Series 7 AdjusTables FitWork™ Walkstation - Steelcase
Series 7 AdjusTables FitWork™ Walkstation - Steelcase
Series 7 AdjusTables FitWork™ Walkstation - Steelcase
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FitWork <strong>Walkstation</strong><br />
<strong>Series</strong> 7 <strong>AdjusTables</strong><br />
Installation Instructions<br />
005720D Rev D Page 6 of 20<br />
11<br />
Locate pilot holes and place one (1) console<br />
mounting bracket assembly onto underside of<br />
worksurface. Attach bracket using three (3) screws<br />
(a). Slide console next to bracket and make sure<br />
threaded studs are inserted into slot (b). Slide<br />
other console mounting bracket next to<br />
console making sure holes in bracket are<br />
lined up with pilot holes on worksurface (c).<br />
Secure bracket to worksurface using three (3)<br />
screws (d). Secure brackets to each side<br />
of console using two (2) nuts and two (2)<br />
flat washers (e).<br />
b<br />
SHOULDER<br />
WASHER<br />
CONSOLE<br />
c<br />
SHOULDER<br />
WASHER<br />
www.details-worktools.com<br />
FLAT WASHER<br />
NUT<br />
a<br />
e<br />
SCREW<br />
CONSOLE MOUNTING<br />
BRACKET ASSEMBLY<br />
d<br />
SCREW