Data Sheet Temperature sensor sets Pt 100 / Pt 500, 2-wire

Data Sheet
Temperature sensor sets
Pt 100 / Pt 500, 2-wire
Instrumentation
SONOCAL ® ultrasonic heat meter
Application
The temperature sensor set is designed for use with the
Danfoss energy calculator type INFOCAL 5 for measurement of
the energy consumption in a district heating net.
To ensure an accurate measurement of the temperature
difference according to EN 1434, the sensors are delivered as
matched pairs.
The sensor set can be supplied with type approval marking
according to local demands. Before order/delivery Danfoss
must therefore be in possesion of the necessary local
approvals for each of the sensor lengths for each country. The
sensor set can also be supplied with first time verification* with/
without certificate.
* Country dependent, if Danfoss is in possession of local approvals.
Sensor sets can always be delivered without any approvals for multiple-purpose applications.
Ordering
A BBBC - DD EF G HKLMM NN P
Ordering key J- 0 0 0 0 - 0 0 XX X -00000 XX X
Sensor type / length
Pt 500, short direct sensor, 1.5 m cable (type DS) ..........................................
Pt 500, short direct sensor, 3.0 m cable (type DS) ..........................................
Pt 500, 6 mm pocket sensor, 1.5 m cable (type PS) .........................................
Pt 500, 6 mm pocket sensor, 3.0 m cable (type PS) .........................................
Pt 500, 6 mm pocket sensor, 5.0 m cable (type PS) .........................................
Pt 500, 6 mm pocket sensor, 10.0 m cable (type PS) .......................................
Pt 500, 6 mm pocket sensor, 20.0 m cable (type PS) .......................................
Pt 100, 6 mm pocket sensor, 1.5 m cable (type PS) .........................................
Pt 100, 6 mm pocket sensor, 3.0 m cable (type PS) .........................................
1A
1B
1C
1D
1E
1F
1G
2H
2J
Sensor pocket/ball valve (pair)
None ........................................................................................................................ 0
Brass, 40 mm .......................................................................................................... A
Brass, 85 mm .......................................................................................................... B
Brass, 120 mm ........................................................................................................ C
Stainless steel, 85 mm ............................................................................................ K
Stainless steel, 120 mm .......................................................................................... L
Stainless steel, 155 mm .......................................................................................... M
Stainless steel, 210 mm .......................................................................................... N
Adapter nipple ½" x M10 ......................................................................................... V
Ball valve DN 15 ...................................................................................................... S
Ball valve DN 20 ...................................................................................................... T
Ball valve DN 25 ...................................................................................................... U
Country code
DK, SE, FI, DE, PL, AT, CZ ..........................................................................................................
Verification / documentation
Without approval marking ....................................................................................................................... 0
With approval marking ............................................................................................................................ 1
With approval marking and first verification ........................................................................................... 2
With approval marking, first verification and certificate ......................................................................... 3
521H1030 - DKIN.PK.022.A2.02

Data Sheet
Temperature sensor set PT 100/Pt 500, 2-wire
Ordering
Sensor pockets/adapter
40 mm 85 mm 120 mm 155 mm 210 mm
Brass (2 pcs.) 087H0104 087H0105 087H0106
Stainless steel (2 pcs.) 087H0100 087H0101 087H0102 087H0103
Adapter for direct sensor
R½” x M10 mm (1 pc.)
087H0107
Ball valves with integrated
temperature sensor
pocket
Type
DN 15
DN 20
DN 25
Code No.
087Z0169 (12 pcs.)
087Z0170 (12 pcs.)
087Z0171 (8 pcs.)
Technical data
Temperature sensor
Direct mounted
Pocket sensor
Type DS (EN 1434) Type PS (EN 1434)
Element Pt 100/500, 2-wire (EN 60751) Pt 500, 2-wire (EN 60751)
Pairing 10 °C, 80 °C, 130 °C
Media temperature 0...180 °C 0...150 °C
Response time τ 0,5 Typically 0.8 sec./0.4 m/sec. See spec. sensor pocket
Medium
District heating water
Pressure rating PN 16 See spec. sensor pocket
Protection IP 67 IP 65
Pipe material W-No. 2.4816 (uns -n06600) W-No. 1.4303 (AISI 304 Ti)
Dimension ø 5,4/3,3 mm ø 6 mm
Sensor length 27,5 mm 50 mm
Sensor pockets/ adapter
nipple
Brass
Stainless steel
Media temperature 0 - 180 °C
Medium
District heating water
Response time τ 0.5 Typically 9 sec./0.4 m/sec. Typically 13 sec./0.4 m/sec.
Typically 5 sec./0.4 m/sec.
Typically 5 sec./0.4 m/sec.
with pasta
with pasta
Pressure rating PN 25
Length L 1 (mm) 47 82 117 98 133 168 223
L (mm) 40 85 120 85 120 155 210
Material CUZN 40 Pb2 (Ms 58) W-no. 1.4571
Adapter nipple CUZN 40 Pb2 (Ms 58)
Ball valves with integrated
temperature sensor
pocket
Temperature range 0 - 150 °C
Temperature sensor Can be replaced with pipe system under pressure
Compliance The temperature sensor complies with EN 1434
Temperature sensor
pocket
No demand for temperature sensor pocket
Wetted parts
Valve housing
Brass 58, nickel-plated
Ball valve
Brass 58, chromium-plated
Ball gasket
PTFE
O-rings
EPDM
2 DKIN.PK.022.A2.02

Data Sheet
Temperature sensor set PT 100/Pt 500, 2-wire
Dimensions
Direct sensor, type DS
Adapter nipple
Ø 6 mm pocket sensor, type PS
Sensor pocket, stainless steel
Ball valve
Sensor pocket, brass
DN H H L Rp
15 29 77 64 1 / 2 "
20 29 77 73 3/ 4 "
25 34 84 85,5 1"
Sealing
DKIN.PK.022.A2.02
3

The Danfoss instrumentation range contains:
MAGFLO ® electromagnetic flowmeters
MAGFLO ® flowmeters are used for all electrically conductive
liquids.
A wide range is offered for:
• The water treatment sector – enclosures are IP 67 as standard.
• The chemical industry – Ex-approved and other versions
available.
• The food industry – stainless steel and other versions available.
SONOFLO ® ultrasonic flowmeters
SONOFLO ® flowmeters measure flow in full pipes.
SONOFLO ® flowmeters measure media in liquid form, irrespec-tive
of electrical conductivity.
The range includes a one- to four-track flowmeter, SONO 3000. The
meter is also available in a compact Ex-version.
SONOFLO ® flowmeters can also be installed on existing pipes,
providing low cost installations, especially where large pipes are
concerned.
MASSFLO ® mass flowmeters
MASSFLO ® flowmeters measure flow direct in kg/h. In addition,
MASSFLO ® flowmeters measure:
• Density
• Temperature
• Sugar concentration i.e. °Brix
MASSFLO ® flowmeters are available in stainless steel, Hastelloy
and with integrated heating.
MASSFLO ® flowmeters can be obtained in an intrinsically safe
version for explosive areas.
MASSFLO ® , MAGFLO ® , SONOFLO ® , SONOCAL ® and SENSORPROM ® are registered Danfoss trademarks.
521H1030
DKIN.PK.022.A2.02
© Danfoss A/S (IN-MH/KN/BS&IN-MSP&MFC-/SSS/VRI) 10.2000 P65