590+ Series DC Digital Converter - ssdservice.pl

6045##,QVWDOOLQJ#WKH#&RQYHUWHU
$X[LOLDU\#6XSSO\#+//#1,
Connect the control supply (single phase 50/60Hz) to
terminals L and N with suitable external fuse protection.
The steady state current absorbed by the controller is
nominal, the external fuse is determined chiefly by
considering the contactor holding VA and the controller
cooling fans.
AUXILIARY
SUPPLY
110/240VAC
1 PH 50/60Hz
MINIMUM
CONNECTION
4 REQUIREMENT
N
L
)LHOG#+)./#)0,
Connect the motor field (-) to terminal F- and field (+)
to terminal F+. If the motor has no field connections, is
a permanent magnet motor, or if the field is derived
externally, you must inhibit the FIELD ENABLE
parameter.
F- F+ PE
MINIMUM
CONNECTION
5 REQUIREMENT
+
FIELD OUTPUT
DC
0RWRU#$UPDWXUH#+$./#$0,
The motor armature is connected to busbar terminals A+ and A-.
A-
A+
MINIMUM
CONNECTION
6 REQUIREMENT
M PE +
MOTOR
ARMATURE
8