AccuFlex⢠- Boston Scientific
AccuFlex⢠- Boston Scientific
AccuFlex⢠- Boston Scientific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BLACK HOLE SMA CONNECTOR<br />
The AccuFlex Single Use Laser Fibers use<br />
the Black Hole Proximal SMA Connector. This<br />
SMA connector is designed to diffuse errant<br />
laser energy in the event that a laser console’s<br />
laser beam is not perfectly aligned as it enters<br />
the fiber. This corrective feature is designed<br />
to address a cause of fiber “burn out” in<br />
competitive laser fibers. Fiber “burn out” is a<br />
common cause of scope damage and preventing<br />
“burn out” can save costly repairs. The hermetic<br />
fiber face is designed to prevent damage to<br />
laser optics which can also be costly.<br />
Fiber Core<br />
}<br />
{<br />
Hermetic Silica Ferrule guides overfill<br />
laser energy away from fiber core<br />
{<br />
SMA 905 laser<br />
connector<br />
FLEXIBILITY, IRRIGATION<br />
& VISIBILITY<br />
LASER POLISHED OUTPUT TIP<br />
Conventional, mechanically cleaved fiber tips absorb laser energy in the tip’s imperfections,<br />
resulting in fiber “burn back” where the glass of the tip deteriorates throughout the<br />
procedure. This tip deterioration can result in loss of energy delivery of up to 30%.** The<br />
laser-polished tip of the AccuFlex Fiber is designed to offer efficient energy transmission and<br />
may reduce fiber deterioration. Because the AccuFlex Fiber is single use, every case starts<br />
with a new laser-polished tip for optimum performance.<br />
(Schematic illustration of relative<br />
proportional difference in fiber core<br />
diameters when compared to the<br />
diameter of the working channel of<br />
a flexible ureteroscope.)<br />
AccuFlex 150 Fiber Tip<br />
Competitor’s Fiber Tip<br />
AccuFlex 1000 Micron Fiber<br />
Laser-polished tip designed to<br />
reduce “burn back”<br />
Both fibers<br />
shown at<br />
25x actual<br />
diameter.<br />
Both fibers are<br />
brand new.<br />
ACMI/Dornier Brand<br />
1000 Micron Fiber<br />
All photographs taken by <strong>Boston</strong> <strong>Scientific</strong> Corporation. Bench test results may not necessarily be indicative of clinical performance.<br />
**Source: Effect of Lithotripsy on Holmium:YAG Optical Beam Profile, Lee et al, Journal of Endourology, Volume 17, Number 2, March 2003.<br />
The core size of the AccuFlex 150<br />
Fiber is 45% smaller than the core<br />
of the ACMI/Dornier Super 200<br />
Fiber. Smaller devices create less<br />
resistance to steering flexible ureteroscopes<br />
and offer better irrigation and<br />
visibility than larger devices. The<br />
AccuFlex 150 Fiber is the smallest<br />
commercially available fiber for use<br />
with Holmium lasers.