AH-10 technical specifications, furniture kit, and vent system - Amaco

AH-10/AH-10SF CERAMIC KILN SPECIFICATIONS
NEMA Receptacle Plugs
6-50
Single Phase
15-50
Three Phase
Power Leads Required...........6 gauge copper wire
Voltage........................................208 or 240 Volts
Amp Rating...............................35.1 (208V Single Phase)
.......................................................22.1 (208V Three Phase)
.......................................................30.4 (240V Single Phase)
.......................................................17.6 (240V Three Phase)
Kilowatt Rating........................7.3
Power Cord................................50 amp with NEMA 6-50 or
15-50 plug for AH-10 with
Select Fire
Direct wire for AH-10 with
Infinite Switches and
Sitter/Timer
Exterior Dimensions...............37 1 /2 " W x 37 3 /4 " D x 60" H
(width includes Select Fire)
Exterior Dimensions
(door open)..............................37 1 /2 " W x 56 " D x 60" H
Firing Chamber
Dimensions...............................15 " W x 21" D x 18" H
Firing Chamber Capacity......3.28 cubic feet
Firing Speed Control..............SelectFire Computer Control
or Infinite Switches
Maximum Temperature........2381 º F, 1305 º C - Cone 10
Elements.....................................12 Kanthal High Temp. Coils
Shipping Weight......................777 lbs.
Kiln should be vented to the outside using the AMACO®
Master KilnVent and up to 60 feet of 4" diameter duct
material—galvanized furnace ducting, flexible
aluminum ducting or PVC (maximum four 90 º turns).
Kiln must be 18" from any wall. Do not place kiln on
flammable surfaces or near flammable materials.
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F

FK-3 Furniture Kit for the AH-10 KILN
n The furniture kit listed below consists of shelves and shelf supports specifically
designed for the AH-10. The kiln shelves are silicon carbide refractory and have a
maximum temperature of Cone 13 (2458°F, 1348°C).
n Shelves and shelf supports can be custom stacked for each firing to maximize
kiln space.
n Also included is a 4 lb. box of AMACO® Kiln Shelf Wash to make glaze drippings
easy to remove as well as prolonging shelf life.
Quantity
Description
8............................................................. 1" x 1" x 2" shelf supports
8 ............................................................ 1" x 1" x 6" shelf supports
8............................................................. 1" x 1" x 8" shelf supports
4............................................................. 13 3 /4" x 10 1 /8" x ½" shelves
1............................................................. 4 lb. box of AMACO® Kiln Shelf Wash
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F

MASTER KILNVENT SPECIFICATIONS
Master KilnVent
Expansion Kit
n Using patented Orton Downdraft technology, the Master KilnVent safely pulls
gasses out of the kiln, mixes them with room air, and exhausts them to the outside
through 4" ducting. In addition to making the kiln room safer, the Master KilnVent:
n Creates more uniform temperatures throughout the kiln chamber
n Circulates oxygen into the kiln which helps reds, greens, golds, and yellows to
be brighter and more vibrant
n Optional Expansion Kit allows the Master KilnVent to vent two kilns.
Technical specifications
Electrical......................................................115V, 60Hz, 1.1 amp
CFM...............................................................72
Ducting Requirements...........................Up to 60 feet of 4" duct material—galvanized
furnace ducting, flexible aluminum ducting or
PVC ducting (maximum four 90° turns)
Shipping Weight....................................... 10 lbs.
This KilnVent is designed to work with the following AMACO® kiln models:
AH-10, AH-25, AH-30, EC-55, FA-44, FA-88, HF-97, HF-101, and HF-105.
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F