90 AMP FLUX WIRE WELdER - Harbor Freight Tools
90 AMP FLUX WIRE WELdER - Harbor Freight Tools
90 AMP FLUX WIRE WELdER - Harbor Freight Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Safety Setup Basic Welding Welding Tips Service<br />
Save This Manual<br />
Keep this manual for the safety warnings<br />
and precautions, assembly, operating,<br />
inspection, maintenance and cleaning<br />
procedures. Write the product’s serial number<br />
in the back of the manual near the assembly<br />
diagram (or month and year of purchase if<br />
product has no number). Keep this manual<br />
and the receipt in a safe and dry place for<br />
future reference.<br />
Important SAFETY<br />
Information<br />
In this manual, on the labeling, and<br />
all other information provided with<br />
this product:<br />
This is the safety alert<br />
symbol. It is used to alert<br />
you to potential personal<br />
injury hazards. Obey all<br />
safety messages that follow<br />
this symbol to avoid possible<br />
injury or death.<br />
DANGER indicates a<br />
hazardous situation<br />
which, if not avoided, will result<br />
in death or serious injury.<br />
WARNING indicates a<br />
hazardous situation<br />
which, if not avoided, could<br />
result in death or serious injury.<br />
CAUTION, used with<br />
the safety alert<br />
symbol, indicates a hazardous<br />
situation which, if not avoided,<br />
could result in minor or moderate<br />
injury.<br />
1.<br />
2.<br />
NOTICE is used to<br />
address practices not<br />
related to personal injury.<br />
CAUTION, without the<br />
safety alert symbol, is<br />
used to address practices not<br />
related to personal injury.<br />
General Safety Warnings<br />
WARNING Read all safety warnings<br />
and instructions. Failure to follow the<br />
warnings and instructions may result<br />
in electric shock, fire and/or serious<br />
injury.<br />
Save all warnings and instructions<br />
for future reference.<br />
Work area safety<br />
a. Keep work area clean and well lit.<br />
Cluttered or dark areas invite accidents.<br />
b. Do not operate welders in explosive<br />
atmospheres, such as in the presence<br />
of flammable liquids, gases or dust.<br />
Welders create sparks which may ignite<br />
the dust or fumes.<br />
c. Keep children and bystanders away<br />
while operating a welder. Distractions<br />
can cause you to lose control.<br />
Electrical safety<br />
a. Welder plugs must match the outlet.<br />
Never modify the plug in any way.<br />
Do not use any adapter plugs with<br />
grounded welders. Unmodified plugs<br />
and matching outlets will reduce risk of<br />
electric shock.<br />
b. Avoid body contact with grounded<br />
surfaces such as pipes, radiators,<br />
ranges and refrigerators. There is an<br />
increased risk of electric shock if your<br />
body is grounded.<br />
c. Do not expose welders to rain or wet<br />
conditions. Water entering a welder will<br />
increase the risk of electric shock.<br />
Page 2 For technical questions, please call 1-800-444-3353. SKU 98871
Change language