Husqvarna - AR19 - JW Hire & Sales Ltd
Husqvarna - AR19 - JW Hire & Sales Ltd
Husqvarna - AR19 - JW Hire & Sales Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MAINTENANCE<br />
Cam lock for the handle<br />
Only applies to model <strong>AR19</strong>.<br />
1. The cam lock (3) on the handle should lock if<br />
you press it with moderate force using your<br />
hand. The frame of handle (2) should be properly<br />
affixed to the machine.<br />
2. Check the locking nut on the cam rod (1). If the<br />
nut is easy to turn by hand when the cam is<br />
released, it will no longer properly affix the<br />
handle and must be replaced for the lock to<br />
continue functioning safely.<br />
Adjustment<br />
Put the handle in working position and slowly tighten<br />
the locking nuts on the cam rod (1/4 turn at a time)<br />
until the cam lock functions with moderate manual<br />
pressure.<br />
IMPORTANT INFORMATION<br />
Excessive adjustment of the locking nut can<br />
damage the cam rod. Always replace nuts that<br />
become easy to turn so that the handle does<br />
not come loose. For the cam mechanism to<br />
operate easily, the edge of the cam should be<br />
lubricated with a small amount of grease.<br />
8011-120<br />
English – 31
Change language