5117 UHS brochure final - Small Bone Innovations
5117 UHS brochure final - Small Bone Innovations
5117 UHS brochure final - Small Bone Innovations
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ORDERING INFORMATION<br />
SYSTEMS, COMPLETE<br />
100-0001 Universal Hand System,complete with cases,modules,instruments,and implants<br />
601-0001 <strong>UHS</strong> Instrument & Implant Module Set complete with module<br />
case, 1.5mm, 2.0mm, 2.4mm, and K-wire modules with respective<br />
instruments, and implants<br />
601-0002 <strong>UHS</strong> General Instrument Set with respective instruments<br />
602-2001 1.5mm Implant Module Set with respective instruments, and implants<br />
602-2002 2.0mm Implant Module Set with respective instruments, and implants<br />
602-2003 2.4mm Implant Module Set with respective instruments, and implants<br />
602-2004 K-Wire Module Set with respective implants<br />
CASE AND TRAY REPLACEMENT PARTS<br />
601-1001 Storage Case Base, <strong>UHS</strong> Instrument & Implant Modules<br />
601-1002 Storage Case Lid, <strong>UHS</strong> Instrument & Implant Modules<br />
604-1010 Storage Case Tray Upper, <strong>UHS</strong> Instrument & Implant Modules<br />
604-1011 Storage Case Tray Lower, <strong>UHS</strong> Instrument & Implant Modules<br />
1.5MM IMPLANT AND INSTRUMENT MODULE<br />
602-1001 1.5mm Implant Module<br />
1.5mm Cortex Screws, self-tapping, cruciform recess, stainless steel<br />
101-1506 to 101-1514 6mm to 14mm in 1mm increments, 10 ea<br />
101-1516 to 101-1524 16mm to 24mm in 2mm increments, 10 ea<br />
1.7mm Rescue Screws, self-tapping, cruciform recess, stainless steel<br />
101-1706 6mm, 5 ea<br />
101-1708 8mm, 5 ea<br />
1.5mm Plates, stainless steel, 0.55mm thickness<br />
102-1000 Straight Plate, 6 holes, 23mm<br />
102-1001 Straight Plate, 12 holes, 47mm<br />
102-1002 T-Plate, 3 head holes, 9 shaft holes, 39mm<br />
102-1003 T-Plate, 4 head holes, 9 shaft holes, 39mm<br />
102-1004 2 x 2 hole Ladder Plate, 7 x 10mm<br />
102-1005 2 x 3 hole Ladder Plate, 7 x 17mm<br />
102-1006 2 x 4 hole Ladder Plate, 7 x 23mm<br />
102-1007 Y-Plate, 2 head holes, 9 shaft holes, 39mm<br />
Instruments, 1.5mm Module<br />
905-1007 1.1mm Drill Bit, with j-latch coupling, 80mm, 2 ea<br />
905-1008 1.5mm Drill Bit, with j-latch coupling, 80mm, 2 ea<br />
908-0001 Drill Guide for 1.1 / 1.5mm Drill Bits<br />
908-0014 1.1mm Insert Drill Sleeve for 1.5mm Drill Guide<br />
907-1001 Countersink for <strong>UHS</strong><br />
901-1003 Cruciform Screwdriver Shaft, 1.5mm Screws<br />
902-1001 Holding Sleeve for 1.5mm Screwdriver<br />
903-1001 Screwdriver Handle with j-latch<br />
909-1001 Depth Gauge<br />
914-0001 <strong>Small</strong> Screw Forceps<br />
451-2036 K-Wire Ti, Trocar Point .91mm (.036”), L 150mm<br />
451-2045 K-Wire Ti, Trocar Point 1.14mm (.045”), L 150mm<br />
2.0MM IMPLANT AND INSTRUMENT MODULE<br />
602-1002 2.0mm Implant Module<br />
2.0mm Cortex Screws, self-tapping, cruciform recess, stainless steel<br />
101-2006 to 101-2014 6mm to 14mm in 1mm increments, 10 ea<br />
101-2016 to 101-2040 16mm to 40mm in 2mm increments, 10 ea<br />
