KAV–3250 - Dr Hi-Fi House Calls

KAV–2250
Stereo Power Amplifier
KAV–3250
Three-channel Power Amplifier
Instructions for Use
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com
v 01.2
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive (73/23/EEC).
WARNINGS
The amplifier must be placed on a firm, level surface where it is not exposed to dripping or splashing.
The ventilation grids on the top and bottom of the amplifier must be unobstructed at all times during operation.
Do not place flammable material above or beneath the amplifier.
Contact your authorized Krell dealer, distributor, or Krell before using any devices designed to alter or stabilize
the AC power for the KAV–2250 and the KAV–3250.
Before connecting the KAV–2250 and the KAV–3250, make sure the amplifier is turned off and any output
device (such as a preamplifier) is in mute or stand-by mode. Make sure all cable terminations are of the
highest quality and free from frayed ends, short circuits, or cold solder joints.
Use only one input to each amplifier channel at a time.
Make sure that only one switch on an input switch bank is in the up (on) position at one time.
THERE ARE NO USER SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized Krell dealer, distributor, or Krell if you have any questions not addressed in
this reference manual.
This product is manufactured in the United States of America. Krell ® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell
Industries, Inc., its subsidiaries, and authorized agents. Multi Amp Throughput and Krell Current Mode are trademarks of Krell Industries, Inc. All other
trademarks and tradenames are registered to their respective companies.
© 2001 by Krell Industries, Inc. All rights reserved P/N 305573