Owners manual 2005.qxp - MR Hifi
Owners manual 2005.qxp - MR Hifi
Owners manual 2005.qxp - MR Hifi
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Densen B-350<br />
Mono block power amplifier<br />
The B-350 is the culmination of years of research here at<br />
Densen.The B-350 has for several years been the internal reference,<br />
and therefore it is a pleasure to be able to show audiophiles<br />
all over the world the true<br />
musical world of Densen.<br />
Made without any<br />
compromises at all,<br />
the B-350 contains<br />
some outstanding features<br />
and qualities, and represents<br />
the state-of-the-art in amplifier<br />
technology.The power output is 125W in 8 ohm, and 250W in 4<br />
ohm, with the first 40Watt in true class A.With a 750VA transformer<br />
and a storage capacity of 100.000uF and 4 separate<br />
power supplies, the B-350 presents a forceful and refined<br />
sound, no matter what speaker you<br />
connect. Like all Densen<br />
power amplifiers, it has<br />
a lot of features, but<br />
the main issue is the<br />
sound, which simply must<br />
be heard to be believed.<br />
Back panel connections:<br />
a: Speaker terminal. The amplifier is prepared for one<br />
speaker. Red must be connected to red/+ on your<br />
speaker, and black to black/- on your speaker.<br />
b: Input: The B-350 has an internal socket for an electronic<br />
crossover, to facilitate active systems. When<br />
an electronic crossover is used, the preamp must be<br />
connected to RED(upper) input. For use without the<br />
electronic crossover connect to WHITE (lower) input<br />
(from preamp).<br />
c: Gain select will adjust the amplifier to fit to either<br />
passive or active pre amplifer. When using the B-350<br />
with a passive preamplifier or with a CD player with<br />
variable volume (and using no preamp) the gain<br />
must be set to: high.<br />
d: Link connection for Densen products with link.<br />
Allows the components to communicate with each<br />
other and also allows for multiroom applications.<br />
e: Main input. Only power the amplifier with the<br />
mains voltage indicated on the sticker on the back<br />
panel. The mains input also contains a socket for<br />
fuses, which must only be replaced with same type of<br />
fuse as indicated on the sticker on the back panel.<br />
f: Power on/off switch.<br />
Front panel:<br />
g: Red light indicating the amplifier is on.<br />
30