Aphex_188_User_Manual - Pro Audio Galicia

More documents

Recommendations

Info

188 Quick Start Rotary Encoder and Switch Rotate the encoder clockwise or counterclockwise to scroll between screens. Press the encoder to make the cursor appear within a screen. Rotate the encoder to move the cursor to the value or status to be changed and press to select, the cursor will start blinking. Rotate the encoder to change the value or status. Press the encoder to save the value or status. Start Up The first screen shows the firmware version that is loaded into the Model 188. It is a good idea to check the Aphex website occasionally to see if there are any updates. Updating the firmware is covered in section---- Aphex Systems Ltd. Model 188 Page 5
188 Metering This screen shows a twelve segment peak level meter for each channel. When there is an overload the clip on that channel is indicated with a “!”. When the unit receives a command from a remote controller, “RC” will light for half a second. We recommend that this screen be selected when set up is complete. Channel Status and Input Gain There is one screen for each of the eight channels. Each screen indicates Channel number, gain, status for Polarity Reverse, Pad, Low Cut Filter, and Phantom Power functions. A check mark under the function indicates that it is active. A dash indicates that it is not active. The Input Gain is adjustable from 26 to 65dB. Aphex Systems Ltd. Model 188 Page 6
Page 1 and 2: Model 188
Page 3 and 4: 188 A MESSAGE FROM THE PRESIDENT De
Page 5: Introduction 188 Why remote control
Page 9 and 10: 188 Contrast Adjust Press encoder i
Page 11 and 12: 188 SYNC Standard BNC connectors wi
Page 13 and 14: 188 Installation 3.1 UNPACKING AND
Page 15 and 16: 188 3.10 INSTALLING NEW FIRMWARE IN
Page 17 and 18: 4. Functions in Detail 188 Channel
Page 19 and 20: 7. Warranty & Service 188 7.1 Limit

Aphex_188_User_Manual - Pro Audio Galicia

Create successful ePaper yourself

Delete template?

Save as template?