Outline installation & maintenance instructions

PROGRAMMING THE THERMOSTAT
COPYING A DAY OR A PROGRAMME
To copy the schedule for a given day to another day:
When in the Auto mode:
Press a day button to to go into
programming mode.
1- Press and hold down the button for the day
from which you want to copy a schedule
(e.g. Monday ). The word COPY will appear
onscreen after three seconds. Keep holding
the button down.
2- Press the day button for the day to which
you want to copy a schedule, (e.g. Tuesday ). The word COPY will flash,
meaning that the schedule has been copied. In the example we used, the
schedule for monday would have been copied to tuesday.
Similarly, you can copy a full weekly programme (i.e. all seven days) to another
weekly programme.
To copy a full weekly programme to another weekly programme:
When in the Auto mode:
Press a programme button to to go into
programming mode.
1- Press and hold down the button for the
programme from which you want to copy a
schedule (e.g. ). The word COPY will appear
onscreen after three seconds. Keep holding the
button down.
2- Press the programme button for the
programme to which you want to copy a
schedule, (e.g. ). The word COPY will flash,
meaning that the schedule has been copied.
In the example we used, the schedule for programme 1 would have been
copied to programme 2.
9