02.07.2014 Views

GM Owner Manuals - Buick

GM Owner Manuals - Buick

GM Owner Manuals - Buick

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SERVICE PARK LAMPS<br />

This message displays when there is a problem with the<br />

park lamps. Check to see if the park lamp fuse is blown<br />

and replace the fuse if necessary. See Fuses and Circuit<br />

Breakers on page 5-99 and Instrument Panel Fuse Block<br />

on page 5-100 for more information. If changing the fuse<br />

does not correct the problem, see your dealer/retailer.<br />

This message only displays while the ignition is in<br />

ON/RUN. Press any of the DIC buttons to acknowledge<br />

this message and to clear it from the screen.<br />

This message continues to display for two seconds<br />

if it has not been acknowledged when the engine<br />

is turned off. It also re-displays for two seconds if the<br />

message has been acknowledged, but the condition<br />

still exists when the engine is turned off.<br />

If the condition still exists, the message re-appears<br />

when the engine is turned on.<br />

SERVICE STABILITY SYSTEM<br />

If your vehicle has StabiliTrak, this message displays if<br />

there has been a problem detected with StabiliTrak.<br />

A warning light also appears on the instrument panel<br />

cluster. See Traction Control System (TCS) Warning<br />

Light on page 3-37. See StabiliTrak ® System on<br />

page 4-6 for more information.<br />

If this message turns on while you are driving, pull off<br />

the road as soon as possible and stop carefully. Try<br />

resetting the system by turning the ignition off and then<br />

back on. If this message still stays on or turns back on<br />

again while you are driving, your vehicle needs service.<br />

Have the StabiliTrak System inspected by your dealer/<br />

retailer as soon as possible.<br />

This message displays only while the ignition is in<br />

ON/RUN. Press any of the DIC buttons to acknowledge<br />

this message and to clear it from the screen.<br />

This message continues to display for two seconds<br />

if it has not been acknowledged when the engine<br />

is turned off. It also re-displays for two seconds if the<br />

message has been acknowledged, but the condition<br />

still exists when the engine is turned off.<br />

If the condition still exists, the message re-appears<br />

when the engine is turned on.<br />

3-69

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!