Element II - Area Brochure - Visionaire Lighting, LLC

Meet Element 2.0
Upon it’s introduction to the market a little over three years ago; the Element, Visionaire Lighting’s flagship LED fixture,
simply took off.Now, after hundreds of Element projects have been installed around the globe, we’re taking our bestselling
LED luminaire and making it even better.
What’s New?
The Element II’s quality is visually apparent as soon as it is table‐topped alongside a competitor’s fixture.
Enhanced areas include:
• Aluminum end caps, which are die cast for strength; and enhanced with design elements for a pleasingly
sophisticated look.
• Additional, advanced optics that leap ahead of the competition; giving the Element II the leading edge in nearly every
desired application.
• More housing sizes for increased scale-ability.
• Two new low-profile end mount arms designed to enhance the beauty of the Element II while adding function for
higher lumen lighting applications.
Visionaire Lighting’s Evolution C
Technology Is All About Performance
The Element II incorporates the flexible Vision bar
technology which allows for LED fixture selection
from 24 LEDs all the way to 288 LEDs in 24 LED
increments
We at Visionaire Lighting have pioneered the highest
benchmark for Solid State Lighting (SSL) technology
in the industry.
We call this benchmark Evolution C; and we have
officially incorporated it into this release of our newest,
Element II family of LED luminaires.
Evo/C is the kind of comprehensive approach that only
a lighting manufacturer with a decade-plus of production can advance.
Evo/C is more than just the lumen output of LEDs -- it’s more than the driver -- and it’s more than the housing.
Evo/C is synergy. It’s picking the best of everything; and constructing parts in-house when what is available isn’t
good enough.
Evo/C is hiring the smartest engineers in the business to design, build, test; then re-test until a fixture meets Visionaire’s
exacting standards.
Evo/C is about vertical integration within our own plant - Made in the USA.
2.

PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
VISIONAIRE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF VISIONAIRE LIGHTING IS PROHIBITED.
NEXT ASSY
APPLICATION
USED ON
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH 1 BEND 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .015
INTERPRET GEOMETRIC
TOLERANCING PER:
MATERIAL
FINISH
DO NOT SCALE DRAWING
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
NAME
DATE
19645 RANCHO WAY , RANCHO DOMINGUEZ, CA 90220
8 7 6
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
VISIONAIRE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF VISIONAIRE LIGHTING IS PROHIBITED.
D
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
VISIONAIRE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF VISIONAIRE LIGHTING IS PROHIBITED.
More Tailored Mounting Options For Maximum Versatility
Bolt-on arm
D
8 7 6 5 4 3 2 1
C
Mast arm
Wall mount
8 7 5
6 4 3 2 1
D
8 7 6
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
VISIONAIRE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF VISIONAIRE LIGHTING IS PROHIBITED.
Pendant mount
D
D
B
D
Bolt-on arm Quick Mount
C
C
Mast Arm Fitter End Mount
A
C
C
C
A
B
End Mount (Side)
End Mount (Front)
B
Ceiling mount
B
B
8
7
6
B
A
UNLESS OTHERWISE SPECIFIED:
JRTAPIA 5/26/11
TITLE:
VISIONAIRE LIGHTING
XX
A
A
8
7
6
5
4
--
PER ORDER --
3
SIZE
DWG. NO.
REV
UNLESS OTHERWISE SPECIFIED:
ELEMENT B II- ROUND MAF
SCALE: DIMENSIONS NTS WEIGHT:
ARE IN INCHES SHEET 1
DRAWN
OF 1
TOLERANCES:
2
FRACTIONAL ±
1
CHECKED
ANGULAR: ± 1 °
ENG APPR.
TWO PLACE DECIMAL ± .03
THREE PLACE DECIMAL ± .015 MFG APPR.
NAME
DATE
TITLE:
VISIONAIRE LIGHTING
19645 RANCHO WAY , RANCHO DOMINGUEZ, CA 90220
A
INTERPRET GEOMETRIC
TOLERANCING PER:
MATERIAL
FINISH
DO NOT SCALE DRAWING
A
Q.A.
COMMENTS:
SIZE
B
DWG. NO. REV
EL2-MA
SCALE: 1:4 WEIGHT:
SHEET 1 OF 1
Q1
8
7
6
5
4
3
2
1
8
7
3.
6

