02.07.2014 Views

GM Owner Manuals - Buick

GM Owner Manuals - Buick

GM Owner Manuals - Buick

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Remote Vehicle Start<br />

Your vehicle may have a remote starting feature that<br />

allows you to start the engine from outside the vehicle.<br />

It may also start the vehicle’s heating or air conditioning<br />

systems and rear window defogger. When the remote<br />

start system is active and the vehicle has an automatic<br />

climate control system, it will automatically regulate<br />

the inside temperature. Normal operation of these<br />

systems will return after the ignition key is turned to<br />

ON/RUN.<br />

Laws in some communities may restrict the use of<br />

remote starters. For example, some laws may require a<br />

person using remote start to have the vehicle in view<br />

when doing so. Check local regulations for any<br />

requirements on remote starting of vehicles.<br />

Do not use the remote start feature if your vehicle<br />

is low on fuel. Your vehicle may run out of fuel.<br />

If your vehicle has the remote start feature, the RKE<br />

transmitter functions will have an increased range<br />

of operation. However, the range may be less while the<br />

vehicle is running.<br />

There are other conditions which can affect the<br />

performance of the transmitter, see Remote Keyless<br />

Entry (RKE) System on page 2-3 for additional<br />

information.<br />

/ (Remote Start): This button will be on the RKE<br />

transmitter if you have remote start.<br />

To start the vehicle using the remote start feature:<br />

1. Aim the transmitter at the vehicle.<br />

2. Press and release the transmitter’s lock button,<br />

then immediately press and hold the transmitter’s<br />

remote start button for about four seconds or<br />

until the vehicle’s turn signal lamps flash. The doors<br />

will lock.<br />

When the vehicle starts, the parking lamps turn on<br />

and remain on while the engine is running.<br />

The remote start feature provides two separate starts<br />

per ignition cycle, each with 10 minutes of engine<br />

running time, or one start with a time extension. The<br />

first start must expire or be canceled to get two separate<br />

10 minute starts.<br />

If it is the first remote start since the vehicle has been<br />

driven, repeat the previous steps, while the engine is still<br />

running, to extend the engine running time by 10 minutes<br />

from the time you repeat the steps for remote starting.<br />

The remote start running time can be extended one time<br />

and only after the first remote start.<br />

After entering the vehicle during a remote start, insert<br />

and turn the key to ON/RUN to drive the vehicle.<br />

2-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!