KAVâ3250 - Dr Hi-Fi House Calls
KAVâ3250 - Dr Hi-Fi House Calls
KAVâ3250 - Dr Hi-Fi House Calls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Placement<br />
Before you integrate your new amplifier into your system, please review the following<br />
guidelines to choose the location for the component. This will facilitate a clean, troublefree<br />
installation.<br />
The amplifier requires at least two inches (5 cm) of clearance on each side and at least<br />
two inches (5 cm) of clearance above and below the component to provide adequate<br />
ventilation.<br />
The amplifier does not require any type of special rack or cabinet for installation. For the<br />
dimensions of your amplifier see Specifications, on pages 26 and 27.<br />
Place the amplifier as close to the loudspeakers as possible and keep the loudspeaker<br />
cable length to a minimum. Loudspeaker cable adds impedance to the load the amplifier<br />
must drive, regardless of the cable’s gauge. Krell amplifiers drive the lowest<br />
impedances with ease, but long loudspeaker cables reduce the maximum power that is<br />
delivered to the loudspeakers.<br />
AC POWER GUIDELINES<br />
Krell recommends operating the amplifier from a dedicated 15-amp AC power line.<br />
Please contact your authorized Krell dealer, distributor, or Krell before using any<br />
devices designed to alter or stabilize the AC power for the KAV–2250 and KAV–3250.<br />
`<br />
Power Cord<br />
The KAV–2250 and KAV–3250 should be operated only with the power cord supplied.<br />
Krell KAV–2250 and KAV–3250 5
Change language