TESTED FOR LIFE
The secret to the Element II’s advanced efficiency is
superior heat reduction.
To get there, we built a powerhouse of a heat sink, and
designed it to make maximum use of the Venturi Effect.
Sinking the Heat – Successfully
In LED luminaires, the most critical areas to cool are the
junction points where the LEDs meet the circuit board.
The heat sink is used to draw heat away from these
points.
The Element II’s extruded aluminum heat sink is
substantial.
With a maximized fin ratio and precisely-mapped
channel distributions; thermal build-up peels away
from the Element II’s junction points, allowing for cooler
operation.
Feel the Breeze – the Venturi Effect
The Venturi Effect dictates that, with increased air flow,
heat transfer rates increase exponentially, removing heat
at ever-faster rates.
Hold your hand over the Element II, and feel it — that
rush of air rising up through the fixture, and out the top.
Engineering for this effect cools LEDs, drivers and
internal components; allowing the Element II to:
• Withstand higher ambient temperatures.
• Withstand higher drive currents.
• Achieve a low thermal resistance rating.
• Extend LED life.
This effect doesn’t occur with external, decorative heat
sinks -- like those found in competing products.
Combining heat sink technology with the Venturi Effect
produces a superior, long-lasting product with increased
light output.
6.

Element II, Size 1
Drive current of 350mA yields an L 70 of 150,000 hours.
Drive current of 530mA yields an L 70 of 100,000 hours.
Element II, Size 2
Drive current of 350mA yields an L 70 of 150,000 hours.
Drive current of 530mA yields an L 70 of 100,000 hours.
Element II, Size 3
Drive current of 350mA yields an L 70 of 150,000 hours.
Drive current of 530mA yields an L 70 of 100,000 hours.
Element II, Size 4
Drive current of 350mA yields an L 70 of 150,000 hours.
Drive current of 530mA yields an L 70 of 100,000 hours.
Element II, Size 5
Drive current of 350mA yields an L 70 of 150,000 hours.
7.

Evolution C
Pioneering the Benchmark for Ultimate
LED Performance
Visionaire Lighting’s Evolution C benchmark of luminaires
features the highest-lumen-output Light Emitting Diodes
on the market, outfitted with our proprietary, cutting edge
optics (patents pending).
Here’s why:
1. Highest available lumens per watt for maximum
efficiency.
2. Improved CRI (Color Rendering Index) for truer colors.
3. Tighter color binning for maximum Kelvin uniformity.
4. Lower forward voltages means lower system watts for
increased efficiency (Lumens/Watt).
5. Longer life for 350 and 530 mA.
6. Marginal decreases in efficiency between 350 and
530 mA.
The Element II’s VisionBar TM LED light assemblies come in
multiples of 24 (minimum 24 to maximum 288 LEDs), and
are field replaceable.
No other outdoor lighting manufacturer can offer your project
more efficient, cost-effective and application-specific LED
lighting solutions.
Superior Kelvin and CRI
The Element II is offered in two highly desirable
Kelvin temperatures, 4000K and 5500K. We
have selected these two Kelvin temperatures as
standard because 4000K matches the Kelvin of
typical metal halide fixtures and 5500K yields a
bluer white color which enhances car dealerships
and lower wattage applications. Both Kelvins
have similar lumen output. The CRI of the 4000K
LEDs are 70 and the CRI of the 5500K LEDs are
75. Please consult factory for additional Kelvin
temperatures which can be ordered as well as
LEDs with higher CRIs.
The Color Rendering Index, or CRI, is a measure of
the quality of color light as the human eye sees it.
Driver Power
The Element II is powered by a choice of 350 or 530
mA high‐performance Constant Current Philips
Advance Xitanium LED drivers, which accept
120v thru 277v, 50 Hz to 60 Hz, input. Power
factor of 90%. Rated for -40 oC operations.
Expected life of the driver ranges from 100,000 to
150,000 hours.
1) The LED driver reduces output power to LEDs
if its maximum allowable case temperature is
exceeded.
2) The LED driver complies with UL standard
UL1012.
3) The LED driver has a Class A sound rating.
4) The LED drivers comes dimming enabled with
a 0-10 volt input.
5) The LED driver has a THD (Total Harmonic
Distortion) of less than 20%.
8.