2.2mm Rescue Screws, self-tapping, cruciform recess, stainless<br />
101-2206 6mm, 5 ea<br />
101-2208 8mm, 5 ea<br />
2.0mm Plates, stainless steel, 1.0mm thickness<br />
102-2000 Straight Plate, 6 holes, 32mm, 2 ea<br />
102-2001 Straight Plate, 12 holes, 65mm, 2 ea<br />
102-2002 T-Plate, 2 head holes, 8 shaft holes, 48mm, 2 ea<br />
102-2003 T-Plate, 3 head holes, 10 shaft holes, 59mm, 2 ea<br />
102-2004 2 x 2 hole Ladder Plate, 10 x 13mm, 2 ea<br />
102-2005 2 x 2 hole Ladder Plate, 10 x 21mm, 2 ea<br />
102-2006 2 x 2 hole Ladder Plate, 10 x 30mm, 2 ea<br />
102-2007 Y-Plate, 2 head holes, 9 shaft holes, 53mm, 2 ea<br />
102-2011 Condylar Plate, Universal Flat, 26mm, 2 ea<br />
Instruments, 2.0mm Module<br />
905-1008 1.5mm Drill Bit, with j-latch coupling, 80mm, 2 ea<br />
905-1014 2.0mm Drill Bit, with j- latch coupling, 80mm, 2 ea<br />
908-0002 Universal Drill Guide 1.5 / 2.0mm<br />
908-0015 1.5 Drill Sleeve for 2.0mm Drill Guide (optional)<br />
700-0001 Condylar Plate Trial Template<br />
907-1001 Countersink for <strong>UHS</strong><br />
901-1001 Cruciform Screwdriver Shaft, 2.0mm Screws<br />
902-1002 Holding Sleeve with j-latch for 2.0/2.4mm Screws<br />
903-1001 Screwdriver Handle with j-latch<br />
909-1001 Depth Gauge<br />
914-0001 <strong>Small</strong> Screw Forceps<br />
451-2036 K-Wire Ti, Trocar Point .91mm (.036”), L 150mm<br />
451-2045 K-Wire Ti, Trocar Point 1.14mm (.045”), L 150mm<br />
2.4 MM MODULE<br />
602-1003 2.4mm Implant Module<br />
2.4mm Cortex Screws, self-tapping, 4mm head, cruciform recess, stainless steel<br />
101-2406 to 101-2414 6mm to 14mm in 1mm increments, 10 ea<br />
101-2416 to 101-2440 16mm to 40mm in 2mm increments, 10 ea<br />
2.6mm Rescue Screws, self-tapping, cruciform recess, stainless steel<br />
101-2606 6mm, 5 ea<br />
101-2608 8mm, 5 ea<br />
2.4mm Plates, stainless steel, 1.0mm thickness<br />
102-3000 Straight Plate, 6 holes, 41mm, 2 ea<br />
102-3001 Straight Plate, 12 holes, 83mm, 2 ea<br />
102-3002 T-Plate, 2 head holes, 8 shaft holes, 62mm, 2 ea<br />
102-3003 T-Plate, 3 head holes, 10 shaft holes, 76mm, 2 ea<br />
102-3007 Y-Plate, 2 head holes, 9 shaft holes, 61mm, 2 ea<br />
102-3004 2 x 2 hole Ladder Plate, 13 x 16mm, 2 ea<br />
102-3005 2 x 3 hole Ladder Plate, 13 x 26mm, 2 ea<br />
102-3006 2 x 4 hole Ladder Plate, 13 x 36mm, 2 ea<br />
102-3008 13-hole Zig-Zag Plate. 15 x 43mm, 2 ea<br />
102-3011 Straight Compression Plate, 4 hole, 28mm, 2 ea<br />
102-3012 Straight Compression Plate, 6 hole, 42mm, 2 ea<br />
102-3013 Straight Compression Plate, 8 hole, 56mm, 2 ea<br />
102-3014 Compression L-Plate, right, 2 head holes, 4 shaft holes, 35mm, 2 ea<br />
102-3015 Compression L-Plate, left, 2 head holes, 4 shaft holes, 35mm, 2 ea<br />
102-3016 Compression T-Plate, 3 head holes, 4 shaft holes, 35mm, 2 ea<br />
102-3017 Compression Y-Plate, 2 head holes, 5 shaft holes, 41mm, 2 ea<br />
Instruments, 2.4mm Module<br />
905-1011 1.8mm Drill Bit, with j-latch coupling, 80mm, 2 ea<br />
905-1015 2.4mm Drill Bit, with j-latch coupling, 80mm, 2 ea<br />
908-0004 Drill Guide Handle for 1.8/2.4mm Inserts<br />
908-0010 Neutral Drill Guide Bushing, 1.8mm<br />
