02.07.2014 Views

GM Owner Manuals - Buick

GM Owner Manuals - Buick

GM Owner Manuals - Buick

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Replacing Restraint System Parts<br />

After a Crash<br />

{ WARNING:<br />

A crash can damage the restraint systems in your<br />

vehicle. A damaged restraint system may not<br />

properly protect the person using it, resulting in<br />

serious injury or even death in a crash. To help<br />

make sure your restraint systems are working<br />

properly after a crash, have them inspected and<br />

any necessary replacements made as soon as<br />

possible.<br />

If the vehicle has been in a crash, do you need new<br />

safety belts or LATCH system (if equipped) parts?<br />

After a very minor crash, nothing may be necessary.<br />

But the safety belt assemblies that were used during any<br />

crash may have been stressed or damaged. See your<br />

dealer/retailer to have the safety belt assemblies<br />

inspected or replaced.<br />

If the vehicle has the LATCH system and it was being<br />

used during a crash, you may need new LATCH system<br />

parts.<br />

New parts and repairs may be necessary even if the<br />

safety belt or LATCH system (if equipped), was<br />

not being used at the time of the crash.<br />

If an airbag inflates, you will need to replace airbag<br />

system parts. See the part on the airbag system earlier<br />

in this section.<br />

Have the safety belt pretensioners checked if the<br />

vehicle has been in a crash, if the airbag readiness light<br />

stays on after the vehicle is started, or while you are<br />

driving. See Airbag Readiness Light on page 4-34.<br />

2-80

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!