Why Dim LEDs?
Dimming LEDs saves energy at an approximate 1:1 ratio.
This means by dimming the LEDs to 50% of their light
output, the LEDs’ energy usage will decrease by nearly
50%. Dimming LEDs also makes them run cooler, which
extends the life of the driver, as well as doubling or tripling
the LEDs lumen maintenance. Select the dimming type,
then schedule settings and, in the case of Dual Circuit,
add optional motion sensor. LED luminaires really earn
their worth when controls are applied. Consider choosing
one of the following options to achieve the ultimate return
on your investment.
1. Analog 0 – 10 Volt
A pre-installed 0 - 10 volt driver enables the fixture to be
operated by a separately-provided control system.
2. Dual Circuit (DC)
Separate driver circuits provide two levels of light
(high and low) without requiring a controller. Can be tied to
an optional motion sensor.
3. Event-Based Dimming (EB)
Luminaires arrive installed with controls that are preprogrammed
to trigger up to five, timed events of varying
dimming percentages.
See the Event-Based Dimming Example Chart below.
4. Wireless Controls (WC)
Enables event-based dimming to be modified remotely
after pre-programmed fixtures are installed.
• Triggers up to 32 events.
• Provides outage notifications.
• Monitors energy consumption.
Optional Motion Sensor
Activity close to the luminaire triggers an event of 100%
brightness lasting for several minutes. Afterwards,
illumination returns to the level of the current event.
Examples:
• Two drivers → a 50% reduction in output.
• Three drivers → a 33% or 67% reduction in output.
9.

10.

Performance Starts with Optics that Outpace All Others
Visionaire Lighting’s proprietary optics are the industry leader. Patent pending lens designs produced in-house simply
can’t be duplicated by others. Painstakingly developed by our Photometrics team, these nine optic types give the
Element II an edge; allowing us to manufacture fixtures that illuminate beautifully at lower wattages and wider pole
spacings. To learn more, visit our Photometrics website section; or call us for layout assistance.
A Superior Line-up of Optics
pe I
1
e II
2e II
2
-R
-R
e III
3e III
3
-R
-R
Type V
Type IV
Type III Type II Type I
Optics Isolux Type Pattern I Best Application(s) Type II Type III Key Feature(s) Type IV Type V
1
2
3
4
5
• One- and two-lane roadways. Enables pole spreads at six to eight times mounting height
Type I
Type II • Long Type pedestrian III paths. Type IV to achieve Type intersection. V
Type 1 I
Type 2 II • Warehouse Type 3 IIIaisles.
Type 4 IV Type 5 V
1
2
3
4
5
• Parking 2-R lots.
3-R Best where sideways 4-A light is required 5W at light levels greater
II
• Street-adjacent back lots. than one Footcandle.
2-R
3-R
4-A
5W
2-R • Two-, three- 3-R and four-lane 4-A Optimal for staggered 5W light spacing requirements.
roadways.
4+CLS
Type II Type III Type IV Type V
II-R
2
3
4
5
Type III Type IV • Four- Type to six-lane V roadways. 4+CLS Designed for side light, 45 o light, and forward
• Cross walks.
4+CLS
Type 3
light applications requiring light levels of one or
III
Type 4
III
IV
Type 5
V
3
• Site perimeters.
more Footcandles.
4
5
2-R
3-R
4-A
• Shopping centers.
5W
Effective for forward-light applications that require a half a
• Office complexes.
Footcandle or more across distances.
3-R IV
4-A
5W
3-R
4-A
5W
• Auto dealerships.
Best where a combination of high Footcandles at low
4+CLS
• High-brightness inspection wattages are required.
IV-A
areas.
Type IV
Type 4
IV+CLS
4
V
4-A
4-A
V-W
4+CLS
4+CLS
4+CLS
Type 4+CLS
V
Type 5 V
5
5W
5W
• LEEDs projects.
• High-clearance parking
structures.
• Low-clearance parking
structures.
• Outdoor parking areas.
Useful for projects requiring pristine back light control and
zero light trespass.
Excellent for low mounting-height installations requiring
minimums of one Footcandle.
Best for 400+ wattage requirements, and retrofitting
vertical lamp fixtures at typical 120x120 or
180 x180 spacings.
A = Automotive . R = Roadway . W = Wide . +CLS = with external Cutoff Louver Shield option.
For additional LEEDS-qualifying shields, please consult factory.
11.

