EC-55 technical specifications, furniture kit, and vent ... - Amaco
EC-55 technical specifications, furniture kit, and vent ... - Amaco
EC-55 technical specifications, furniture kit, and vent ... - Amaco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>EC</strong>-<strong>55</strong>/<strong>EC</strong>-<strong>55</strong>SF CERAMIC KILN SP<strong>EC</strong>IFICATIONS<br />
NEMA Receptacle Plugs<br />
Power Leads Required........... 6 gauge copper wire<br />
Voltage........................................ 208 or 240 Volts, AC only<br />
Amp Rating............................... 28.7 (208V Single Phase)<br />
....................................................... 16.5 (208V Three Phase)<br />
....................................................... 27.1 (240V Single Phase)<br />
....................................................... 16.5 (240V Three Phase)<br />
Kilowatt Rating........................ 6.5<br />
Power Cord................................ 50 amp with NEMA 6-50<br />
or 15-50 plug for <strong>EC</strong>-<strong>55</strong><br />
with Select Fire<br />
Direct wire for <strong>EC</strong>-<strong>55</strong><br />
with Infinite Switches<br />
<strong>and</strong> Sitter/Timer<br />
Exterior Dimensions............... 41" W x 29 1 /2 " D x 32" H<br />
(width includes Select Fire)<br />
6-50<br />
Single Phase<br />
15-50<br />
Three Phase<br />
Firing Chamber<br />
Dimensions............................... 18" W x 18" D x 18" H<br />
Firing Chamber Capacity...... 3.38 cubic feet<br />
Firing Speed Control.............. SelectFire Computer<br />
Control or<br />
Infinite Switches<br />
Maximum Temperature........ 2019 º F, 1104 º C - Cone 03<br />
Elements..................................... 3 Kanthal High Temp. Coils<br />
Shipping Weight...................... 404 lbs.<br />
Kiln should be <strong>vent</strong>ed to the outside using the AMACO®<br />
Master KilnVent or KilnVent—Suspended Version <strong>and</strong><br />
up to 60 feet of 4" diameter duct material—galvanized<br />
furnace ducting, flexible aluminum ducting or<br />
PVC (maximum four 90 º turns).<br />
Kiln must be 18" from any wall. Do not place kiln on<br />
flammable surfaces or near flammable materials.<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F
FK-7 Furniture Kit<br />
for the <strong>EC</strong>-<strong>55</strong> And HF-97 KILNs<br />
n The <strong>furniture</strong> <strong>kit</strong> listed below consists of shelves <strong>and</strong> shelf supports specifically<br />
designed for the <strong>EC</strong>-<strong>55</strong> <strong>and</strong> HF-97. The kiln shelves are cordierite refractory <strong>and</strong><br />
have a maximum temperature of Cone 1 (2109°F, 1154°C).<br />
n Shelves <strong>and</strong> shelf supports can be custom stacked for each firing to maximize<br />
kiln space.<br />
n Also included is a 4 lb. box of AMACO® Kiln Shelf Wash to make glaze drippings<br />
easy to remove as well as prolonging shelf life.<br />
Quantity<br />
Description<br />
4............................................................. 1" x 1" x 6" shelf supports<br />
8 ............................................................ 1" x 1" x 8" shelf supports<br />
2............................................................. 16" x 8" x 5 /8" shelves<br />
1............................................................. 16" x 16" x 5 /8" shelf<br />
1............................................................. 4 lb. box of AMACO® Kiln Shelf Wash<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F
Suspended KILNVENT SP<strong>EC</strong>IFICATIONS<br />
n Using patented Orton Downdraft technology, the Suspended KilnVent safely<br />
pulls gasses out of the kiln, mixes them with room air, <strong>and</strong> exhausts them to the<br />
outside through 4" ducting. In addition to making the kiln room safer, the<br />
Suspended KilnVent:<br />
n Creates more uniform temperatures throughout the kiln chamber<br />
n Circulates oxygen into the kiln which helps reds, greens, golds, <strong>and</strong> yellows to<br />
be brighter <strong>and</strong> more vibrant<br />
Technical <strong>specifications</strong><br />
Electrical......................................................115V, 60Hz, 1.1 amp<br />
CFM...............................................................77<br />
Ducting Requirements...........................Up to 60 feet of 4" duct material—galvanized<br />
furnace ducting, flexible aluminum ducting or<br />
PVC ducting (maximum four 90° turns)<br />
Dimensions................................................52" x 36" x 9" H, (left <strong>and</strong> right sections combined)<br />
Shipping Weight....................................... 16 lbs.<br />
The Suspended KilnVent is designed to work with the following AMACO® kiln models:<br />
<strong>EC</strong>-<strong>55</strong>, HF-97, HF-101, <strong>and</strong> HF-105.<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F
MASTER KILNVENT SP<strong>EC</strong>IFICATIONS<br />
MASTER KILNVENT<br />
EXPANSION KIT<br />
Using patented Orton Downdraft technology, the Master KilnVent safely pulls<br />
gasses out of the kiln, mixes them with room air, <strong>and</strong> exhausts them to the outside<br />
through 4" ducting. In addition to making the kiln room safer, the Master KilnVent:<br />
Creates more uniform temperatures throughout the kiln chamber<br />
Circulates oxygen into the kiln which helps reds, greens, golds, <strong>and</strong> yellows to<br />
be brighter <strong>and</strong> more vibrant<br />
Optional Expansion Kit allows the Master KilnVent to <strong>vent</strong> two kilns.<br />
T<strong>EC</strong>HNICAL SP<strong>EC</strong>IFICATIONS<br />
Electrical .....................................................115V, 60Hz, 1.1 amp<br />
CFM ...............................................................72<br />
Ducting Requirements .......................... Up to 60 feet of 4" duct material—galvanized<br />
furnace ducting, flexible aluminum ducting or<br />
PVC ducting (maximum four 90° turns)<br />
Shipping Weight ...................................... 10 lbs.<br />
This KilnVent is designed to work with the following AMACO® kiln models:<br />
AH-10, AH-25, AH-30, <strong>EC</strong>-<strong>55</strong>, FA-44, FA-88, HF-97, HF-101, HF-105, <strong>and</strong> EX-1850SF<br />
(with Expansion Kit).<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F