ASF Specification v2.0 DSP0136 - DMTF
ASF Specification v2.0 DSP0136 - DMTF
ASF Specification v2.0 DSP0136 - DMTF
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Alert Standard Format (<strong>ASF</strong>) <strong>Specification</strong> <strong>v2.0</strong><br />
<strong>DMTF</strong> Document <strong>DSP0136</strong><br />
Description<br />
No system memory;<br />
unrecoverable failure<br />
Unrecoverable hard-disk<br />
failure.<br />
Unrecoverable system board<br />
failure.<br />
Event Sensor<br />
Type<br />
0Fh (System<br />
Firmware Error or<br />
Progress)<br />
0Fh (System<br />
Firmware Error or<br />
Progress)<br />
0Fh (System<br />
Firmware Error or<br />
Progress)<br />
Event Offset<br />
00h (System<br />
Firmware Error)<br />
00h (System<br />
Firmware Error)<br />
00h (System<br />
Firmware Error)<br />
No bootable media. 1Eh (Boot Error) 00h (no bootable<br />
media)<br />
Hang during option ROM<br />
initialization (specified via<br />
watchdog set command)<br />
Unrecoverable multi-processor<br />
configuration mismatch<br />
0Fh (System<br />
Firmware Error or<br />
Progress)<br />
0Fh (System<br />
Firmware Error or<br />
Progress)<br />
01h (System<br />
Firmware Hang)<br />
00h (System<br />
Firmware Error)<br />
Event<br />
Data 1/2<br />
40h/02h<br />
40h/03h<br />
40h/04h<br />
40h/00h<br />
40h/08h<br />
40h/0Bh<br />
Entity<br />
32d (Memory<br />
Device)<br />
4 (Disk or Disk<br />
Bay)<br />
7 (System<br />
board)<br />
00h<br />
(Unspecified)<br />
11d (Add-in<br />
board)<br />
3 (Processor)<br />
3.1.5.3 System Firmware Progress Events<br />
This document defines a standard set of firmware progress codes that are reported in the Event<br />
Data 2 PET sub-field via Sensor Type 0Fh (System Firmware Error/Progress), Sensor-specific<br />
Offset either 01h (System Firmware Hang) or 02h (System Firmware Progress). Each descriptor<br />
is associated with a significant event within a system’s firmware bring-up sequence; the ordering<br />
of the events implies no specific sequencing.<br />
Descriptor Code<br />
00h<br />
01h<br />
02h<br />
03h<br />
04h<br />
05h<br />
06h<br />
07h<br />
08h<br />
09h<br />
0Ah<br />
0Bh<br />
0Ch<br />
0Dh<br />
0Eh<br />
0Fh<br />
10h<br />
11h<br />
12h<br />
13h<br />
14h<br />
Description<br />
Unspecified.<br />
Memory initialization.<br />
Hard-disk initialization<br />
Secondary processor(s) initialization<br />
User authentication<br />
User-initiated system setup<br />
USB resource configuration<br />
PCI resource configuration<br />
Option ROM initialization<br />
Video initialization<br />
Cache initialization<br />
SM Bus initialization<br />
Keyboard controller initialization<br />
Embedded controller/management controller initialization<br />
Docking station attachment<br />
Enabling docking station<br />
Docking station ejection<br />
Disabling docking station<br />
Calling operating system wake-up vector<br />
Starting operating system boot process, e.g. calling Int 19h<br />
Baseboard or motherboard initialization.<br />
<strong>DSP0136</strong> 23 April 2003 Page 15 of 94
Change language