Full Line 061411_Full line Brochure - Reliable Automatic Sprinkler Co.

Valves
H Deluge Riser
Assembly
DELUGE
Features:
• Incorporates a solenoid operated diaphragm type valve as the primary valve
in deluge, preaction, or special types of fire protection systems
• Easily reset by external means which eliminates the need for removing the cover
• Trim is factory assembled
Technical Bulletin: 507
Available Sizes:
1-1/2" (40mm)
A Deluge Valve
Features:
• Differential diaphragm type - simple, lightweight, dependable
• Easily trimmed for actuation by: Manual devices, Wet pilot sprinklers,
Dry pilot actuators, Solenoid valves
• Limited compression seat seal
• External hydraulic reset
• Three connection styles available: ANSI pipe threads, Grooved ends,
Metric pipe threads
• Separately replaceable diaphragm and seat seal
Technical Bulletin:
502 & 503 (O&M)
Available Sizes:
2-1/2" (65mm)
DDX Deluge
Valve
Features:
• Differential latch-type - lightweight, dependable construction
• Easily trimmed into any of nine releasing configurations
• Drop in seat & clapper assembly simplifies maintenance
• 2”, 2-1/2” and 3” have stainless steel clapper and seat assembly
• Pressure-actuated clapping facing provides dependable seal
• Reset externally. Cover removal is not required
• Grooved inlet and outlet connections
• Drain valve to drain standing water column
• Valve latches in open position. No pressure-operated relief valve is required
• Pressure rating of 250 psi (17.2 bar)
Technical Bulletin:
512, 513 (O&M), 510, 511
(O&M), 514 & 515 (O&M)
Available Sizes:
2" (50mm), 2 1/2" (65mm), 3" (80mm), 76mm, 4" (100mm), 6" (150mm), 165mm,
& 8” (200mm)
For more detailed information including approval data, please refer to the technical bulletin specified.
51