Our new Type Five optic designed for large parking lots enables 400 watt fixtures to be replaced at a
lower wattage without photopic light level sacrifice with improved uniformity.
Twin Element II Fixtures - End Mount
EL2-4-T5W-168LC-530-4000K
275 system watts
Type Five Wide distribution
120 foot by 120 foot spacing
33 foot mounting height
Full cutoff
12.

Our new Type Four optic with Cutoff Louver System is designed for the most stringent light trespass
criteria, cutting the light behind the luminaire to .01 foot candles at 3/4 mounting height.
Single Element II Fixture - Bolt-On Arm
EL2-3-T4-120LC-530-4000K-CLS
190 system watts
Type Four distribution with Cutoff Louver System
60 foot spacing
25 foot mounting height
Full cutoff
13.

(LIFE) Let us Find the Perfect
Balance for Your Specific
Application
The L70 test determines the point in an LED’s life
when it reaches 70 percent of its initial output.
Element II series LEDs have been determined to
last 150,000+ hours in 40 o C environments when
driven at 350 mA.
At Visionaire Lighting, we have discovered that
the secret to the perfect LED fixture fit is to
determine the perfect balance between number of
VisionBars TM and the milliamps to drive them at.
More Lumens per Dollar
In an exceptionally well-cooled fixture like the
Element II, it becomes possible to drive fewer LEDs
at higher milliamps. Fewer LEDs putting out more
lumens creates the right amount of light for the job,
while at the same time reducing the initial cost of
the luminaire.
14.

