Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Remote Programming Software<br />
mProRemote/TM-COM<br />
TM-COM Network overview screen lists all mPro400GC-E<br />
and mPro400GC-I controllers connected to the network.<br />
mProRemote for mPro400GC-M and mPro400GC-P<br />
controllers.<br />
Remote Programming Software<br />
Cleco’s remote programming software delivers ultimate control<br />
to the user, empowering them to control the production<br />
process remotely through programming that is easy to use<br />
and intuitive. Anything that can be programmed locally on the<br />
controller can also be performed from a remote location using<br />
the exact same screens.<br />
Using this software to monitor, modify, and/or manage the<br />
production line will increase your efficiency and productivity.<br />
Centralized management of the tightening process assures<br />
quality products.<br />
TM-COM (for GC-E/GC-I controllers) can communicate using<br />
either a RS232 or TCP/IP connection.<br />
mProRemote (for GC-M/GC-P controllers)<br />
utilizes a TCP/IP connection only.<br />
Software<br />
Part Number<br />
mProRemote<br />
TM-COM<br />
Description<br />
Provided with each mPro400GC-M & mPro400GC-P<br />
Provided with each mPro400GC-E & mPro400GC-I<br />
All menus in all controllers are accessible from the<br />
Navigator screen.<br />
mProRemote & TM-COM Minimum System Requirements<br />
Operating System: Windows 2000, NT or XP<br />
Processor: Pentium<br />
Memory: 256MB<br />
Free Disk Space: 10MB per controller<br />
119