JORDAHL Channels and Accessories - Pretec
JORDAHL Channels and Accessories - Pretec
JORDAHL Channels and Accessories - Pretec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>JORDAHL</strong> ® Connection Systems<br />
Material <strong>and</strong> Identification<br />
<strong>JORDAHL</strong> ®<br />
Product<br />
Steel<br />
Stainless Steel<br />
Profile<br />
Anchor<br />
S235JR = 1.0038<br />
S275JR = 1.0044<br />
DIN EN 10025<br />
S235JR = 1.0038 DIN EN 10025<br />
EN 10263<br />
1.4301/1.4541 ( A2 ) 1)<br />
1.4401/1.4404/1.4571<br />
DIN EN 10088<br />
( A4 ) 2)<br />
1.4529/1.4547 3)<br />
1.4401/1.4404/1.4571<br />
DIN EN 10088<br />
( A4 ) 2) 1.4529/1.4547 3)<br />
Bolts strength class 4.6/8.8 DIN EN ISO 898-1 A4-50; A4-70 2) F4-70 3) DIN EN ISO 3506-1<br />
Hexagon<br />
nuts<br />
strength class 8 DIN EN 20898-2 A4-50; A4-70 2) 1.4529 3) DIN EN ISO 3506-2<br />
Washer<br />
St<br />
DIN EN ISO 7089<br />
DIN EN ISO 7093-1<br />
1)<br />
corrosion resistance class II according to Z-30.3-6 ( Not part of the national approval )<br />
2)<br />
corrosion resistance class III according to Z-30.3-6<br />
3)<br />
corrosion resistance class IV according to Z-30.3-6<br />
1.4401/1.4404/<br />
1.4571 ( A4 ) 2) DIN EN 10088<br />
Identification of <strong>JORDAHL</strong> ® Anchor <strong>Channels</strong><br />
Untersicht<br />
Identification of <strong>JORDAHL</strong> ® Bolts<br />
<strong>JORDAHL</strong> ® anchor channels are permanently<br />
identified on the profile side <strong>and</strong>/or foam filling<br />
with type of profile <strong>and</strong> material specification.<br />
JH 4.6/C<br />
<strong>JORDAHL</strong> ® bolts are embossed on the<br />
bolt head with works symbol, type<br />
<strong>and</strong> strength class.<br />
JTA K 38/17-FV<br />
38/17<br />
J8<br />
Identification of <strong>JORDAHL</strong> ® Anchor <strong>Channels</strong><br />
JTA-CE<br />
Profile Type<br />
Load Category<br />
<strong>JORDAHL</strong> ® anchor channels with round anchors are<br />
additionally embossed on the rivet head on the<br />
inside of the channel with profile designation or<br />
load class.<br />
<strong>JORDAHL</strong> ® anchor channels which are compliant<br />
with a European Technical Approval ( ETA ) show the<br />
designation “-CE”, see figure<br />
<strong>JORDAHL</strong> JTA W50/30-FV/HDG-CE<br />
50/30<br />
J8<br />
Profile Type<br />
Load Category<br />
8<br />
<strong>Channels</strong> <strong>and</strong> <strong>Accessories</strong>
Change language