HID to LED Crossovers
Return on Investment (ROI) per single fixture retrofit. A Brilliant Performer FINANCIALLY, TOO!
Existing
Wattage
System
Watts
HPS
Life Hours
Proposed
Element II
Configuration
Street Lighting Crossovers
System
Watts
LED L70
Life Hours
Watts
Saved
Energy
Saved
10 Year
Energy
Savings*
10 Year
Maintenance
Payback**
10 Year
Total
Savings**
400 HPS 464 24,000 EL2-3-120LC-530 190 100,000 274 59% $1,434 $332 $1,766
250 HPS 295 24,000 EL2-1-96LC-530 152 100,000 143 48% $750 $332 $1,082
200 HPS 250 24,000 EL2-1-72LC-530 114 100,000 136 54% $710 $332 $1,042
150 HPS 188 24,000 EL2-1-72LC-530 114 100,000 74 39% $380 $332 $712
100 HPS 130 24,000 EL2-1-48LC-530 76 100,000 54 41% $270 $332 $602
70 HPS 91 24,000 EL2-1-48LC-350 56 150,000 35 38% $170 $332 $502
*Savings calculated on 12 hours of usage/night, 7 nights/week, at 12¢/kilowatt-hour.
**Estimated cost of replacing 1 HPS lamp every 6 years, including equipment rental, parts and labor.
Existing
Wattage
System
Watts
MH
Life Hours
Proposed
Element II
Configuration
Parking Lot Lighting Crossovers
System
Watts
LED L70
Life Hours
Watts
Saved
Energy
Saved
10 Year
Energy
Savings*
10 Year
Maintenance
Payback**
10 Year
Total
Savings**
400 MH 458 20,000 EL2-3-144LC-530 228 100,000 230 50% $1,500 $398 $1,898
250 MH 295 20,000 EL2-1-96LC-530 152 100,000 143 48% $935 $398 $1,333
175 MH 210 15,000 EL2-1-72LC-530 114 100,000 96 45% $630 $398 $1,028
100 MH 129 20,000 EL2-1-48LC-530 76 100,000 53 41% $350 $398 $748
70 MH 90 12,000 EL2-1-48LC-350 56 150,000 34 37% $220 $398 $618
*Savings based on 12 hours of usage/night, 7 nights/week, at 12¢/kilowatt-hour.
**Estimated cost of replacing 1 MH lamp every 5 years, including equipment rental, parts and labor.
Existing
Wattage
System
Watts
MH
Life Hours
Parking Garage Lighting Crossovers
Proposed
Element II
Configuration
System
Watts
LED L70
Life Hours
Watts
Saved
Energy
Saved
10 Year
Energy
Savings*
10 Year
Maintenance
Payback**
10 Year
Total
Savings**
175 MH 210 15,000 EL2-1-48LC-530 76 100,000 134 64% $1,769 $500 $2,269
175 MH 210 15,000 EL2-1-72LC-350 84 150,000 126 60% $1,663 $500 $2,163
150 MH 188 15,000 EL2-1-48LC-530 76 100,000 112 60% $1,478 $500 $1,978
150 MH 188 15,000 EL2-1-72LC-350 84 150,000 104 55% $1,373 $500 $1,873
100 MH 129 20,000 EL2-1-48LC-350 56 150,000 73 57% $964 $500 $1,464
70 MH 90 12,000 EL2-1-24LC-530 38 100,000 52 58% $686 $500 $1,186
*Savings based on 24 hours of usage/night, 7 nights/week, at 12¢/kilowatt-hour.
**Estimated cost of replacing 1 MH lamp every 2.5 years, including parts and labor.
15.

