Element II - Area Brochure - Visionaire Lighting, LLC

TESTED FOR LIFE
The secret to the Element II’s advanced efficiency is
superior heat reduction.
To get there, we built a powerhouse of a heat sink, and
designed it to make maximum use of the Venturi Effect.
Sinking the Heat – Successfully
In LED luminaires, the most critical areas to cool are the
junction points where the LEDs meet the circuit board.
The heat sink is used to draw heat away from these
points.
The Element II’s extruded aluminum heat sink is
substantial.
With a maximized fin ratio and precisely-mapped
channel distributions; thermal build-up peels away
from the Element II’s junction points, allowing for cooler
operation.
Feel the Breeze – the Venturi Effect
The Venturi Effect dictates that, with increased air flow,
heat transfer rates increase exponentially, removing heat
at ever-faster rates.
Hold your hand over the Element II, and feel it — that
rush of air rising up through the fixture, and out the top.
Engineering for this effect cools LEDs, drivers and
internal components; allowing the Element II to:
• Withstand higher ambient temperatures.
• Withstand higher drive currents.
• Achieve a low thermal resistance rating.
• Extend LED life.
This effect doesn’t occur with external, decorative heat
sinks -- like those found in competing products.
Combining heat sink technology with the Venturi Effect
produces a superior, long-lasting product with increased
light output.
6.