AdjustAble PedestAl stAnd - Harbor Freight Tools
AdjustAble PedestAl stAnd - Harbor Freight Tools
AdjustAble PedestAl stAnd - Harbor Freight Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Unpacking<br />
When unpacking, check to make sure that the item is intact and undamaged. If any<br />
parts are missing or broken, please call <strong>Harbor</strong> <strong>Freight</strong> <strong>Tools</strong> at the number shown on the<br />
cover of this manual as soon as possible.<br />
Assembly Instructions<br />
Note: For additional information regarding the parts listed in the following pages, refer to<br />
the Assembly Diagram below.<br />
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
Be sure to securely mount the Pedestal Stand to a floor or cement surface<br />
that is capable of supporting the weight of the Pedestal Stand, and the tool attached<br />
to it. Using the mounting holes in the Bottom Plate (1), use proper mounting<br />
hardware (not provided) to secure the Pedestal Stand. The diameter of the holes in<br />
the Bottom Plate are .590”.<br />
Once the Adjustable Pedestal Stand is mounted securely, place the Pipe (8) into the<br />
Center Pole (2). See Figure 1.<br />
Choose the correct height for your working surface. Match up the holes in the Pole<br />
and Pipe and insert the locking Pin (5).<br />
To readjust, pull out the Pin (5) and pull up or push down to the next hole. Line up<br />
the holes and insert the Pin (5).<br />
Mount the tool to be used to the Top Plate (6).<br />
Top Plate Slots (6)<br />
Pipe (8)<br />
3/8” Bolt (3)<br />
Height Adjustment Holes (7)<br />
Chain w/Riing (4)<br />
Locking Pin (5)<br />
Center Pole (2)<br />
Holes, .590” Dia.<br />
Bottom Plate (1)<br />
Figure 1<br />
SKU 95357 For technical questions, please call 1-800-444-3353.<br />
Page