D
C
B
A
8 7 6 5
4 3 2 1
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
VISIONAIRE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF VISIONAIRE LIGHTING IS PROHIBITED.
8
7
6
5
NEXT ASSY
APPLICATION
4
USED ON
UNLESS OTHERWISE SPECIFIED:
NAME DATE
VISIONAIRE LIGHTING
19645 RANCHO WAY , RANCHO DOMINGUEZ, CA 90220
DIMENSIONS ARE IN INCHES DRAWN JRTAPIA 5/26/11
TOLERANCES:
FRACTIONAL
CHECKED
TITLE:
ANGULAR: MACH 1 BEND 1
ENG APPR.
A
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .015 MFG APPR.
INTERPRET GEOMETRIC
Q.A.
TOLERANCING PER:
COMMENTS:
MATERIAL
--
SIZE DWG. NO.
REV
FINISH
PER ORDER --
DO NOT SCALE DRAWING
SCALE: NTS WEIGHT: SHEET 1 OF 1
3
2
1
D
C
B
Area
A
Front View
A
E
Side View - EBOA
C
Fixture A B C D E Max. LEDs Lbs
EL2-S 14” 14½” 4” 21½” n/a 72 30
EL2-1 18” 14½” 4” 21½” 38” 96 34
EL2-2 24” 14½” 4” 21½” 42” 144 38
EL2-3
EL2-4
EL2-5
28”
32”
38”
14½”
14½”
14½”
4”
4”
4”
21½” 28½”
21½” 32½”
21½” 48½”
144
192
288
41
62
68
B
B
D
Side View
BOLT-ON ARM
Garage/Canopy
A
Top View
A
E
Side View - EMAF
C
B
Side View/End Cap
XX
ELEMENT B II- ROUND MAF
Type I
ype II
ype III
Model Optics Source Milliamps Kelvin Voltage Mounting Finish Options
EL2-S
Type II
Type II Type III Type
4000K
IV
120-277
Type V
# of LEDs mA
Bolt-On Arm White
(T1)
1
2
3
4*Neutral
*Universal 5
(BOA)
(WH)
24 (24LC) 350 530 white voltage
48 (48LC) 350 530 (4K) (UNV) Wall Mount
Type I
Type II
II
Type III
Type IV
Type V
*Includes Cast Wall Plate
1
2 72 (72LC) 2-R
3 350 3-R
4 n/a 4-A 5500K
5 480 5W
(T2)
(WM)
(3) (5)
*Cool (5)
white
Knuckle Mount
Bronze
EL2-1
24 (24LC) 350 530 (55K) 347 (KM)
(BZ)
Type II-R
2-R
48 (48LC)
3-R
350 4-A
530
(8)
(T2R)
4+CLS
5W
Mast Arm Fitter
72 (72LC) 350 530
(MAF)
Type II
Type III
III 96 Type (96LC) IV Type 350 V 530
(3) (5)
Ceiling Mount Black
2
3
4
4+CLS 5
(T3)
(CM)
(BK)
EL2-2
120 (120LC) 350
144 350
Pendant Mount
Type III
Type IV
Type (144LC) V
*Specify pendant Iength
2-R 3
3-R 4
4-A 5
(T4)
(3)
5W
(PM)
EL2-3
120 (120LC) 530
Grey
End Mount (GY)
Type IV-A 144 (144LC) 530
Bolt-On
3-R
4-A
4+CLS 5W
(T4A)
(5)
(EBOA)
EL2-4
168 (168LC) 350 530
End Mount
Type IV
Type V
*Requires 2-3/8”
Silver Metallic
4
4+CLS
(T5)
5 192 (192LC) 350 530
horizontal tenon
(3) (5)
(EMAF)
(SL)
*End mount only
EL2-5
*End 4-A mount only
4+CLS
Type V-W
(T5W)
216 (216LC)
240 (240LC)
264 (264LC)
288 (288LC)
350
350
350
350
(3)
Custom Color
(CC)
Photocell & Receptacle
*Specify voltage
(PCR120) (PCR208)
(PCR240) (PCR277)
Photo Receptacle (PER)
*With shorting cap
Button Type Photocell
*Specify voltage
(PC120) (PC208)
(PC240) (PC277)
Round Pole Plate Adaptor
For 4ӯ Pole (RPP4)
For 5ӯ Pole (RPP5)
Element Conduit Box
(ECB)
Cutoff Louver System
(CLS)
Vandal Resistant Shield
(VRS)
Dual Circuit
(DC)
Motion Sensor
(MS)
Dimming/Controls
*Consult factory
16.

