Xerox WorkCentre 5632/5638/5645/5655 - Common Criteria

Xerox WorkCentre 5632/5638/5645/5655/5665/5675/5687
Multifunction Systems Security Target
FDP_IFF.1.2
FDP_IFF.1.3
].
o
no security attributes
the FAX board
o
PSTN port in use or not
fax image information and job data
o
address of the memory where the data is stored (on
the copy controller or on the FAX board)
command messages
o
Type of the command message between FAX
board and copy controller
The TSF shall permit an information flow between a
controlled subject and controlled information via a controlled
operation if the following rules hold: [
].
The copy controller is allowed to copy fax image
information and job data from the shared memory of the
FAX board to its own memory.
The copy controller is allowed to copy fax image
information and job data from its own memory to the
shared memory of the FAX board.
The FAX board is allowed to send out a fax over PSTN
once the copy controller has signaled the end of the
copy operation to the shared memory area.
The FAX board is allowed to signal the copy controller
“Fax received” once the PSTN connection has been
terminated.
The network controller is allowed to send image
information and respective commands to the copy
controller.
The TSF shall enforce [the following additional information
flow control SFP rules
].
The FAX board is allowed to send command messages
to the copy controller.
The copy controller is allowed to send command
messages to the FAX board.
49
Copyright 2009 Xerox Corporation, All rights reserved