Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
<strong>Tool</strong> & Cable Tester<br />
Part No. Description<br />
961024<br />
<strong>Tool</strong> & cable tester<br />
tool memory programming<br />
542991 <strong>Tool</strong> & cable tester<br />
Note: Adapter cable required for Air-Lb tools. Contact Tech Service.<br />
Lever Extension Kits<br />
Description<br />
Part No.<br />
Lever Extension Kit (non-swivel) 541757<br />
Lever Extension Kit (swivel) 543414<br />
Note: Models for standard tool cable (non-swivel) and swivel cable.<br />
Suspension Bail<br />
Description<br />
Part No.<br />
<strong>Tool</strong> suspension bail 1110909<br />
Joint Simulator<br />
Joint simulators are most frequently used to certify the<br />
repeatability of nutrunners before being installed on a production<br />
line and are also an excellent means of testing nutrunners<br />
following repair.<br />
The Joint Simulator can simulate and test the torque output of<br />
nutrunners on both hard and soft joints. Each Joint Simulator<br />
is supplied with a quantity of spring washers which are used to<br />
test tool accuracy. Torque per revolution is varied by stacking the<br />
spring washers in different combinations.<br />
Electronic torque testing is<br />
accomplished by attaching<br />
an external rotary transducer<br />
between the tool’s square drive<br />
and the socket.<br />
■ Easy access, load, set-up<br />
and maintenance.<br />
■ Heavy-duty and economical.<br />
■ Adjustable torque reaction<br />
bracket can accommodate<br />
virtually any tool.<br />
■ For use with reversible/<br />
non-reversible tools.<br />
Test Fixture<br />
Part Number<br />
536185<br />
Medium to Hard Torque<br />
Belleville Washer Test Fixture is clamped in a vise<br />
and used to test tools (10 In. Lbs. – 100 Ft. Lbs.,<br />
1.13Nm – 135.6Nm). Washers can be rearranged<br />
to simulate “hard” or “soft” joints.<br />
3/4” Hex<br />
100 Ft.Lbs.<br />
Max. 1/2” Hex<br />
25 Ft.Lbs.<br />
Max.<br />
Torque Range Width Height Length<br />
Part No.<br />
Ft. Lbs. Nm in. mm in. mm in. mm<br />
550006 12-220 15-300 10.4 264 16 406 26.5 667<br />
Double Joint Simulators/Test Fixture<br />
• Separate simulator for soft and hard joint<br />
• Inclusive mounting plate<br />
Part Number<br />
W09164K<br />
W08780K<br />
W08779K<br />
Description<br />
5 Nm hard joint/15 Nm soft joint<br />
10 Nm hard joint/35 Nm soft joint<br />
20 Nm hard joint/55 Nm soft joint<br />
W08779K<br />
125