908-0011 Compression Drill Guide Bushing, 1.8mm<br />
908-0012 Neutral Drill Guide Bushing, 2.4mm<br />
908-0016 1.8mm Drill Sleeve Insert for 2.4mm Drill Guide<br />
907-1001 Countersink<br />
901-1002 Cruciform Screwdriver Shaft, 2.4mm Screws<br />
902-1002 Holding Sleeve 2.0/2.4mm Screws<br />
903-1001 Screwdriver Handle with j-latch<br />
909-1001 Depth Gauge<br />
914-0001 <strong>Small</strong> Screw Forceps<br />
914-0006 Pickups<br />
451-2036 K-Wire Ti, Trocar Point .91mm (.036”), L 150mm<br />
451-2045 K-Wire Ti, Trocar Point 1.14mm (.045”), L 150mm<br />
K-WIRE MODULE<br />
602-1004 K-Wire Module<br />
Ti Single Trocar Point<br />
Ti Double Trocar Points<br />
451-2036 .91mm (.036"), L 150, blue 452-2036 .91mm (.036"), L 150, blue<br />
451-2039 1.0mm (.039"), L 150, bronze 452-2039 1.0mm (.039"), L 150, bronze<br />
451-2045 1.14mm (.045"), L 150, green 452-2045 1.14mm (.045"), L 150, green<br />
451-2049 1.25mm (.049"), L 150, magenta 452-2049 1.25mm (.049"), L 150, magenta<br />
451-2062 1.6mm (.062"), L 150, gold 452-2062 1.6mm (.062"), L 150, gold<br />
451-2079 2.0mm (.079"), L 150, purple 452-2079 2.0mm (.079"), L 150, purple<br />
Ti Fully Threaded K-Wires<br />
453-2062 1.6mm (.062"), L 150, gold<br />
453-2079 2.0mm (.079"), L 150, purple<br />
GENERAL HAND INSTRUMENT SET<br />
601-1010 Storage Case Base, <strong>UHS</strong> General Instruments<br />
601-1011 Storage Case Lid, <strong>UHS</strong> General Instruments<br />
604-1012 Storage Case Tray, <strong>UHS</strong> General Instruments<br />
604-1013 Silicone Pin Mat<br />
916-1001 Sharp Hook<br />
910-1001 Cutting Pliers<br />
911-0001 Universal Bending Pliers, small, 2 ea<br />
914-0003 Reduction Forceps, with points, broad, ratchet<br />
914-0002 Termite Forceps<br />
917-0006 <strong>Small</strong> Hohmann Retractor, 6mm width, 2 ea<br />
917-0008 <strong>Small</strong> Hohmann Retractor, 8mm width, 2 ea<br />
915-1002 Periosteal Elevator, 6mm width, curved blade, straight edge<br />
915-1001 Periosteal Elevator, 6mm width, curved blade, round edge<br />
914-0004 Reduction Forceps, with 1.14mm (.045”) K-Wire Guide<br />
903-1003 Screwdriver Handle with QC<br />
905-1001 1.1mm Drill Bit with QC, 2 ea 905-1004 2.0mm Drill Bit with QC, 2 ea<br />
905-1002 1.5mm Drill Bit with QC, 2 ea 905-1005 2.4mm Drill Bit with QC, 2 ea<br />
905-1003 1.8mm Drill Bit with QC, 2 ea<br />
US FDA regulations restrict the sale of this device to or<br />
on the order of a physician.<br />
SBi Universal Hand System and StickFIT are trademarks<br />
of <strong>Small</strong> <strong>Bone</strong> <strong>Innovations</strong>, Inc.<br />
<strong>5117</strong> 2.5M Copyright ©2006 <strong>Small</strong> <strong>Bone</strong> <strong>Innovations</strong>, Inc.<br />
All rights reserved.<br />
<strong>Small</strong> <strong>Bone</strong> <strong>Innovations</strong>, Inc.<br />
SBi Customer Service: (800) 778-8837<br />
1711 South Pennsylvania Avenue<br />
Morrisville, PA 19067<br />
Technical Support: (866) SBi-TIPS<br />
www.totalsmallbone.com<br />
SBi International, SAS,<br />
ZA les Bruyeres, BP 28<br />
01969 Peronnas, France<br />
Tel: +33 474 21 58 19<br />
MKT 30320 Rev. A 2/06