Cutting

RODIA ® Diamond Core Drilling & Cutting
Hand-Operated and Stationary Drilling
2
RODIACUT ® 400 PRO D
Drilling system with dowel plate,
drill Ø 32 - 400 (500)* mm
Product Profile
APPLICATION AREA
2 applications in one unit:
Stationary wet drilling in (reinforced) concrete
Stationary dry drilling in masonry
KEY FEATURES
Ø 32 - 400 mm
Ø 32 - 400 mm
n Drill angle adjustments from -15° up to +45°, in 2.5° steps
adjustable
n Exchangeable guide rail
TECHNICAL DATA (DRILL STANDS)
Drilling range: w/o water collection ring: max. Ø 500 mm
optional with distance plate
Weight:
28.4 kg
Length:
460 mm
Width:
260 mm
Height:
1,100 mm
Hub:
680 mm
Ø 400
(500)
TECHNICAL DATA (DRILL MOTOR)
Drill motor:
RODIADRILL 3000 PD
Drilling range:
in concrete max. Ø 500 mm
in masonry max. Ø 500 mm
Min. distance to wall: 50 mm from drill hole centre
Min. distance to corner: 50 mm from drill hole centre
Threaded adaptor:
R 1/2" + 1.1/4" UNC
Rated input/output:
4,000 Watt / 3,000 Watt
3 speed transmission: 215 - 430 - 785 rpm
Torque:
185 - 107 - 55 Nm
Charging rate:
20.0 A
Weight:
12.1 kg
4 x roll guides
Precise and low vibration
operation, flexible use /
module concept
Sliding carriage can be used on
all RODIACUT ® PRO drill stands
and columns
Tool-less quick mounting/demounting
of drill motor on drill stand
Distance plates (No. FF35138)
To enlarge the drill hole diameter from Ø 402
to 502 mm with RODIACUT ® 400 PRO
Rubber transport wheels
Quick and easy transport on the
building site
Drill angle adjustments
Adjustable from 15° up
to +45° in 2.5° steps
46