02.07.2014 Views

GM Owner Manuals - Buick

GM Owner Manuals - Buick

GM Owner Manuals - Buick

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Remote Vehicle Start<br />

Your vehicle may have a remote starting feature.<br />

This feature allows you to start the engine from outside<br />

the vehicle. It may also start the vehicle’s heating or air<br />

conditioning systems, rear window defogger, and heated<br />

seats. See Heated Seats on page 2-6 and Heated and<br />

Ventilated Seats on page 2-7 for additional information.<br />

When the remote start system is active, the climate<br />

control system will heat or cool the inside of the vehicle at<br />

the setting the vehicle was set to when the vehicle was<br />

last turned off. The rear window defogger will be turned<br />

on by the climate control system when it is cold outside.<br />

If the vehicle has heated seats, they may also turn on<br />

when it is cold outside. Cooled seats are not activated<br />

during a remote start. Normal operation of the system<br />

will return after the key is turned to the ON/RUN position.<br />

Laws in some communities may restrict the use of remote<br />

starters. For example, some laws may require a person<br />

using the remote start to have the vehicle in view when<br />

doing so. Check local regulations for any requirements<br />

on remote starting of vehicles.<br />

Do not use the remote start feature if your vehicle is low<br />

on fuel. Your vehicle may run out of fuel.<br />

If your vehicle has the remote start feature, the RKE<br />

transmitter functions will have an increased range<br />

of operation. However, the range may be less while<br />

the vehicle is running.<br />

There are other conditions which can affect the<br />

performance of the transmitter, see Remote Keyless<br />

Entry (RKE) System on page 3-4 for additional<br />

information.<br />

/ (Remote Start): This button will be on the RKE<br />

transmitter if you have remote start.<br />

To start the vehicle using the remote start feature:<br />

1. Aim the transmitter at the vehicle.<br />

2. Press and release the transmitter’s lock button, then<br />

immediately press and hold the transmitter’s remote<br />

start button until the turn signal lights flash or if the<br />

vehicle’s lights are not visible, press and hold the<br />

remote start button for at least four seconds.<br />

When the vehicle starts, the parking lamps will turn<br />

on and remain on while the vehicle is running.<br />

The vehicle’s doors will be locked.<br />

3. If it is the first remote start since the vehicle has<br />

been driven, repeat these steps, while the engine is<br />

still running, to extend the engine running time by<br />

10 minutes. Remote start can be extended one time.<br />

After entering the vehicle during a remote start, insert<br />

and turn the key to ON/RUN to drive the vehicle.<br />

If the vehicle is left running it will automatically shut<br />

off after 10 minutes unless a time extension has<br />

been done.<br />

3-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!