zehnder nova

Product description
zehnder nova completto
The picture shows the vertical model
Description
Zehnder Nova Completto is a Zehnder Nova radiator with a built-in
AV 6 (Oventrop) thermal valve in its upper side section (on the left or
on the right) and a Zehnder thermostat, connection thread size is
M30 x 1.5 mm.
Connections: 2 x 1 /2“ (female thread size) in the lower part of the radiator
with an connection spacing of 50 mm. Suspension brackets are
welded to the radiator’s back surface.
The radiator is supplied in an installation-ready package;
by request:
• mounting set CVD
• without the Zehnder thermostat
Shipping limitations for deliveries from the factory
Model (Nominal) Installation Installation Incremental
Installation length, mm depth, mm changes in
height, mm
height, mm
Vertical design
NV 600 - 4600
NVL 600 - 2400
NVV 600 - 4600
112 - 1703
212 - 1703
212 - 709
45
58
92
Maximum recommended water flow rate 250 kg/hr
200
Incremental
changes in
length, mm
71
Additional advantages
• radiator with thermal valve ready for installation
• can use any suitable thermostat M 30 x 1.5 mm
• pre-installed AV 6 (Oventrop) valve
Technical parameters
Horizontal models
Installation length
Installation height
Installation depth
from 500 to 6000 mm
from 70 to 1703 mm
from 45 to 128 mm
Vertical models
Installation length
from 70 to 1703 mm
Installation height
from 600 to 4600 mm
Installation depth
from 45 to 58 mm
Eye-to-eye connection
from 30 to 60 mm
Operating pressure
4.6 bar (6 bar test)
Operating temperature max. 120°
3