Housing
• The fixture housing is heavy-duty, extruded aluminum, with
heat radiating fins. A perforated aluminum top cover, beneath
a protective debris guard, protects the heat radiating fins
from contaminants and directs constant air flow over them for
maximum cooling.
Thermal Management
• The Element II provides excellent overall thermal management
by maximizing the fixture’s heat sink efficiency. This enables the
Element II to withstand higher ambient temperatures and drive
currents without degrading LED life. The Element II has a low
thermal resistance rating. The heat radiating fins and perforated
fixture components create superior thermal management results.
• The L70 test determines the point in an LEDs life when it reaches
70 percent of its initial output. Element II series LEDs have been
determined to last 150,000+ hours in 40 o C environments when
driven at 350 mA. See LED Data Chart for additional test results.
Optical System
• The highest lumen output LEDs available are utilized in the
Element II series. IES Types III and V distributions are standard.
The LED VisionBar TM light assemblies come in multiples of 24
(minimum 24 to maximum 288 LEDs) and are field replaceable.
The optical system qualifies as IES full cutoff; and is Dark-Sky
certified to restrict light trespass, glare and light pollution.
Quali-Guard ® Finish
• A Quali-Guard ® thermoset polyester powder coat painted finish
is available in white and custom colors.
Mounting - Area
•BOA- The cast aluminum Bolt-on Arm is shipped mounted to
the fixture. A pole plate is supplied for mounting to the pole; which
allows for quick and easy fixture installation with two set screws.
•WM- Galvanized steel wall mount bracket can be secured
directly to recessed junction box or the wall. The fixture is supplied
with a shortened arm bracket to keep the fixture closer to the wall.
•CM- Steel ceiling mount bracket can be secured directly to
recessed junction box, or to the ceiling. The housing hanger
bracket allows fixture to be suspended from ceiling bracket while
making wiring connection. The housing bracket then attaches
to the ceiling bracket via a tool-less latch. A tamper-proof screw
can then secure the bracket.
•KM- Knuckle Mount will mount over a 2⅜” horizontal or vertical
tenon and is field adjustable in increments of 5°
•MAF- Mast arm fitter is provided with a cast aluminum arm
adaptor designed to slip fit over a 1¼” to 2” horizontal tenon
(mast arm) and is adjustable +/- 5 degrees for fixture leveling.
EPA Data
Fixture
with Arm
EL2-S
EL2-1
.6
.7
.8
.9
1.3
1.3
1.1
1.2
1.1
1.2
1.1
1.2
An internal clamping device provides a secure attachment to the
mast arm, eliminating the need to drill for thru-bolt attachment.
•EBOA- End Mount version utilizing the same Quick Mount pole
adaptor for a bolt-on application
•EMAF- End Mount Mast Arm Fitter is provided with a cast
aluminum arm adaptor designed to slip fit over a 2” horizontal
tenon (mast arm) and is fully adjustable.
A round pole plate adaptor is required for mounting to a 3”- 6”
round pole.
Mounting - Roadway
• The Element II - Roadway is provided with a cast aluminum
arm adaptor designed to slip fit over a 1¼” to 2⅜” horizontal tenon
(mast arm) and is adjustable +/- 5 degrees for fixture leveling.
An internal clamping device provides a secure attachment to the
mast arm, eliminating the need to drill for thru-bolt attachment.
Mounting - Garage/Canopy
• Steel ceiling mount bracket can be secured directly to recessed
junction box, or to the ceiling. The housing hanger bracket allows
fixture to be suspended from ceiling bracket while making wiring
connection. The housing bracket then attaches to the ceiling
bracket via a tool-less latch. A tamper-proof screw can then
secure the bracket.
Electrical Assembly
• The Element II is supplied with a choice of 350 or 530 mA
high‐performance LED drivers that accept 120 v thru 277 v,
50 Hz to 60 Hz, input. Power factor of 90%. Rated for -40 o C
operations.
Solar Vision Pole TM Option
• The Element II LED is compatible for use with Visionaire Lighting’s
Solar Vision Pole TM . Power up to 100 watts (SMR-2 rigid panel)
off‐the‐grid in any locale.
Warranty
• Five (5) year Limited Warranty on entire system, including finish.
For full warranty information, visit VisionaireLighting.com.
Options
• Photocell & receptacle • Cutoff louver system
• Photo receptacle
• Vandal-resistant shield
• Button type photocell • Dual circuit
• Round pole plate adaptor • Motion sensor
• Element conduit box
• Dimming/Controls
Please consult factory for custom options and available
upgrades
Listings
• Element II is listed, suitable for wet locations.
• LM79 and LM80.
• IP65 Listed.
• Dark‐Sky Friendly ® , full cutoff certified by the International
Dark‐Sky Association.
• Meets ANSI C136.31-2001 Vibration Standards at 2G when
ordered with the MAF mounting option.
• DLC Listed.
• RoHS compliant.
• Powder Coated Tough TM .
EL2-2
.8
1.0
1.3
1.4
1.4
1.4
EL2-3
EL2-4
End Mount Only
EL2-5
End Mount Only
.9
1.2
1.3
1.5
1.5
1.5
1.2
1.3
1.6
1.7
2.4
2.3
2.6
2.7
2.6
2.6
2.7
2.7
17.

