You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PTZ SETUP & FRONT PLANE CONTROL<br />
EXAMPLE :<br />
A PTZ camera at channel 3 with PELCO-D, 9600bps.<br />
1. Press the channel button 3 into full screen mode.<br />
2. And a “PTZ” mark appeared at left upper corner.<br />
REC 2005/10/10 MON 12:00:00 50% 120P<br />
PTZ<br />
3. Press the MENU button into setup mode.<br />
By ▲ or ▼ to switch item & by ◄ or ► to change SPEED/ PROTOCOL &<br />
BAUD RATE.<br />
REC 2005/10/10 MON 12:00:00 50% 120P<br />
PTZ<br />
PTZ SETUP<br />
O<br />
O<br />
O<br />
O<br />
UP-DOWN SPEED: OOOOO<br />
LEFT-RIGHT SPEED: OOOOO<br />
AUTO SCAN SPEED: OOOOO<br />
PROTOCOL TYPE: PELCO-D<br />
O BAUD RATE: 9600<br />
4. Press the MENU button again back to PTZ control mode.<br />
5. With the following label to control PTZ camera.<br />
NO. LABEL PTZ NO. LABEL PTZ<br />
5 ▼ Down 11 PB Zoom in<br />
6 ◄ Left 13 ENTER Home<br />
7 ▲ Up 14 AUTO Auto Scan<br />
8 ► Right 17 WM Zoom out<br />
9 MENU PTZ setup 18 SEL<br />
Enter or exit<br />
PTZ mode<br />
6. Press the SEL button quite to PTZ control mode.<br />
11