
Page 53 and 54:
TO 35-1-3 3.5.2.3 Air Force will ac
Page 55 and 56:
TO 35-1-3 with AMS 3367, Class A or
Page 57 and 58:
TO 35-1-3 3.11 MAINTENANCE STAND RA
Page 59 and 60:
TO 35-1-3 b. Type III An ultra thin
Page 61 and 62:
TO 35-1-3 Table 3-2. Pretreatment I
Page 63 and 64:
TO 35-1-3 b. Azko Nobel 10P3-2 Akzo
Page 65 and 66:
TO 35-1-3 removed prior to the fina
Page 67 and 68:
TO 35-1-3 3.22.1 SE Undercoating Co
Page 69:
TO 35-1-3 3.26.7 Wire Harness and C
Page 72 and 73:
TO 35-1-3 4.2.3.4 Other optional in
Page 74 and 75: TO 35-1-3 Figure 4-3. Sample Mobili
Page 76 and 77: TO 35-1-3 Legend for Figure 4-4. In
Page 88 and 89: TO 35-1-3 Legend for Figure 4-10. I
Page 116 and 117: TO 35-1-3 Pages 4-46 and 4-47 were
Page 174 and 175:
TO 35-1-3 Legend for Figure 4-53 -
Page 176 and 177:
TO 35-1-3 Legend for Figure 4-54. I
Page 178 and 179:
TO 35-1-3 Figure 4-54. New Generati
Page 180 and 181:
TO 35-1-3 Figure 5-1. Angle Iron Se
Page 182 and 183:
TO 35-1-3 87937, Type I), which con
Page 184 and 185:
TO 35-1-3 • Gas Tungsten-Arc (TIG
Page 187 and 188:
TO 35-1-3 CHAPTER 7 SOUTHWEST ASIA
Page 189:
TO 35-1-3 7.2.2.1.6 Felt-Soundproof
Page 192 and 193:
TO 35-1-3 Table A-1. Equipment and
Page 194 and 195:
TO 35-1-3 Nomenclature/Description
Page 196 and 197:
Page 198:
show all

TO 35-1-3 - Robins Air Force Base

Create successful ePaper yourself

Delete template?

Save as template?