Owners manual 2005.qxp - MR Hifi

DP-Drive/01c/03/04/06
MM/MC Phono stages
The DP-03 is the successor to the DP-01 MM stage. It is a giant
step forward in sound and technology,and despite its modest
price, it will offer you a world class riaa when mounted in any
Densen amplifier. Due to the technical
design, the DP-03 works
with all MM cartridges
on the market, and
actually does this with
an outstanding sound
quality. The DP-03 fits in all the
Densen products ever made. The new
DP-04 and DP-06 are based on the very popular DP- 02MC
stage. In these new designs, it has been redesigned and
improved, with even better sound circuits, and LED's instead
of the DP-02s light bulbs, in the advanced light driven power
supply, which secures an extremely
clean power for the delicate
circuits to give an extremely
noise free and
musical performance
from any MC or MM cartridges.
The DP-Drive works as
a docking station for phonostages if you
do not have Densen pre amp or integrated amp.
Back panel connections:
a: Ground connector.
b: Phono in: The turntable is connected to this input.
c: Pre out: This is connected to a line input of the preamp
or integrated amplifier with which the DP-Drive
is used.
d: The DP-Drive comes complete with an external
power supply. This power supply is connected to this
input.
e: Power: On/Off: switch. Please set the switch to off,
when the DP-Drive is equipped with a DP-02, and the
DP-Drive is not in use.
Front:
f: Power indicator: light is red when the power is on.
DP-01c MM is for use with DP-Drive/B-200/B-100
DP-03 MM is for use inside B-250/B-150/B-130/B-
110
DP-04 MM+MC is for use with DP-Drive/B-200/B-
100
DP-06 MM+MC is for use inside B-250/B-150/B-
130/B-110
38