LED Data Chart
# Bars # LEDs
1
EL2-1
24
Output
mA
Initial
Lumens
Type 1
LED Data Chart for 5500K*
Initial
Lumens
Type 2
Initial
Lumens
Type 2R
Initial
Lumens
Type 3
Initial
Lumens
Type 4
Initial
Lumens
Type 4A
Initial
Lumens
Type 5
Initial
Lumens
Type 5W
System
Watts
120-277
L 70
Hours
@ 40° C
350 2263 2362 2226 2250 2262 2352 2375 2380 28 150,000
530 2520 2841 2470 2776 2684 2691 3030 3047 38 100,000
2
EL2-1
3
EL2-1
4
EL2-1
48
72
96
350 4526 4724 4452 4501 4525 4704 4750 4760 56 150,000
530 5042 5683 4940 5553 5368 5382 6087 6094 76 100,000
350 6789 7086 6678 6483 6786 7056 7125 7140 84 150,000
530 7563 8524 7410 8330 8052 8073 9128 9141 114 100,000
350 9052 9448 8904 8645 9048 9408 9500 9520 112 150,000
530 9923 11365 9880 11107 10736 10764 12174 12188 152 100,000
5
EL2-2
120 350 11315 11810 11130 10212 11310 11760 11875 11900 140 150,000
5
EL2-3
120 530 12405 14207 12350 13884 13440 13457 15216 15235 190 100,000
6
EL2-2
144 350 13588 14172 13356 12255 13572 14112 14250 14280 168 150,000
6
EL2-3
144 530 14885 17048 14820 15260 16128 16146 18260 18816 228 100,000
7
EL2-4
8
EL2-4
168
192
350 15841 16534 15582 14297 15834 16464 16625 16640 196 150,000
530 17367 19890 17290 17803 18788 18837 19418 21818 266 100,000
350 18105 18896 17808 16341 18096 18816 19000 19040 224 150,000
530 19847 22780 19760 20000 21472 21528 22191 24366 304 100,000
9
EL2-5
216 350 20367 21258 20034 20560 20358 20168 21004 21420 252 150,000
10
EL2-5
240 350 22630 23620 22260 22600 22620 23520 23008 23800 280 150,000
11
EL2-5
264 350 24893 25982 24486 24640 24882 25872 25012 26180 308 150,000
12
EL2-5
288 350 27176 28344 26712 26680 27144 28224 27016 28560 336 150,000
Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.
* For 4000K multiply values by 0.97
03.07.12
18.

A Product That’s Road Tested
LED Lighting Facts Approved
The LED Lighting Facts® is a program of the U.S. Department of Energy that
showcases LED products for general illumination from manufacturers who commit to
testing products and reporting performance results according to industry standards.
For lighting buyers, designers, and energy efficiency programs, the LED Lighting Facts
label provides information essential to evaluating products and identifying the best
options.
DesignLights Consortium TM Qualified
The DesignLights Consortium’s mission is to help builders, architects, designers and
commercial property owners implement improved design practices in all areas of the
commercial lighting market. The DLC independently tests and rates fixtures. Approved
fixtures may then qualify for funding from energy companies nationwide. Think of them
as the EnergyStar of outdoor lighting. More at: www.designlights.org
Dark-Sky Certified
The Element II’s optical system qualifies as IES full cutoff; and is Dark-Sky certified to
restrict light trespass, glare and light pollution. More at www.darksky.org
ETL Certified
The ETL Listed Mark is proof of product compliance to North American safety
standards. Authorities Having Jurisdiction (AHJ’s) in 50 states and Canada and
retailers accept the ETL Listed Mark as proof of product safety. Safety standard test
practices conform to UL, ANSI, CSA, ASTM, NFPA, and NOM.
IP65 Rated
As defined in international standard IEC 60529, IP Code classifies and rates the
degrees of protection provided against the intrusion of solid objects, dust, accidental
contact, and water in mechanical casings and with electrical enclosures.
RoHS Certified
The RoHS directive aims to restrict certain dangerous substances commonly used in
electronic equipment. Any RoHS compliant component must have 100ppm or less of
mercury.
ANSI Certified
The Element II is ANSI C136.31-2001 certified for luminaire vibration at 2G.
19.