02.07.2014 Views

GM Owner Manuals - Buick

GM Owner Manuals - Buick

GM Owner Manuals - Buick

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Taillamps, Turn Signal, Sidemarker,<br />

Stoplamps and Back-up Lamps<br />

To replace a taillamp, turn signal, sidemarker, stoplamp<br />

or back-up lamp bulb:<br />

1. Open the trunk. See Trunk on page 2-12.<br />

2. Remove the convenience net.<br />

4. Pull back the trunk trim.<br />

5. Turn the two wing nuts counterclockwise and<br />

remove them.<br />

6. Pull out the taillamp assembly and disconnect the<br />

wiring harness.<br />

3. Turn the four plastic wing nuts retaining the trunk<br />

trim counterclockwise. There are two wing nuts<br />

located on the driver side (shown) and two located<br />

on the passenger side of the vehicle.<br />

5-50

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!