zehnder nova

More documents

Recommendations

Info

Product description zehnder nova durchbruch The picture shows the horizontal model Description Zehnder Nova Durchbruch is a Zehnder Nova radiator with a special opening in its front panel of tubes for a valve, a built-in AV 6 (Oventrop) thermal valve in its front section (on the right or on the left), and a Zehnder thermostat, connection thread size is M30 x 1.5 mm. Connections: 2 x 1 /2“ (female thread size) in the lower part of the radiator with an connection spacing of 50 mm. Suspension brackets are welded to the radiator’s back surface. Additional advantages • radiator, primed and finished with powder enamel of RAL 9016 colour • built-in temperature controller • connections: 2 x 1 /2“ (female thread size) in the lower part of the radiator • air-vent connection 1 x 1 /2“ • welded-on suspension brackets The radiator is supplied in an installation-ready package; by request: • mounting set CVD • without the Zehnder thermostat Technical parameters Horizontal models Installation length Installation height Installation depth from 500 to 6000 mm from 70 to 1703 mm from 45 to 128 mm Vertical models Installation length from 70 to 1703 mm Installation height from 600 to 4600 mm Installation depth from 45 to 58 mm Eye-to-eye connection from 30 to 60 mm Operating pressure 4.6 bar (6 bar test) Operating temperature max. 120° Shipping limitations for deliveries from the factory Installation length, mm Installation depth, mm Incremental changes in height, mm Model (Nominal) Installation height, mm Horizontal design NH 210 - 1680 NHL 210 - 280 NHL 350 - 840 NHH 210 - 1260 NHLH 210 - 700 NHLLH 210 - 840 NHLLHL 210 - 840 500 - 2000 2000 - 6000 45 45 60 53 92 92 128 Maximum recommended water flow rate 250 kg/hr 71 Incremental changes in length, mm 100 200 4
zehnder nova Horizontal models NH NHL NHH NHLH NHL LH NHLLHL 1mm 5
Page 1 and 2: zehnder nova
Page 3: Product description zehnder nova co
Page 7 and 8: connection codes zehnder nova horiz
Page 9 and 10: Recommended mounting sets for easy
Page 11 and 12: Recommended mounting sets for horiz
Page 13 and 14: Technical parameters per section: S
Page 15 and 16: Technical parameters / Horizontal m
Page 17 and 18: Technical parameters per section: S
Page 19 and 20: Technical parameters / Vertical mod
Page 21 and 22: Pressure losses zehnder nova Determ
Page 23 and 24: Suspension brackets zehnder nova Fo
Page 25 and 26: Suspension brackets zehnder nova Fo
Page 27 and 28: zehnder Notes 27

zehnder nova

Create successful ePaper yourself

Delete template?

Save as template?