Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Electric Nutrunners â Corded Transducer Control - Apex Tool Group ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Electric</strong> <strong>Nutrunners</strong> – <strong>Corded</strong> <strong>Transducer</strong> <strong>Control</strong><br />
Inline Non-Floating Spindle <strong>Tool</strong>s<br />
Inline Non-Floating Series<br />
Torque Range Bolt Size<br />
13 - 4050 Nm M10 - M42<br />
10 - 2985 Ft. Lbs. 7/16” - 1 3/4”<br />
■ Brushless precision<br />
■ Resolver control<br />
■ <strong>Transducer</strong> control<br />
■ Memory intelligence<br />
All 67 Series <strong>Tool</strong>s require an isolation<br />
transformer (544185PT) for use with Cleco<br />
Global <strong>Control</strong>ler.<br />
Isolation<br />
Transformer<br />
544185PT<br />
Incoming<br />
Power<br />
115/230VAC<br />
Matrix <strong>Tool</strong><br />
Cable<br />
542778-XM<br />
Power<br />
Cable<br />
Air-Lb Cable<br />
Cleco 67 Series <strong>Tool</strong><br />
XX E S XXXX XXX X<br />
67ES135D4<br />
Motor<br />
67<br />
<strong>Tool</strong> Style<br />
S – Inline<br />
Power<br />
E-<strong>Electric</strong><br />
Max Output Torque (Nm)<br />
Under 60 Nm, rounded up to the nearest 1 Nm.<br />
Over 60 Nm, rounded to the nearest 5 Nm.<br />
Retainer<br />
- Pin retainer<br />
B Ball retainer<br />
Output Drive<br />
D4 – 1/2” Sq.Dr. D8 – 1” Sq.Dr.<br />
D6 – 3/4” Sq.Dr. D12 – 1 1/2” Sq.Dr.<br />
Inline Non-Floating<br />
Torque Range<br />
Max.<br />
Speed<br />
Weight*<br />
Output<br />
Drive<br />
Length<br />
Side to Center<br />
Model Number ft. lbs. Nm RPM lbs. kg Size in. mm in. mm<br />
67ES65D4 10-47 13-64 535 10.3 4.7 1/2” 21.0 533 1.31 33<br />
67ES105D4 15-77 21-104 330 10.3 4.7 1/2” 21.0 533 1.31 33<br />
67ES135D4 20-100 27-135 245 10.3 4.7 1/2” 21.0 533 1.31 33<br />
67ES190D6 28-140 38-190 165 11.6 5.3 3/4” 20.5 521 1.31 33<br />
67ES285D6 42-210 57-285 115 11.6 5.3 3/4” 20.5 521 1.31 33<br />
67ES385D6 57-285 77-386 83 11.6 5.3 3/4” 20.5 521 1.31 33<br />
67ES475D6 70-350 95-475 67 12.0 5.4 3/4” 20.9 531 1.31 33<br />
67ES610D6 90-450 122-610 50 12.0 5.4 3/4” 20.9 531 1.31 33<br />
67ES850D8 125-625 170-848 33 17.0 7.7 1” 23.8 605 1.50 38<br />
67ES1050D8 155-775 210-1050 27 17.0 7.7 1” 23.8 605 1.50 38<br />
67ES1670D8 246-1230 334-1668 17 17.0 7.7 1” 23.8 605 1.50 38<br />
67ES2060D8 304-1520 412-2060 14 17.0 7.7 1” 23.8 605 1.50 38<br />
67ES4050D12 597-2985 810-4050 6 45.2 20.5 1 1/2” 24.5 622 2.35 60<br />
*Weights are without tool cable or reaction bar if so equipped.<br />
Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco<br />
Global <strong>Control</strong>ler.<br />
General: All tools must be used with an approved ATG cable and controller.<br />
Standard Equipment: Matrix Connector; Reaction bar; Slave drive reaction bar<br />
on 67ES4050D12.<br />
Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX,<br />
Inline swivel cable 544056-XX, Extension cable 542779-XX.<br />
Additional Accessories: See pages 121-129 for additional accessories.<br />
35